- 30 Mar, 2009 40 commits
-
-
Trent Piepho authored
There are many RW ioctls() in v4l2 where userspace only supplies one or two of the first fields in the structure passed to the ioctl. The driver then fills in the rest of the fields. Instead of copying the entire structure from userspace to the kernel we only need to copy those fields that userspace is actually supposed to supply. What's more, the fields that are meant to be only be output from the driver can be zeroed out in the videodev code, in case the driver doesn't fill them all in. Many of the ioctl handlers in v4l2_ioctl do this already, but my patch does this at one common point and so all the memsets for each ioctl can be deleted. For VIDIOC_G_SLICED_VBI_CAP, which has one input field ('type') and other output-only fields, the input field is near the end of the structure instead of at the beginning. So there is still a memset in it's ioctl handler to zero out the beginning of the struct. There were a couple mistakes with the existing code: For VIDIOC_G_AUDIO the index field was preserved, but G_AUDIO is a read only ioctl so nothing is copied from userspace to preserve. For VIDIOC_G_FREQUENCY the tuner field was not preserved like it should have been. This would be a problem if there was any hardware with more than one tuner/modulator. For VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS, none of the fields were preserved even though each ioctl has several field that are supposed to be inputs to the driver! Obviously these ioctls don't get used much. The index field is needed if the driver has multiple discrete sizes/rates and other fields can be used too, e.g. if the size depends on pixel format or frame rate depends on image size for example. Signed-off-by:Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Igor M. Liplianin authored
It was a typo in the function name, it should be lnbh24_attach, and not lnbp24_attach. Signed-off-by:
Igor M. Liplianin <liplianin@netup.ru> Signed-off-by:
-
Igor M. Liplianin authored
Add support for NetUP Dual DVB-S2 CI card The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips, STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator. http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CISigned-off-by:
-
Igor M. Liplianin authored
Add last piece of code to support ST STV0900 dual demodulator. The IC consist of two dependent parts. It may use single or dual mode. Signed-off-by:
-
Igor M. Liplianin authored
Signed-off-by:
-
Igor M. Liplianin authored
Signed-off-by:
-
Igor M. Liplianin authored
The IC consist of two dependent parts. It may use single or dual mode. Signed-off-by:
-
Igor M. Liplianin authored
The controller consist of two independent parts. Every part is similar to LNBP21, but has configurable i2c address. It is used in NetUP Dual DVB-S2 CI card. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CISigned-off-by:
-
Igor M. Liplianin authored
The tuner is used in NetUP Dual DVB-S2 CI card. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CISigned-off-by:
-
Abylay Ospan authored
Add CIMax2 Common Interface code for NetUP Dual DVB-S2 CI card. SmarDTV CIMax(R) SP2 is Dual CableCARD, DVB Common Interface and OpenCable Hardware Controller. Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Abylay Ospan authored
Signed-off-by:
-
Abylay Ospan authored
Add init code for NetUP Dual DVB-S2 CI card The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips, STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator. Signed-off-by:
-
Trent Piepho authored
For VIDIOC_QUERYBUF only the first two fields, size and type, are used as input. The rest can be filled in by the driver as output. Most drivers do not actually use all the field and unused ones should be zeroed out. Some drivers have code to do this and some drivers should but don't. So put some zero out code in v4l2_ioctl so that all drivers using that system get it. The drivers that have zeroing code get that code removed. Some drivers checked that the type field was valid, but v4l2_ioctl already does this so those checks can be removed as well. Signed-off-by:
-
Trent Piepho authored
A recent patch added a forward declaration of cx88_core right before the main definition of that structure, which is obviously unneeded. Signed-off-by:
-
Trent Piepho authored
video_register_device_index() checks if it was passed a NULL video_device pointer (which isn't allowed) _after_ it has already dereferenced it with video_get_drvdata(vdev). The checks are clearly pointless and can be removed, as the function would have crashed before reaching them if vdev ever was NULL. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Asaf Fishov <afishov@maxlinear.com> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
report TUNER_STATUS_LOCKED if rf_locked or ref_locked Signed-off-by:
-
Michael Krufky authored
This function does not work properly and is not necessary - remove it for now. Signed-off-by:
-
Michael Krufky authored
Analog doesn't work in this driver yet. This code just adds extra bloat, so remove it for now. Signed-off-by:
-
Michael Krufky authored
Fix the following build error: drivers/media/dvb/siano/smsusb.o: In function `get_order': include/asm-generic/page.h:10: multiple definition of `sms_dbg' drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here drivers/media/dvb/siano/smsdvb.o: In function `get_order': include/asm-generic/page.h:10: multiple definition of `sms_dbg' drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here Thanks to Mauro Carvalho Chehab for his original patch to address this issue. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Several modules were converted to V4L2 API. Update their dependencies on Kconfig. Signed-off-by: -
Andy Walls authored
Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
Driver is now at version 1.1.0. Signed-off-by:
-
Andy Walls authored
Remove variables that were holdovers from ivtv for supporting the CX23415 MPEG decoder output. Signed-off-by:
-
Andy Walls authored
Give messages originating from internal subdevs a header using the subdev's name. Fixed an uninitialized variable problem with reading the EEPROM, noticed from log output. Got rid of the unused cx18_av_exit() function. Signed-off-by:
-
Andy Walls authored
We leaked buffers every time a device was removed, if the user had enabled sliced VBI insertion into the MPEG stream. MythTV uses that. Signed-off-by:
-
Andy Walls authored
Convert GPIO line functions, such a audio routing and device resets, to v4l2_subdevices. This essentially completes the conversion of cx18 to the v4l2_device/v4l2_subdevice framework. No regression testing has taken place as of yet. Also an ivtv legacy bug with GPIO mux routing and going to/from radio mode was commented, but not fixed. Signed-off-by:
-
Andy Walls authored
This is a major perturbation to cx18 I2C device handling to convert it to the v4l2_device/subdeivce framework. This change breaks GPIO audio multiplexer control for the time being. It will be fixed in a coming change. Signed-off-by:
-
Andy Walls authored
Added a new chip identifer to v4l2-chip-ident for the integrated A/V broadcast decoder core internal to the CX23418. Completed separation and encapsulation of the A/V decoder core interface as a v4l2_subdevice. The cx18 driver now compiles and links again. Signed-off-by:
-
Andy Walls authored
Convert card instance handling to a lighter weight mechanism like ivtv. Also convert name strings and debug messages to use v4l2_device.name. Signed-off-by:
-
Andy Walls authored
This is the next step in converting the cx18 driver to use the v4l2_device/ v4l2_subdevice framework. This is a straightforward conversion of the cx18_av_*[ch] files. It compiles, but leaves the driver in an unlinkable state at the moment. Note, the cx18 integrated A/V digitizer will now make a host match at address 1, as far as v4l2-dbg is concerned. That means it identifies itself as a separate "chip", and acts as an alias to the integrated A/V decoder registers that are also available with the host match at address 0. Signed-off-by:
-
Michael Krufky authored
As pointed out by Mauro Chehab, we should always use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL wherever possible. A message was posted to the linux-media mailing list about this, checking with Uri Shkolnik of Siano Mobile Silicon if this is okay to convert. As per Uri's response to this email, it is OK for us to make this conversion. http://www.spinics.net/lists/linux-media/msg02200.htmlSigned-off-by:
-
Michael Krufky authored
The smsdvb module was separated from the core and usb code. This change loads smsdvb automatically for driver configurations that depend on it. Signed-off-by:
-
Michael Krufky authored
Fix checkpatch.pl violations introduced by previous changeset: ERROR: do not use C99 // comments 156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373: +//#ifdef DVB_CORE ERROR: do not use C99 // comments 157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374: +// smsdvb_unregister(); ERROR: do not use C99 // comments 158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375: +//#endif WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380: +EXPORT_SYMBOL(smscore_onresponse); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381: +EXPORT_SYMBOL(sms_get_board); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382: +EXPORT_SYMBOL(sms_debug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383: +EXPORT_SYMBOL(smscore_putbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384: +EXPORT_SYMBOL(smscore_registry_getmode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385: +EXPORT_SYMBOL(smscore_register_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386: +EXPORT_SYMBOL(smscore_set_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387: +EXPORT_SYMBOL(smscore_start_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388: +EXPORT_SYMBOL(smsusb_id_table); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389: +EXPORT_SYMBOL(smscore_unregister_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390: +EXPORT_SYMBOL(smscore_getbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391: +EXPORT_SYMBOL(smscore_get_device_mode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392: +EXPORT_SYMBOL(smscore_register_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393: +EXPORT_SYMBOL(smscore_unregister_hotplug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394: +EXPORT_SYMBOL(smsclient_sendrequest); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395: +EXPORT_SYMBOL(smscore_unregister_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396: +EXPORT_SYMBOL(smscore_get_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397: +EXPORT_SYMBOL(smscore_register_hotplug); WARNING: line over 80 characters 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); ERROR: "foo* bar" should be "foo *bar" 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); WARNING: line over 80 characters 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: "foo* bar" should be "foo *bar" 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: space required after that ',' (ctx:VxV) 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443: + printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event); WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455: + printk(KERN_INFO "%s Entering.\n", __FUNCTION__); ERROR: space prohibited before that '++' (ctx:WxB) 505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459: + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++) ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471: + __FUNCTION__, rc); Signed-off-by: -
Uri Shkolnik authored
Import the following changes from Uri Shkolnik * Two-ways merge with Siano internal repository * Continuing with DVB sub-system separation * kconfig and makefile updates * Code cleanup This is a work-in-progress sync with Siano's internal repository. Some changes had to be altered or dropped in order not to break the build. This breaks normal operation for the current driver, but it is being committed now for tracking purposes. These changes introduce the following checkpatch.pl violations: ERROR: do not use C99 // comments 156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373: +//#ifdef DVB_CORE ERROR: do not use C99 // comments 157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374: +// smsdvb_unregister(); ERROR: do not use C99 // comments 158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375: +//#endif WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380: +EXPORT_SYMBOL(smscore_onresponse); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381: +EXPORT_SYMBOL(sms_get_board); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382: +EXPORT_SYMBOL(sms_debug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383: +EXPORT_SYMBOL(smscore_putbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384: +EXPORT_SYMBOL(smscore_registry_getmode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385: +EXPORT_SYMBOL(smscore_register_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386: +EXPORT_SYMBOL(smscore_set_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387: +EXPORT_SYMBOL(smscore_start_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388: +EXPORT_SYMBOL(smsusb_id_table); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389: +EXPORT_SYMBOL(smscore_unregister_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390: +EXPORT_SYMBOL(smscore_getbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391: +EXPORT_SYMBOL(smscore_get_device_mode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392: +EXPORT_SYMBOL(smscore_register_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393: +EXPORT_SYMBOL(smscore_unregister_hotplug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394: +EXPORT_SYMBOL(smsclient_sendrequest); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395: +EXPORT_SYMBOL(smscore_unregister_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396: +EXPORT_SYMBOL(smscore_get_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397: +EXPORT_SYMBOL(smscore_register_hotplug); WARNING: line over 80 characters 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); ERROR: "foo* bar" should be "foo *bar" 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); WARNING: line over 80 characters 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: "foo* bar" should be "foo *bar" 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: space required after that ',' (ctx:VxV) 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443: + printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event); WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455: + printk(KERN_INFO "%s Entering.\n", __FUNCTION__); ERROR: space prohibited before that '++' (ctx:WxB) 505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459: + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++) ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471: + __FUNCTION__, rc); total: 7 errors, 23 warnings, 524 lines checked Signed-off-by:Uri Shkolnik <uris@siano-ms.com> Signed-off-by:
-
