- 27 Aug, 2008 31 commits
-
-
Jiri Slaby authored
There were 2 omitted readb's used on an iomap space. eliminate them by using ioread8 instead. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Frank Blaschka authored
When a preallocated header qdio buffer is filled we have to account the offset for the data length. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Frank Blaschka authored
In case the netdev unicast list contains additional entries we have to register/deregister them. Signed-off-by:
-
Ursula Braun authored
return value -ENOTSUPP is not valid in userspace context, use -EOPNOTSUPP instead. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
We must not call dev_mc_add() from within our HW configure which happens before we initialize and register the netdev. Do it in open() instead. Thanks to Sebastian Siewior for tracking it down. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Sebastian Siewior authored
I got the following backtrace while network was unavailble: |NETDEV WATCHDOG: eth0: transmit timed out |BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87 |in_atomic():1, irqs_disabled():0 |Call Trace: |[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable) |[c0383db0] [c001e938] __might_sleep+0xe0/0xf4 |[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c |[c0383de0] [c019005c] phy_stop+0x20/0x70 |[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4 |[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60 |[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144 |[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8 |[c0383e60] [c002b084] __do_softirq+0x5c/0xc4 |[c0383e80] [c00046fc] do_softirq+0x3c/0x54 |[c0383e90] [c002ac60] irq_exit+0x3c/0x5c |[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8 |[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18 |[c0383f80] [c000804c] cpu_idle+0xcc/0xdc |[c0383fa0] [c025c07c] etext+0x7c/0x90 |[c0383fc0] [c0338960] start_kernel+0x294/0x2a8 |[c0383ff0] [c00003dc] skpinv+0x304/0x340 |------------[ cut here ]------------ The phylock was once a spinlock but got changed into a mutex via commit 35b5f6b1 aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping] Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Ayaz Abdulla authored
Fix the checksum feature advertised in device flags. The hardware support TCP/UDP over IPv4 and TCP/UDP over IPv6 (without IPv6 extension headers). However, the kernel feature flags do not distinguish IPv6 with/without extension headers. Therefore, the driver needs to use NETIF_F_IP_CSUM instead of NETIF_F_HW_CSUM since the latter includes all IPv6 packets. A future patch can be created to check for extension headers and perform software checksum calculation. Signed-off-by:
Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Manfred Spraul <manfred@colorfullife.com Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Oliver Martin authored
Implement set_mac_address for mcs7830. This enables me to use it with my cable modem. Signed-off-by:
Oliver Martin <oliver.martin@student.tuwien.ac.at> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
This adds USB device IDs for MosChip 7730 and Sitecom LN030 to the mcs7830 driver. The IDs have been reported to work without further modifications. Signed-off-by:
David Brownell <david-b@pacbell.net> Cc: Viktor Horvath <ViktorHorvath@gmx.net> Cc: Robbert Wethmar <robbert@wethmar.nl> Cc: Bart van der Klip <bklip@xs4all.nl> Signed-off-by:
-
Jeff Garzik authored
Properly handle resource cleanup on unplug/exit. Spotted by Jonathan Cameron Signed-off-by: -
Santiago Leon authored
This patch fixes a ibmveth bug where bad UDP checksums are being transmitted when checksum offloading is enabled. The hypervisor does checksum offloading only on TCP packets, so ibmveth calls skb_checksum_help() for any other protocol. The bug happens because the packet is being modified after the DMA map, so we would need a memory barrier before making the hypervisor call. Reordering the code so that the DMA map happens after skb_checksum_help() has the additional advantage of fixing a DMA map leak if skb_checksum_help() where to fail. Signed-off-by:
Santiago Leon <santil@us.ibm.com> Signed-off-by:
-
Denis Joseph Barrow authored
Fixes dev_kfree_skb happening too many times when hso_start_net_device is called from hso_resume. Signed-off-by:
Denis Joseph Barrow <D.Barow@option.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Denis Joseph Barrow authored
Fixes Icon-322 detection. Signed-off-by:
-
Jay Cliburn authored
The atl1 driver is causing stalled connections and file corruption whenever TSO is enabled. Two examples are here: http://lkml.org/lkml/2008/7/15/325 http://lkml.org/lkml/2008/8/18/543 Disable TSO by default until we can determine the source of the problem. Signed-off-by:
Jay Cliburn <jacliburn@bellsouth.net> cc: stable@kernel.org Signed-off-by:
-
Ilpo Järvinen authored
Doesn't cause problems (yet) because err gets zeroed earlier. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Alexander Duyck authored
Disable support for device 8086:10E8. Currently the result of loading the driver with the device present causes system instability. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Takashi Iwai authored
CC [M] drivers/net/skfp/ess.o drivers/net/skfp/ess.c: In function 'ess_send_response': drivers/net/skfp/ess.c:513: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c: In function 'ess_send_alc_req': drivers/net/skfp/ess.c:609: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c:639: warning: cast from pointer to integer of different size Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Klaus-D. Wacker authored
LCS recovery dumps in irq routine when CCW address in Subchannel Status Word (SCSW) is zero. This occurs when recovery is driven after cable reconnect. Signed-off-by:
Klaus-D. Wacker <kdwacker@de.ibm.com> Signed-off-by:
-
Peter Tiedemann authored
Use netdev->ml_priv instead of netdev->priv Signed-off-by:
Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by:
-
Peter Tiedemann authored
Use netdev->ml_priv instead of netdev->priv Signed-off-by:
-
Martin Schwidefsky authored
probe_error() frees memory only, if cgdev->dev.driver_data refers to the claw_privbk structure. Move forward its setting in claw_probe() to ensure proper freeing of claw_privbk allocations. Cc: Daniel <danielm77@spray.se> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan 'pass the paper bags' Cox <alan@redhat.com> Signed-off-by:
-
Heiko Schocher authored
Signed-off-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Alexander Duyck authored
The real_num_tx_queues was not being set when in MSI-X only mode. This patch corrects that path so all interrupt types are correctly configured. Signed-off-by:
-
Alexander Duyck authored
Ethtool -d is reading the EICR and ICR registers which is currently clearing these registers and masking off interrupts. To prevent this we read the EICS and ICS equivilents as they can be read without clearing or masking. Signed-off-by:
-
Alexander Duyck authored
Set the EICS bit for each of the RX queues at least once every 2 seconds to prevent the rx queues from stalling. Signed-off-by:
-
Francois Romieu authored
The leak hurts with swiotlb and jumbo frames. Fix http://bugzilla.kernel.org/show_bug.cgi?id=9468. Heavily hinted by Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Tested-by:
Alistair John Strachan <alistair@devzero.co.uk> Tested-by:
Timothy J Fontaine <tjfontaine@atxconsulting.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by:
-
Brice Goglin authored
Update myri10ge version string to 1.4.3-1.358. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Alexander Duyck authored
VLAN filtering is broken, due to reading the incorrect register for the VLAN filtering settings. Fixed by reading/writing the correct register. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Mike Frysinger authored
so update things accordingly Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
-
- 25 Aug, 2008 9 commits
-
-
Eilon Greenstein authored
Version update Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yitchak Gertner authored
The multi queue support is still disabled by default for the bnx2x (needs some more testing and validation), but there are 2 obvious bug in it which are fixed in this patch Signed-off-by:
Yitchak Gertner <gertner@broadcom.com> Signed-off-by:
-
Yitchak Gertner authored
Fixing the order of enabling and disabling NAPI and the interrupts Signed-off-by:
-
Yitchak Gertner authored
Load failures were not handled correctly Signed-off-by:
-
Yitchak Gertner authored
The TPA initialization is part of the FW internal memory initialization and so it is moved to the appropriate function Signed-off-by:
-
Eilon Greenstein authored
Increasing the lock timeout to 5 seconds instead of 1 second to minimize the chance of failures due to timeout Signed-off-by:
-
Eilon Greenstein authored
After iSCSI boot, the HW lock should only protect the flag so only the first function will reset the chip and not then entire chip reset process Signed-off-by:
-
Eilon Greenstein authored
The A1021G board is also using the fan failure mechanism in the same way the A1022G board does Signed-off-by:
-
Eilon Greenstein authored
The has Rx work check was wrong: when the FW was at the end of the page, the driver was already at the beginning of the next page. Since the check only validated that both driver and FW are pointing to the same place, it concluded that there is still work to be done. This caused some serious issues including long latency results on ping-pong test and lockups while unloading the driver in that condition. Signed-off-by:
-
