- 10 Apr, 2008 15 commits
-
-
Stephen Hemminger authored
Use vmalloc rather than alloc_pages to avoid wasting memory. The problem is that tnode structure has a power of 2 sized array, plus a header. So the current code wastes almost half the memory allocated because it always needs the next bigger size to hold that small header. This is similar to an earlier patch by Eric, but instead of a list and lock, I used a workqueue to handle the fact that vfree can't be done in interrupt context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rami Rosen authored
1) Standlaone ip6_null_entry is no longer needed as it is replaced by the ip6_null_entry member of ipv6 (instance of struct netns_ipv6) in struct net (as a result of Network Namespaces patches). 2) These 3 methods from this same header are not defined anywhere: ip6_rt_addr_add(), ip6_rt_addr_del(), rt6_sndmsg() Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cornelia Huck authored
If we register the iucv bus after the infrastructure is ready, userspace can start relying on it when it receives the uevent for the bus. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
This BUG_ON is not needed, since all (debug) checks are also done in smp_call_function() which gets called by this function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Robert P. J. Day authored
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
SKF_ADF_NLATTR searches for a netlink attribute, which avoids manually parsing and walking attributes. It takes the offset at which to start searching in the 'A' register and the attribute type in the 'X' register and returns the offset in the 'A' register. When the attribute is not found it returns zero. A top-level attribute can be located using a filter like this (example for nfnetlink, using struct nfgenmsg): ... { /* A = offset of first attribute */ .code = BPF_LD | BPF_IMM, .k = sizeof(struct nlmsghdr) + sizeof(struct nfgenmsg) }, { /* X = CTA_PROTOINFO */ .code = BPF_LDX | BPF_IMM, .k = CTA_PROTOINFO, }, { /* A = netlink attribute offset */ .code = BPF_LD | BPF_B | BPF_ABS, .k = SKF_AD_OFF + SKF_AD_NLATTR }, { /* Exit if not found */ .code = BPF_JMP | BPF_JEQ | BPF_K, .k = 0, .jt = <error> }, ... A nested attribute below the CTA_PROTOINFO attribute would then be parsed like this: ... { /* A += sizeof(struct nlattr) */ .code = BPF_ALU | BPF_ADD | BPF_K, .k = sizeof(struct nlattr), }, { /* X = CTA_PROTOINFO_TCP */ .code = BPF_LDX | BPF_IMM, .k = CTA_PROTOINFO_TCP, }, { /* A = netlink attribute offset */ .code = BPF_LD | BPF_B | BPF_ABS, .k = SKF_AD_OFF + SKF_AD_NLATTR }, ... The data of an attribute can be loaded into 'A' like this: ... { /* X = A (attribute offset) */ .code = BPF_MISC | BPF_TAX, }, { /* A = skb->data[X + k] */ .code = BPF_LD | BPF_B | BPF_IND, .k = sizeof(struct nlattr), }, ... Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rami Rosen authored
This patch removes two unused method declarations in include/net/ndisc.h: ndisc_forwarding_on(void) and ndisc_forwarding_off(void); Also igmp6_cleanup(void) appears twice in this header, so one igmp6_cleanup(void) declaration is removed. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gui Jianfeng authored
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Zefan authored
Should not count it if the allocation of the object is failed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Zefan authored
Should not count it if the allocation of this object failed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
No urgency on the rehash interval timer, so mark it as deferrable. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Since route hash is a triple, use jhash_3words rather doing the mixing directly. This should be as fast and give better distribution. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Don't mark functions that are large as inline, let compiler decide. Also, use inline rather than __inline__. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The sk_filter function is too big to be inlined. This saves 2296 bytes of text on allyesconfig. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Some minor style cleanups: * Move __KERNEL__ definitions to one place in filter.h * Use const for sk_filter_len * Line wrapping * Put EXPORT_SYMBOL next to function definition Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Apr, 2008 25 commits
-
-
Johannes Berg authored
The default_key symlink points to the key index rather than they key counter, fix it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This patch renames all mac80211 files (except ieee80211_i.h) to get rid of the useless ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Up to now, key manipulation is supposed to run under RTNL to avoid concurrent manipulations and also allow the set_key() hardware callback to sleep. This is not feasible because STA structs are rcu-protected and thus a lot of operations there cannot take the RTNL. Also, key references are rcu-protected so we cannot do things atomically. This patch changes key locking completely: * key operations are now atomic * hardware crypto offload is enabled and disabled from a workqueue, due to that key freeing is also delayed * debugfs code is also run from a workqueue * keys reference STAs (and vice versa!) so during STA unlink the STAs key reference is removed but not the keys STA reference, to avoid races key todo work is run before STA destruction. * fewer STA operations now need the RTNL which was required due to key operations This fixes the locking problems lockdep pointed out and also makes things more light-weight because the rtnl isn't required as much. Note that the key todo lock/key mutex are global locks, this is not required, of course, they could be per-hardware instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When a STA is supposed to be unlinked but is pinned, it still needs to be unlinked from all structures. Only at the end of the unlink process should we check for pin status and invalidate the callers reference if it is pinned. Move the pin status check down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jiri Slaby authored
These two symbols are used only in ifdeffed function. Move them to that section too. net/mac80211/sta_info.c:387: warning: `__sta_info_pin' defined but not used net/mac80211/sta_info.c:397: warning: `__sta_info_unpin' defined but not used Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Michael Wu <flamingice@sourmilk.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Machek authored
Remove some commented-out code from adm8211. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ron Rindjunsky authored
This patch contains next issues: 1 - prevents "stop BA session" multiple warnings 2 - adds debug print to stop Rx BA session flow 3 - adds EOL in one debug print Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
We must use the b43_is_mode() call to check the current interface operation mode. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
This fixes the initialization of the PHY TX control words in shared memory. These control words are used for management frames like beacons. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
This fixes beacon updating in the bottomhalf. In case the device is busy, we will defer to later in the IRQ handler. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohamed Abbas authored
Add new API to MAC80211 to allow low level driver to notify MAC with driver status. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The ieee80211_ioctl_giwrate() ioctl handler doesn't rcu_read_lock() its access to the sta table, fix it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Unfortunately, debugfs can be made to access invalid memory by open()ing a file and then waiting until the corresponding debugfs file has been removed (and, probably, the underlying object.) That could be exploited by any user if the user is able to open debugfs files and can cause networking devices, STA entries or similar to disappear which is quite easy to do. Hence, all debugfs files should be root-only. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
These are some beaconing related fixes. Basically it prevents the card from triggering the beacon IRQ over and over again. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When doing firmware-assisted scanning, iwlwifi drivers do not honour the regulatory control code that might disable channels that are enabled in the EEPROM, for example when the user is visiting another country and adjusted the regulatory domain accordingly. This patch fixes that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
When drivers receive change notification they may do work that will enable the changes to take effect. For example, if new association the device needs to be programmed with this information. Give the driver chance to make the changes before notifying the upper layer - thus preventing race condition where upper layer attempts to utilize state that may not be configured yet. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohamed Abbas authored
Do not free reference to device twice. After rfkill registration succeeds we only need to call rfkill_unregister() and not rfkill_free(). Also add some debugging. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
After the workqueue is notified the LED code may be accessed. Ensure that LED registration completes completely as part of initialization before anything waiting on this is notified. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch replaces ieee80211chan2mhz from radiotap with ieee80211_frequency_to_channel provided by mac80211 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch moves inline functions into iwl-core.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch make some cleanup in HW names Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
Now rt2x00lib handles the initial configure_filter() command, we can directly call lib->config_filter() in scheduled context since the called function will no longer check if anything has changed (which is now handled in rt2x00lib as well). This fixes a endless loop with USB drivers where the config_filter command was scheduled time and time again without sending any command to the device. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
If the driver does not specify a maximum power output, default to the regulatory max. Signed-off-by: John W. Linville <linville@tuxdriver.com>
-