- 14 Aug, 2008 19 commits
-
-
Dhananjay Phadke authored
NX3031 does not require driver to kill dma watchdog. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
Re-read link status in dev open(). Schedule link watchdog only if dev is up. Signed-off-by:
-
Dhananjay Phadke authored
Free up rx ring during driver unload or open() failure. Signed-off-by:
-
Dhananjay Phadke authored
For NX3031 mac addr should be read from firmware. mac addr in flash is still valid, but can be overridden by firmware if running in virtualization environment. For old revisions, mac addr is retrieved directly from flash. Signed-off-by:
-
Jesse Brandeburg authored
This is a simple device ID add for adapters that support CX4 (copper infiniband style cable) connectors for 10GbE. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Bruce Allan authored
The removal of this bit of code was missed in an earlier patch submittal. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
-
Bruce Allan authored
Some systems do not like 82571/2 use of 16-bit MSI messages and some other systems claim to support MSI, but neither really works. Setup a test MSI handler to detect whether or not MSI is working properly, and if not, fallback to legacy INTx interrupts. Signed-off-by:
-
Bruce Allan authored
Setting an MTU value below 68 was disabling the network connection and would not reconnect until the driver was reloaded. Prevent changing the MTU to anything below 68. Signed-off-by:
-
Bruce Allan authored
Prevent Tx hangs from happening on 10Mb flood ping by increasing the timeout factor. Signed-off-by:
-
Bruce Allan authored
The e1000e driver was based on a version of e1000 prior to acme's introduction of skb_copy_to_linear_data_offset, and was submitted after acme went through and coverted all the drivers to use it. Signed-off-by:
-
Bruce Allan authored
During module load, seting the InterruptThrottleRate parameter to an invalid value would result in the itr/itr_setting pair being set to unexpected values which would result in poor performance. Signed-off-by:
-
Bruce Allan authored
A number of users have mentioned they have tools that rely on a link-up indication having a return value of 1 rather than a non-zero value. Signed-off-by:
-
Robert Fitzsimons authored
Two regressions were introduced by the recent tlan: 64bit conversion commit (93e16847). The first in TLan_GetSKB caused a NULL pointer dereference. With the second causing the link to fail to come up. Signed-off-by:
Robert Fitzsimons <robfitz@273k.net> Signed-off-by:
-
Rafael J. Wysocki authored
On my test box with the Asus M3A32-MVP main board there is a regression from 2.6.26 related to suspend, hibernation and shutdown. Namely, if Wake-on-LAN is enabled with 'ethtool -s eth0 wol g', the box hangs solid during all of these operations, while executing either sky2_suspend(), or sky2_shutdown(). This patch fixes it for me. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Vegard Nossum authored
The patch was generated using the Coccinelle semantic patch framework. Cc: Julia Lawall <julia@diku.dk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by:
-
Brice Goglin authored
When myri10ge_fw_name is given, use it to override the rss firmware name as well. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Mikael Pettersson authored
The arm ixp4xx_eth driver doesn't compile in 2.6.27-rc1: CC [M] drivers/net/arm/ixp4xx_eth.o drivers/net/arm/ixp4xx_eth.c: In function 'eth_poll': drivers/net/arm/ixp4xx_eth.c:554: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:554: error: too few arguments to function 'dma_mapping_error' drivers/net/arm/ixp4xx_eth.c: In function 'eth_xmit': drivers/net/arm/ixp4xx_eth.c:701: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:701: error: too few arguments to function 'dma_mapping_error' drivers/net/arm/ixp4xx_eth.c: In function 'init_queues': drivers/net/arm/ixp4xx_eth.c:886: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:886: error: too few arguments to function 'dma_mapping_error' make[3]: *** [drivers/net/arm/ixp4xx_eth.o] Error 1 make[2]: *** [drivers/net/arm] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 dma_mapping_error() changed in 2.6.27-rc1 to also take a device parameter, but nobody bothered updating ixp4xx_eth.c. Fixed by passing the appropriate device value in the dma_mapping_error() calls. Tested on an ixp425 box. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Acked-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Scott Wood authored
gfar_halt() was factored out into halting and disabling by commit d87eb127, as the suspend() method only wants to do the former. However, the call to gfar_halt_nodisable() from gfar_halt() apparently got lost during the patch respin process. This adds it back. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Huang Weiyi authored
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/acenic.c drivers/net/bnx2x_link.c drivers/net/bnx2x_main.c drivers/net/cpmac.c drivers/net/gianfar_sysfs.c drivers/net/ipg.h drivers/net/ppp_mppe.c drivers/net/pppol2tp.c drivers/net/r6040.c drivers/net/sh_eth.c drivers/net/sky2.c drivers/net/tehuti.h drivers/net/typhoon.c This patch removes the said #include <linux/version.h>. Signed-off-by:
Huang Weiyi <hwy@cn.fujitsu.com> Signed-off-by:
-
- 13 Aug, 2008 21 commits
-
-
Daniel Lezcano authored
This patch makes the multicast socket to be per namespace. When a network namespace is created, other than the init_net and a multicast packet is received, the kernel goes to a hang or a kernel panic. How to reproduce ? * create a child network namespace * create a pair virtual device veth * ip link add type veth * move one side to the pair network device to the child namespace * ip link set netns <childpid> dev veth1 * ping -I veth0 224.0.0.1 The bug appears because the function ip_mc_init_dev does not initialize the different multicast fields as it exits because it is not the init_net. BUG: soft lockup - CPU#0 stuck for 61s! [avahi-daemon:2695] Modules linked in: irq event stamp: 50350 hardirqs last enabled at (50349): [<c03ee949>] _spin_unlock_irqrestore+0x34/0x39 hardirqs last disabled at (50350): [<c03ec639>] schedule+0x9f/0x5ff softirqs last enabled at (45712): [<c0374d4b>] ip_setsockopt+0x8e7/0x909 softirqs last disabled at (45710): [<c03ee682>] _spin_lock_bh+0x8/0x27 Pid: 2695, comm: avahi-daemon Not tainted (2.6.27-rc2-00029-g0872073 #3) EIP: 0060:[<c03ee47c>] EFLAGS: 00000297 CPU: 0 EIP is at __read_lock_failed+0x8/0x10 EAX: c4f38810 EBX: c4f38810 ECX: 00000000 EDX: c04cc22e ESI: fb0000e0 EDI: 00000011 EBP: 0f02000a ESP: c4e3faa0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 44618a40 CR3: 04e37000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c02311f8>] ? _raw_read_lock+0x23/0x25 [<c0390666>] ? ip_check_mc+0x1c/0x83 [<c036d478>] ? ip_route_input+0x229/0xe92 [<c022e2e4>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c0104c9c>] ? do_IRQ+0x69/0x7d [<c0102e64>] ? restore_nocheck_notrace+0x0/0xe [<c036fdba>] ? ip_rcv+0x227/0x505 [<c0358764>] ? netif_receive_skb+0xfe/0x2b3 [<c03588d2>] ? netif_receive_skb+0x26c/0x2b3 [<c035af31>] ? process_backlog+0x73/0xbd [<c035a8cd>] ? net_rx_action+0xc1/0x1ae [<c01218a8>] ? __do_softirq+0x7b/0xef [<c0121953>] ? do_softirq+0x37/0x4d [<c035b50d>] ? dev_queue_xmit+0x3d4/0x40b [<c0122037>] ? local_bh_enable+0x96/0xab [<c035b50d>] ? dev_queue_xmit+0x3d4/0x40b [<c012181e>] ? _local_bh_enable+0x79/0x88 [<c035fcb8>] ? neigh_resolve_output+0x20f/0x239 [<c0373118>] ? ip_finish_output+0x1df/0x209 [<c0373364>] ? ip_dev_loopback_xmit+0x62/0x66 [<c0371db5>] ? ip_local_out+0x15/0x17 [<c0372013>] ? ip_push_pending_frames+0x25c/0x2bb [<c03891b8>] ? udp_push_pending_frames+0x2bb/0x30e [<c038a189>] ? udp_sendmsg+0x413/0x51d [<c038a1a9>] ? udp_sendmsg+0x433/0x51d [<c038f927>] ? inet_sendmsg+0x35/0x3f [<c034f092>] ? sock_sendmsg+0xb8/0xd1 [<c012d554>] ? autoremove_wake_function+0x0/0x2b [<c022e6de>] ? copy_from_user+0x32/0x5e [<c022e6de>] ? copy_from_user+0x32/0x5e [<c034f238>] ? sys_sendmsg+0x18d/0x1f0 [<c0175e90>] ? pipe_write+0x3cb/0x3d7 [<c0170347>] ? do_sync_write+0xbe/0x105 [<c012d554>] ? autoremove_wake_function+0x0/0x2b [<c03503b2>] ? sys_socketcall+0x176/0x1b0 [<c01085ea>] ? syscall_trace_enter+0x6c/0x7b [<c0102e1a>] ? syscall_call+0x7/0xb Signed-off-by:Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eilon Greenstein authored
Version update Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Checkpatch compliance The latest version of checkpatch found the following style errors in the code Signed-off-by:
-
Eilon Greenstein authored
Spelling mistakes Spelling has to L's in it... Signed-off-by:
-
Eilon Greenstein authored
Minor code improvements Small changes to make the code a little bit more efficient and mostly more readable: - Using unified macros for EMAC_RD/WR which looks like normal REG_RD/WR - Removing the NIG_WR since it did nothing and was only confusing - On bnx2x_panic_dump, print only the used parts of the rings - define parameters only on the branch they are needed and not at the beginning of the function - using NETIF_MSG_INTR and not private BNX2X_MSG_SP for debug prints Signed-off-by:
-
Eilon Greenstein authored
Driver info The internal FW which is downloaded by the driver should not be displayed - it is only causing confusion and it is redundant since it can be concluded from the driver version. Display only FW which is burned on the board nvram Signed-off-by:
-
Eilon Greenstein authored
1G LED does not turn off The 1G LED was not switched to off when the link was lost Signed-off-by:
-
Yaniv Rosner authored
8073 PHY changes The initial support we had for this PHY needs some serious changing. The major change is that this PHY should be initialized only when the first function is loaded and not for each function. The official SPI-ROM of this PHY was released and it requires some changes in the initialization code as well Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Change GPIO for any port The set GPIO function should receive the port index to allow changing the GPIO of another port. This is needed for the common init phase (one the first driver is loaded for the chip) Signed-off-by:
-
Yaniv Rosner authored
Pause settings - 1G pause was not working due to missing write to the emac block (TX_MODE_FLOW_EN) - The flow control should use the negotiated result (after autoneg) so we should save both the requested autoneg and the result - The HW credits with flow control at 1G speed were not optimized and caused low throughput - It is recommended to turn off flow control if the MTU is bigger than 5000B due to internal buffers size Signed-off-by:
-
Yaniv Rosner authored
Link order with external PHY When external PHY exists (second chip with the PHY to translate to another physical medium) the link with the eternal PHY and the network should be established before setting the link between the 5771x and the PHY. This is the right order and it is important when using autoneg - the link to the network should use the autoneg and the link between the two chips should be forced to the network result. Signed-off-by:
-
Vladislav Zolotarov authored
No LRO without Rx checksum Disabling LRO when Rx checksum is disabled Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
-
Yitchak Gertner authored
Wrong structure size The wrong structure was used in the sizeof to clear (luckily both structures have the same size in this version...) Signed-off-by:
Yitchak Gertner <gertner@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
WoL capability All designs reported WoL capability regardless of HW limitations - check if this device is actually capable of WoL Signed-off-by:
-
Yitchak Gertner authored
Clearing MAC addresses filters When the driver unloads, it should clear the MAC addresses filters in the HW - this prevents packets from entering the chip when the driver is re-loaded before initializing the right filters Signed-off-by:
-
Yitchak Gertner authored
Delay in while loops The delay in the loop should be after the change. This has very little effect (can save one delay) but it is the right thing to do Signed-off-by:
-
Eilon Greenstein authored
PBA Table Page Alignment Workaround The PBA table starts on the middle of the page and that's causing very low performance with virtualization. The solution is not to update via the BAR directly but via chip access to the same memory Signed-off-by:
-
Yitchak Gertner authored
Self-test false positive - The memory test should use a mask according to the chip type - In the register test, check the port only once and not inside the for loop (not causing a failure - just ugly) Signed-off-by:
-
Eilon Greenstein authored
Memory allocation - The CQE ring was allocated to the max size even for a chip that does not support it. Fixed to allocate according to the chip type to save memory - The rx_page_ring was not freed on driver unload Signed-off-by:
-
Eilon Greenstein authored
HW attention lock Making sure that only one function will handle the HW attention. This makes the device parameter aeu_mask redundant so it is removed Signed-off-by:
-
Yitchak Gertner authored
HW lock mechanism Enhancing the HW lock to work per function and not only per port - this is needed for the next patch that protects races over HW attention detection between the different functions. At this chance, changing the functions names to be more inline with the current naming convention Signed-off-by:
-
