- 17 Apr, 2008 35 commits
-
-
Felix Beck authored
Comments, which suggested to be kernel-doc but were not in the right formatting, have been corrected. Additionally some minor cleanup in the comments has been done. Signed-off-by:
Felix Beck <felix.beck@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com>
-
Heiko Carstens authored
The current uaccess page table walk code assumes at a few places that any access is a user space access. This is not correct if somebody has issued a set_fs(KERNEL_DS) in advance. Add code which checks which address space we are in and with this make sure we access the correct address space. This way we get also rid of the dirty if (!currrent-mm) return -EFAULT; hack in futex_atomic_cmpxchg_pt. Signed-off-by:
-
Heiko Carstens authored
Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by:
-
Heiko Carstens authored
This way we get rid of s390's NO_IDLE_HZ and use the generic dynticks variant instead. In addition we get high resolution timers for free. Signed-off-by:
-
Russell King authored
> Generic code is not supposed to include irq.h. Replace this include > by linux/hardirq.h instead and add/replace an include of linux/irq.h > in asm header files where necessary. > This change should only matter for architectures that make use of > GENERIC_CLOCKEVENTS. > Architectures in question are mips, x86, arm, sh, powerpc, uml and sparc64. > > I did some cross compile tests for mips, x86_64, arm, powerpc and sparc64. > This patch fixes also build breakages caused by the include replacement in > tick-common.h. I generally dislike adding optional linux/* includes in asm/* includes - I'm nervous about this causing include loops. However, there's a separate point to be discussed here. That is, what interfaces are expected of every architecture in the kernel. If generic code wants to be able to set the affinity of interrupts, then that needs to become part of the interfaces listed in linux/interrupt.h rather than linux/irq.h. So what I suggest is this approach instead (against Linus' tree of a couple of days ago) - we move irq_set_affinity() and irq_can_set_affinity() to linux/interrupt.h, change the linux/irq.h includes to linux/interrupt.h and include asm/irq_regs.h where needed (asm/irq_regs.h is supposed to be rarely used include since not much touches the stacked parent context registers.) Build tested on ARM PXA family kernels and ARM's Realview platform kernels which both use genirq. [ tglx@linutronix.de: add GENERIC_HARDIRQ dependencies ] Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Heiko Carstens authored
Remove the program check generating monitor calls and use function calls instead. Theres is no real advantage in using monitor calls, but they do make debugging harder, because of all the program checks it generates. Signed-off-by:
-
Ursula Braun authored
Next generation of OSA adapters allows retrieval of further self-describing infos. This is the preparational infrastructure patch for further exploitation in the qeth driver. Signed-off-by:
Ursula Braun <braunu@de.ibm.com> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Johannes Weiner authored
Signed-off-by:
Johannes Weiner <hannes@saeurebad.de> Signed-off-by:
-
Ursula Braun authored
Signed-off-by:
-
Michael Holzheu authored
The new function supports setting of permissions for the debugfs files created by the debug feature. In addition to that, the function provides uid and gid as parameters for future use. Currently only root is allowed for uid and gid. Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Not very helpful when code dies in "init". See also http://lkml.org/lkml/2008/3/26/557 . Signed-off-by:
-
Jan Glauber authored
Add get_clock_xt to read an 8 byte clock value using store clock extended (STCKE) and use get_clock_xt for sched_clock. STCKE should be faster than STCK on newer machines. Signed-off-by:
Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by:
-
Ralph Wuerthner authored
This patch allows user space applications to access large amounts of truly random data. The random data source is the build-in hardware random number generator on the CEX2C cards. Signed-off-by:
Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by:
-
Ralph Wuerthner authored
The api for hardware random number generators is currently limited to devices that never fail. If the hardware is registered as a source for random numbers it has to work. This prevents the use of i/o based random number devices where the i/o might fail. Add a check for errors after the read from a hardware random number device. This patch is required to support large random numbers retrieved from the CEX2C cards on System z. Signed-off-by:
-
Heiko Carstens authored
If vertical cpu polarization is active then the hypervisor will dispatch certain cpus for a longer time than other cpus for maximum performance. For example if a guest would have three virtual cpus, each of them with a share of 33 percent, then in case of vertical cpu polarization all of the processing time would be combined to a single cpu which would run all the time, while the other two cpus would get nearly no cpu time. There are three different types of vertical cpus: high, medium and low. Low cpus hardly get any real cpu time, while high cpus get a full real cpu. Medium cpus get something in between. In order to switch between the two possible modes (default is horizontal) a 0 for horizontal polarization or a 1 for vertical polarization must be written to the dispatching sysfs attribute: /sys/devices/system/cpu/dispatching The polarization of each single cpu can be figured out by the polarization sysfs attribute of each cpu: /sys/devices/system/cpu/cpuX/polarization horizontal, vertical:high, vertical:medium, vertical:low or unknown. When switching polarization the polarization attribute may contain the value unknown until the configuration change is done and the kernel has figured out the new polarization of each cpu. Note that running a system with different types of vertical cpus may result in significant performance regressions. If possible only one type of vertical cpus should be used. All other cpus should be offlined. Signed-off-by:
-
Heiko Carstens authored
Add s390 backend so we can give the scheduler some hints about the cpu topology. Signed-off-by:
-
Heiko Carstens authored
Make stfle visible so other code can call this. Signed-off-by:
-
Martin Schwidefsky authored
Add permanent and temporary model capacity and the corresponding capacity value fields for the three capacity identifiers to the output of /proc/sysinfo. Signed-off-by:
-
Christian Borntraeger authored
drivers/s390/sysinfo.c uses the store system information intruction to query the system about information of the machine, the LPAR and additional hypervisors. KVM has to implement the host part for this instruction. To avoid code duplication, this patch splits the common definitions from sysinfo.c into a separate header file include/asm-s390/sysinfo.h for KVM use. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
Now the system reports system information messages (SIM) to the user. The System Reference Code (SRC) which is reported to the user gives the abbility to lookup the reason of the SIM online in the documentation of the storage server. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
sys_sigreturn and sys_rt_sigreturn don't take any arguments. So luckily this resulted only in unneeded instead of incorrect code. But still this clearly shows why one should not put extern declarations in C files (will be fixed with a larger sparse patch). Signed-off-by:
-
Frank Munzert authored
If user space opens a unit record device node then vmur is leaving the kernel with lock open_mutex still held to prevent other processes from opening the device simultaneously. This causes lockdep to complain about a lock held when returning to user space. Now the mutex is replaced by a wait queue to serialize device open. Signed-off-by:
Frank Munzert <munzert@de.ibm.com> Signed-off-by:
-
Michael Holzheu authored
When a tape device is set online, offline and online again, the following error message is printed on the console: "sysfs: duplicate filename 'non-rewinding' can not be created". The reason is that when setting a device online, the tape driver creates a sysfs symlink from the tape device to the tape class device. Unfortunately the symlink is not removed correctly, when the device is set offline. Instead of passing the tape device object to sysfs_remove_link, the class device object is used. This patch fixes this problem and uses the correct tape device object now. Signed-off-by:
-
Stefan Haberland authored
allocating dasd_fba_private without GFP_DMA results in IO error during read device characteristics of a FBA disk Signed-off-by:
-
Ursula Braun authored
Problem: Usually every FCP device has its own indicator field the adapter uses to signal outstanding work. Once a certain limit of devices is reached, a common indicator field is used. In certain scenarios qdio resets this common indicator field, but handles only part of the FCP-devices sharing the common indicator field. Thus inbound traffic on the non-processed shared FCP-devices is not recognized immediately. Solution: Make sure common indicator field is reset only, if all FCP-devices sharing the indicator are processed. Signed-off-by:
-
Heiko Carstens authored
Reintroduces in_interrupt() check in sclp_tty code. Add may_schedule parameter to vt220 write function, so we can let the write function know if it may schedule or not. So we disallow scheduling for all console calls and may allow them for tty calls. Signed-off-by:
-
Michael Ernst authored
It is now possible to trigger cm_enable processing several times in parallel without causing a kernel panic. Signed-off-by:
Michael Ernst <mernst@de.ibm.com> Signed-off-by:
-
Cornelia Huck authored
Currently, we don't do much on no path or no device situations during normal user I/O, since we rely on reports regarding those events by the machine. If we trigger a path verification to bring our device state up-to-date, we (a) may recover from path failures earlier and (b) better handle situations where the hardware/hypervisor doesn't give us enough notifications. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Cornelia Huck authored
Make sure we wait for previous evaluations triggered by path state changes to have settled before we manipulate path states again. Signed-off-by:
-
Martin Schwidefsky authored
Fix the following link error with allnoconfig: vmem.c:(.text+0x175c): undefined reference to `smp_ptlb_all' vmem.c:(.text+0x1b24): undefined reference to `smp_ptlb_all' fork.c:(.text+0x4190): undefined reference to `smp_ptlb_all' : undefined reference to `smp_ptlb_all' : undefined reference to `smp_ptlb_all' mm/built-in.o:: more undefined references to `smp_ptlb_all' follow make[1]: *** [.tmp_vmlinux1] Error 1 make: *** [sub-make] Error 2 Signed-off-by:
-
Heiko Carstens authored
This is just a port of 83bd0102 "x86: protect against sigaltstack wraparound". Signed-off-by:
-
Josef 'Jeff' Sipek authored
I compiled the kernel without deadline, and the dasd code exits the old scheduler (CFQ), fails to load the new one (deadline), and then things just hang - with one of these (sorry about the weird chars - I copy & pasted it from a 3270 console): dasd(eckd): 0.0.0151: 3390/0A(CU:3990/01) Cyl:3338 Head:15 Sec:224 ------------ cut here ------------ Badness at kernel/mutex.c:134 Modules linked in: dasd_eckd_mod dasd_mod CPU: 0 Not tainted 2.6.25-rc3 #9 Process exe (pid: 538, task: 000000000d172000, ksp: 000000000d21ef88) Krnl PSW : 0404000180000000 000000000022fb5c (mutex_lock_nested+0x2a4/0x2cc) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000024218 000000000076fc78 0000000000000000 000000000000000f 000000000022f92e 0000000000449898 000000000f921c00 000003e000162590 00000000001539c4 000000000d172000 070000007fffffff 000000000d21f400 000000000f8f2560 00000000002413f8 000000000022fb44 000000000d21f400 Krnl Code: 000000000022fb50: bf2f1000 icm %r2,15,0(%r1) 000000000022fb54: a774fef6 brc 7,22f940 000000000022fb58: a7f40001 brc 15,22fb5a >000000000022fb5c: a7f4fef2 brc 15,22f940 000000000022fb60: c0e5fffa112a brasl %r14,171db4 000000000022fb66: 1222 ltr %r2,%r2 000000000022fb68: a784fedb brc 8,22f91e 000000000022fb6c: c010002a0086 larl %r1,76fc78 Call Trace: (<000000000022f92e> mutex_lock_nested+0x76/0x2cc) <00000000001539c4> elevator_exit+0x38/0x80 <0000000000156ffe> blk_cleanup_queue+0x62/0x7c <000003e0001d5414> dasd_change_state+0xe0/0x8ec <000003e0001d5cae> dasd_set_target_state+0x8e/0x9c <000003e0001d5f74> dasd_generic_set_online+0x160/0x284 <000003e00011e83a> dasd_eckd_set_online+0x2e/0x40 <0000000000199bf4> ccw_device_set_online+0x170/0x2c0 <0000000000199d9e> online_store_recog_and_online+0x5a/0x14c <000000000019a08a> online_store+0xbe/0x2ec <000000000018456c> dev_attr_store+0x38/0x58 <000000000010efbc> sysfs_write_file+0x130/0x190 <00000000000af582> vfs_write+0xb2/0x160 <00000000000afc7c> sys_write+0x54/0x9c <0000000000025e16> sys32_write+0x2e/0x50 <0000000000024218> sysc_noemu+0x10/0x16 <0000000077e82bd2> 0x77e82bd2 Set elevator pointer to NULL in order to avoid double elevator_exit calls when elevator_init call for deadline iosched fails. Also make sure the dasd device driver depends on IOSCHED_DEADLINE so the default IO scheduler of the dasd driver is present. Signed-off-by:Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: it821x: do not describe noraid parameter with its value Pb1200/DBAu1200: fix bad IDE resource size Au1200: IDE driver build fix Au1200: kill IDE driver function prototypes avr32 mustn't select HAVE_IDE
-
- 16 Apr, 2008 5 commits
-
-
Paul Bolle authored
Describe noraid parameter with its name (and not its value). Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Sergei Shtylyov authored
The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Sergei Shtylyov authored
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled: drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable': drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function `sg_virt' drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function `sg_next' drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from integer without a cast Fix this by including <linux/scatterlist.h>. While at it, remove the #include's without which the driver happily builds. Signed-off-by:
-
Sergei Shtylyov authored
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared `static' but never defined include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared `static' but never defined by wiping out the whole "function prototyping" section from the header file <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are already dead in the IDE driver; move the only useful prototype into the driver. Signed-off-by:
-
Adrian Bunk authored
There's a libata based PATA driver for avr32, but no support for drivers/ide/ on avr32. This patch fixes the following compile error: <-- snip --> ... CC [M] drivers/ide/ide-cd.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory make[3]: *** [drivers/ide/ide-cd.o] Error 1 <-- snip --> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
