- 30 Mar, 2009 40 commits
-
-
Trent Piepho authored
Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Trent Piepho authored
The card data for BTTV_BOARD_IVC120 set muxsel to a bunch of bogus values (1 to 16), which the common mux code would use to set the Bt878's mux to some random value. Then the custom code in ivc120_muxsel() would change the Bt878's mux to the right value (always MUX0). Better to just make the muxsel data correct (all zeros, easy!) and get the mux right to begin with. Then the extra Bt878 mux setting code in ivc120_muxsel() can be eliminated (the rest of the code for the IVC-120G's external mux is still there of course). This will help me clean up muxsel for some other changes. It should also get rid of an unnecessary mux switch when changing from certain inputs to certain other inputs on the IVC-120G. Cc: Alan Garfield <alan@fromorbit.com> Signed-off-by:
-
Trent Piepho authored
The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by:
-
Trent Piepho authored
The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d73 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by:
-
Trent Piepho authored
The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by:
-
Trent Piepho authored
The code to set the norm for the TDA9880 analog demod was comparing btv->norm, an index into the bttv driver's norm array, to V4L2_STD_NTSC, which is a bit flag that's part of the V4L2 API. This doesn't work of course and results in the PAL path always being taken. What's more, it modified the bttv_tvcards[] entries for cards using the TDA9880. This is wrong because changing the norm on one card will also affect other cards of the same type. Writing to bttv_tvcards is also bad because it should be read-only or even devinitdata. Changing the norm would also cause the audio to become unmuted. Have the code get called for both norm setting and audio input setting (which where the gpios are set) to avoid needed to modify bttv_tvcards. Signed-off-by:
-
Trent Piepho authored
The norm value in the driver is an index into an array and the the driver doesn't allow it to be negative or otherwise invalid. It should be unsigned but wasn't in all places. Fix some structs and functions to have the norm be unsigned. Get rid of useless checks for "< 0". Most of the driver code can't handle a norm value that's out of range, so change some ">= BTTV_TVNORMS" checks to BUG_ON(). There's no point in silently ignoring invalid driver state just to crash because of it later. Reported-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Douglas Schilling Landgraf authored
Added board Pinnacle Dazzle Video Creator Plus DVC107 to name description field. Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Nicola Soranzo authored
Coding style fixes for recent changesets in em28xx. Signed-off-by:
Nicola Soranzo <nsoranzo@tiscali.it> Signed-off-by:
-
Hans Verkuil authored
Control arrays as are used with v4l2_ctrl_next must be sorted from low to high. Add a comment at the top of all such arrays to warn about this. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
In order to convert the v4l1 zoran and vino i2c drivers to v4l2 these extra ops are required. Signed-off-by:
-
Hans Verkuil authored
The cx2341x_mpeg_ctrls array must be ordered by control ID. I know that this is bad design, but for now I will just fix this bug and revisit it when all drivers have moved to v4l2_device/v4l2_subdev, since that will allow me to do greatly improve control handling. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Tobias Lorenz authored
LED_REPORT and all flash REPORTs are on it's way. This code rearrangement cleans up the code for proper integration later on. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Tobias Lorenz authored
- "DealExtreme" sells the "PCear" radio and that comes from "Sanei Electric". - MPlayer is also usable as radio application. - Consistent usage of tabulators and blanks in the code. Signed-off-by:
-
Indika Katugampala authored
[dougsland@redhat.com: Fixed CodingStyle] Signed-off-by:
Indika Katugampala <indika_20012001@yahoo.co.jp> Signed-off-by:
-
Nicola Soranzo authored
Lots of coding style fixes and a typo correction for em28xx. [dougsland@redhat.com: fixed a reject due to a change on em28xx-audio.c] Signed-off-by:
-
Douglas Schilling Landgraf authored
Added DVC 101 model to Pinnacle Dazzle description Signed-off-by:
-
Douglas Schilling Landgraf authored
Added macros EM28XX_START_AUDIO and EM28XX_STOP_AUDIO for em28xx_cmd(). Signed-off-by:
-
Alexey Klimov authored
Patch removes printk and place em28xx_errdev macros to provide information about driver name to dmesg. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Douglas Schilling Landgraf authored
Added lock for users count Signed-off-by:
-
Douglas Schilling Landgraf authored
Added spinlock for trigger session Signed-off-by:
-
Robert Krakora authored
Essentially if a snd_em28xx_capture_trigger() stop followed by a snd_em28xx_capture_trigger() start would not yield any data because there was some logic put in with an adev->shutdown variable which did not seem warranted in my humble opinion. It would cause snd_em28xx_capture_trigger start never to start up the audio stream until the device was closed and reopened again. Upon re-opening the device adev->shutdown is reset and audio data would again flow. Signed-off-by:
Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by:
-
Robert Krakora authored
Fix for em28xx memory leak and function rename Signed-off-by:
-
Douglas Schilling Landgraf authored
Removed bad check. Thanks to Robert Krakora <rob.krakora@messagenetsystems.com> to report that. Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Signed-off-by: -
Mauro Carvalho Chehab authored
Kaiomy entry. Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Signed-off-by: -
Mauro Carvalho Chehab authored
For i2c normal work, we need to slow down the bus speed. However, the slow down breaks the eeprom firmware load. So, use normal speed for eeprom booting and then restore the i2c speed after that. It should also be noticed that no other I2C transfer should be in course while booting from eeprom, otherwise, tda10046 goes into an instable state. So, proper locking are needed at the i2c bus master. Tested with saa7134 MSI TV @nyware A/D board, that comes with an eeprom with firmware version 29. Signed-off-by: -
Mauro Carvalho Chehab authored
KBL is not needed on saa7134, so, let's remove it. However, we should take some care to avoid opening the module while initializing it. This issue exists with newer udev's that opens a device as soon as the driver is registered. So, a proper lock is needed on open. Signed-off-by: -
Mauro Carvalho Chehab authored
Fix two broken controls where a step weren't specified. Without a step, userspace apps won't allow to adjust such controls. Signed-off-by: -
Mauro Carvalho Chehab authored
The waitqueue is never used. So, let's just remove it. Signed-off-by: -
Mauro Carvalho Chehab authored
Some saa7134 devices require to open an i2c gate before tuning. This patch fix the initialization for those devices. The nxt200x_gate_ctrl() logic were returned back to the old place, since we don't know how to close the gate. A future pacth could revert that change and provide the proper close gate control, to avoid keeping it open forever. Signed-off-by: -
Mauro Carvalho Chehab authored
On certain devices, before opening a tuner, we need to open the tuner gate via i2c. This patch just moves the tuner probing code to the same place where such i2c commands are handled, to make easier to fix this trouble on later patches. Signed-off-by: -
Mauro Carvalho Chehab authored
While here, be sure that gate will be kept disabled if an error occurs. Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: -
Mauro Carvalho Chehab authored
The gate control logic is broken: several routines just keep it open; other rotines close it properly; there are even other routines that assumes that it is open without really checking or opening it. Instead of having to manually handle the gate control and having such troubles, let a sub-routine take care of the gate, opening it before i2c_transfer and closing it after that. This avoids leaving the gate into a random state. Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: -
Hans Verkuil authored
Doing the v4l2_device registration in the saa7146 core will make it dependent on v4l2, even for DVB-only boards. This registration and unregistration belongs in saa7146_vv instead. Signed-off-by:
-
