Be sure we clear out both the mic (if applicable) and
the encryption key type.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

* In set_opmode don't handle antenna settings and preserve other STA_ID1 settings
(shouldn't matter because we call it during reset but it makes things cleaner)
Also set properly AP/ADHOC indicator flag on CFG while setting AP/ADHOC modes
and always enable key search mode.

* Properly set BSSID Mask during reset (cache it and reuse it durring set_associd)

* Update beacon_init to flush pending BMISS interrupts and handle setting of adhoc
beacon ATIM policy flag for ad-hoc mode. Also set TSF to 0 to start TSF increment
on AP mode. We need to handle sleep timers for AR5212 there + add support for PCF.

* Properly clean MIC key from keytable when TKIP is used (Bob is working on set_key
function etc so i leave it for now).

Tested on AR5212 (Hainan) and AR5413 and works fine

v2 Set PISR on AR5211+ and ISR on AR5210, got to sleep more ;-)

Changes-Licensed-under: ISC
Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Convert all the drivers using net/ieee80211.h to use linux/ieee80211.h.
Contains a bugfix in libertas where the SSID parsing could overrun the
buffer when the AP sends invalid information.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Dan Williams <dcbw@redhat.com> [airo, libertas]
Acked-by: Pavel Roskin <proski@gnu.org> [orinoco]
Acked-by: David Kilroy <kilroyd@googlemail.com> [orinoco]
Signed-off-by: John W. Linville <linville@tuxdriver.com>

I added this comment myself, but it's clearly wrong. I had meant
to place it in iwl_mac_add_interface, which at the time didn't
honour the MAC address setting, but it does now.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Remove the SSID from the driver API since now there is no
driver that requires knowing the SSID and I think it's
unlikely that any hardware design that does require the
SSID will play well with mac80211.

This also removes support for setting the SSID in master
mode which will require a patch to hostapd to not try.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Since adm8211 currently doesn't implement IBSS mode anyway,
it can't be using the SSID. And if/when it does implement
IBSS mode, we'll have to see how to make it beacon anyway.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The SSID programmed into the device is used by the ucode only
to reply to probe requests, a functionality we disable anyway
because it doesn't fit with the mac80211/hostapd programming
model. Therefore, it isn't useful to program the SSID into
device.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Now the essid stuff is unused, so remove it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When an undirected scan is requested and iwlwifi is not associated but
the user has set an SSID (and maybe was associated with that network at
some point) then iwlwifi will assume the user wanted to scan for this
SSID which seems wrong. Remove this code.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Was wondering about this code since supposedly the firmware will
add the SSID element. Turns out it's dead, so remove it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When I added .set_frag_threshold I didn't realise it was already
there which now generated a sparse warning. Therefore, remove
the .set_frag_threshold NULL initialiser, and while at it all the
other useless ones.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This is a constant from the 802.11 specification.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The patch prints reason code for deauth/dissoc frames to give users
more ideas what's happened for the disconnection.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/p54/p54common.c: In function ‘p54_tx’:
drivers/net/wireless/p54/p54common.c:1058: warning: ‘tim_len’ may be used uninitialized in this function
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch finally adds all necessary code to test Ad-hoc & AP mode with p54.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

stlc45xx's specs finally brought some light what all the 4 extra queues for.
now CAB data and managment frames have their own queue.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch ports more useful features to p54
  - PDR definitions for the synth chips & regulatory domain.
  - honour IEEE80211_TX_CTL_ASSIGN_SEQ flag, if it's set.
  - adds some lost mutex_lock & mutex_unlock.
  - replace two more "magic values" that sneaked past.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Johannes thought it would have been a good idea to change the firmware names.

Note: we still have fallbacks in case our users don't want to "break their running system",
but we won't advertise them with MODULE_FIRMWARE.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

We have some reasons to kill netdev->priv:
1. netdev->priv is equal to netdev_priv().
2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously
   netdev_priv() is more flexible than netdev->priv.
But we cann't kill netdev->priv, because so many drivers reference to it
directly.

OK, becasue Dave S. Miller said, "every direct netdev->priv usage is a bug",
and I want to kill netdev->priv later, I decided to convert all the direct
reference of netdev->priv first.

Different to readonly reference of netdev->priv, in this driver, netdev->priv
was changed. I use netdev->ml_priv to replace netdev->priv.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The classifier should cover the most common use case and will work
without any special configuration.

The principle of the classifier is to directly access the
task_struct via get_current(). In order for this to work,
classification requests from softirqs must be ignored. This is
not a problem because the vast majority of packets in softirq
context are not assigned to a task anyway. For this to work, a
mechanism is needed to trace softirq context. 

This repost goes back to the method of relying on the number of
nested bh disable calls for the sake of not adding too much
complexity and the option to come up with something more reliable
if actually needed.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

I was recently hunting a bug that occurred in network namespace
cleanup.  In looking at the code it became apparrent that we have
and will continue to have cases where if we have anything going
on in a network namespace there will be assumptions that the
loopback device is present.   Things like sending igmp unsubscribe
messages when we bring down network devices invokes the routing
code which assumes that at least the loopback driver is present.

Therefore to avoid magic initcall ordering hackery that is hard
to follow and hard to get right insert a call to register the
loopback device directly from net_dev_init().    This guarantes
that the loopback device is the first device registered and
the last network device to go away.

But do it carefully so we register the loopback device after
we clear dev_boot_phase.
Signed-off-by: Eric W. Biederman <ebiederm@maxwell.aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to setup the network namespace state before we register
the notifier.  Otherwise if a network device is already registered
we get a nasty NULL pointer dereference.
Signed-off-by: Eric W. Biederman <ebiederm@maxwell.aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit ae33bc40.

Write interrupt ack bit in fjn_interrupt for lan and modem to work
simultaneously.
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

net/phonet/af_phonet.c:38:36: error: marked inline, but without a definition
net/phonet/pep-gprs.c:63:10: warning: incorrect type in return expression (different base types)
net/phonet/pep-gprs.c:63:10:    expected int
net/phonet/pep-gprs.c:63:10:    got restricted __be16 [usertype] <noident>
net/phonet/pep-gprs.c:65:10: warning: incorrect type in return expression (different base types)
net/phonet/pep-gprs.c:65:10:    expected int
net/phonet/pep-gprs.c:65:10:    got restricted __be16 [usertype] <noident>
net/phonet/pep-gprs.c:124:16: warning: incorrect type in assignment (different base types)
net/phonet/pep-gprs.c:124:16:    expected restricted __be16 [usertype] protocol
net/phonet/pep-gprs.c:124:16:    got unsigned short [unsigned] [usertype] protocol
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed by sparse:
net/netfilter/ipvs/ip_vs_proto_tcp.c:195:6: warning: incorrect type in argument 5 (different base types)
net/netfilter/ipvs/ip_vs_proto_tcp.c:195:6:    expected restricted __be16 [usertype] oldlen
net/netfilter/ipvs/ip_vs_proto_tcp.c:195:6:    got restricted __be32 [usertype] <noident>
net/netfilter/ipvs/ip_vs_proto_tcp.c:196:6: warning: incorrect type in argument 6 (different base types)
net/netfilter/ipvs/ip_vs_proto_tcp.c:196:6:    expected restricted __be16 [usertype] newlen
net/netfilter/ipvs/ip_vs_proto_tcp.c:196:6:    got restricted __be32 [usertype] <noident>
net/netfilter/ipvs/ip_vs_proto_tcp.c:270:6: warning: incorrect type in argument 5 (different base types)
net/netfilter/ipvs/ip_vs_proto_tcp.c:270:6:    expected restricted __be16 [usertype] oldlen
net/netfilter/ipvs/ip_vs_proto_tcp.c:270:6:    got restricted __be32 [usertype] <noident>
net/netfilter/ipvs/ip_vs_proto_tcp.c:271:6: warning: incorrect type in argument 6 (different base types)
net/netfilter/ipvs/ip_vs_proto_tcp.c:271:6:    expected restricted __be16 [usertype] newlen
net/netfilter/ipvs/ip_vs_proto_tcp.c:271:6:    got restricted __be32 [usertype] <noident>
net/netfilter/ipvs/ip_vs_proto_udp.c:206:6: warning: incorrect type in argument 5 (different base types)
net/netfilter/ipvs/ip_vs_proto_udp.c:206:6:    expected restricted __be16 [usertype] oldlen
net/netfilter/ipvs/ip_vs_proto_udp.c:206:6:    got restricted __be32 [usertype] <noident>
net/netfilter/ipvs/ip_vs_proto_udp.c:207:6: warning: incorrect type in argument 6 (different base types)
net/netfilter/ipvs/ip_vs_proto_udp.c:207:6:    expected restricted __be16 [usertype] newlen
net/netfilter/ipvs/ip_vs_proto_udp.c:207:6:    got restricted __be32 [usertype] <noident>
net/netfilter/ipvs/ip_vs_proto_udp.c:282:6: warning: incorrect type in argument 5 (different base types)
net/netfilter/ipvs/ip_vs_proto_udp.c:282:6:    expected restricted __be16 [usertype] oldlen
net/netfilter/ipvs/ip_vs_proto_udp.c:282:6:    got restricted __be32 [usertype] <noident>
net/netfilter/ipvs/ip_vs_proto_udp.c:283:6: warning: incorrect type in argument 6 (different base types)
net/netfilter/ipvs/ip_vs_proto_udp.c:283:6:    expected restricted __be16 [usertype] newlen
net/netfilter/ipvs/ip_vs_proto_udp.c:283:6:    got restricted __be32 [usertype] <noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's called from __init code only. And__devinit in generic networking code
is pretty strange :^)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:

	drivers/net/wireless/ath5k/base.c
	net/8021q/vlan_core.c

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: Fix recursive descent in __scm_destroy().
  iwl3945: fix deadlock on suspend
  iwl3945: do not send scan command if channel count zero
  iwl3945: clear scanning bits upon failure
  ath5k: correct handling of rx status fields
  zd1211rw: Add 2 device IDs
  Fix logic error in rfkill_check_duplicity
  iwlagn: avoid sleep in softirq context
  iwlwifi: clear scanning bits upon failure
  Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode"
  tcp: Fix recvmsg MSG_PEEK influence of blocking behavior.
  netfilter: netns ct: walk netns list under RTNL
  ipv6: fix run pending DAD when interface becomes ready
  net/9p: fix printk format warnings
  net: fix packet socket delivery in rx irq handler
  xfrm: Have af-specific init_tempsel() initialize family field of temporary selector

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "x86: default to reboot via ACPI"
  x86: align DirectMap in /proc/meminfo
  AMD IOMMU: fix lazy IO/TLB flushing in unmap path
  x86: add smp_mb() before sending INVALIDATE_TLB_VECTOR
  x86: remove VISWS and PARAVIRT around NR_IRQS puzzle
  x86: mention ACPI in top-level Kconfig menu
  x86: size NR_IRQS on 32-bit systems the same way as 64-bit
  x86: don't allow nr_irqs > NR_IRQS
  x86/docs: remove noirqbalance param docs
  x86: don't use tsc_khz to calculate lpj if notsc is passed
  x86, voyager: fix smp_intr_init() compile breakage
  AMD IOMMU: fix detection of NP capable IOMMUs

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] xsc3: fix xsc3_l2_inv_range
  [ARM] mm: fix page table initialization
  [ARM] fix naming of MODULE_START / MODULE_END
  ARM: OMAP: Fix define for twl4030 irqs
  ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bits
  ARM: OMAP: Fix debugfs_create_*'s error checking method for arm/plat-omap
  ARM: OMAP: Fix compiler warnings in gpmc.c
  [ARM] fix VFP+softfloat binaries

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: dv1394: fix possible deadlock in multithreaded clients
  ieee1394: raw1394: fix possible deadlock in multithreaded clients
  ieee1394: struct device - replace bus_id with dev_name(), dev_set_name()
  firewire: struct device - replace bus_id with dev_name(), dev_set_name()

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Block: use round_jiffies_up()
  Add round_jiffies_up and related routines
  block: fix __blkdev_get() for removable devices
  generic-ipi: fix the smp_mb() placement
  blk: move blk_delete_timer call in end_that_request_last
  block: add timer on blkdev_dequeue_request() not elv_next_request()
  bio: define __BIOVEC_PHYS_MERGEABLE
  block: remove unused ll_new_mergeable()

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processors
  [WATCHDOG] SAM9 watchdog - update for moved headers

* 'for-linus' of git://neil.brown.name/md:
  md: linear: Fix a division by zero bug for very small arrays.
  md: fix bug in raid10 recovery.
  md: revert the recent addition of a call to the BLKRRPART ioctl.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix "unused variable" warning in pci_dlpar.c
  powerpc/cell: Fix compile error in ras.c
  powerpc/ps3: Fix compile error in ps3-lpm.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  net/9p: fix printk format warnings
  unsigned fid->fid cannot be negative
  9p: rdma: remove duplicated #include
  p9: Fix leak of waitqueue in request allocation path
  9p: Remove unneeded free of fcall for Flush
  9p: Make all client spin locks IRQ safe
  9p: rdma: Set trans prior to requesting async connection ops