- 25 Jul, 2008 40 commits
-
-
Arthur Jones authored
Static kobjects are not supported in linux kernel. Convert the edac_pci_top_main_kobj from static to dynamic. This avoids the double free of the edac_pci_top_main_kobj.name that we see on module reload of the e752x edac driver (and probably others as well). In addition Greg KH <greg@kroah.com> has pointed out that this code may be cleaned up significantly. I will look at that as a follow-on patch, for now, I just want the minimum fix to get this double-free oops bug squashed... Many thanks to Greg KH for his patience in showing me what the Documentation/kobject.txt already said (oops)... Signed-off-by:
Arthur Jones <ajones@riverbed.com> Signed-off-by:
Doug Thompson <dougthompson@xmission.com> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arthur Jones authored
Some code cleanliness issues found by Andrew Morton (thanks!) which should not affect functionality, but which should help make the code more maintainable. In particular, we now: * convert all #define's w/ a parameter to static inlines * use 1UL rather than 1ULL when calculating an unsigned long * use pci_disable_device The resulting code is tested and seems to work fine... Signed-off-by:
-
Arthur Jones authored
Explicitly unmask ECC errors we are interested in reporting. Signed-off-by:
-
Arthur Jones authored
It is possible that the BIOS did not enable ECC at boot time. We check for that case and fail to load if it is true. Signed-off-by:
-
Arthur Jones authored
The error mask we use to trigger ECC notifications is missing many bits of interest. We add these bits here so that all possible ECC errors can be reported. Signed-off-by:
-
Arthur Jones authored
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by:
-
Miklos Szeredi authored
If fuse filesystem doesn't define it's own lock operations, then allow the lock manager to work with fuse. Adding lockd support for remote locking is also possible, but more rarely used, so leave it till later. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Matthew Wilcox <matthew@wil.cx> Cc: David Teigland <teigland@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Miklos Szeredi authored
Implement the get_parent export operation by sending a LOOKUP request with ".." as the name. Implement looking up an inode by node ID after it has been evicted from the cache. This is done by seding a LOOKUP request with "." as the name (for all file types, not just directories). The filesystem can set the FUSE_EXPORT_SUPPORT flag in the INIT reply, to indicate that it supports these special lookups. Thanks to John Muir for the original implementation of this feature. Signed-off-by:
-
Miklos Szeredi authored
Add a new helper function which sends a LOOKUP request with the supplied name. This will be used by the next patch to send special LOOKUP requests with "." and ".." as the name. Signed-off-by:
-
Miklos Szeredi authored
Implement export_operations, to allow fuse filesystems to be exported to NFS. This feature has been in the out-of-tree fuse module, and is widely used and tested. It has not been originally merged into mainline, because doing the NFS export in userspace was thought to be a cleaner and more efficient way of doing it, than through the kernel. While that is true, it would also have involved a lot of duplicated effort at reimplementing NFS exporting (all the different versions of the protocol). This effort was unfortunately not undertaken by anyone, so we are left with doing it the easy but less efficient way. If this feature goes in, the out-of-tree fuse module can go away, which would have several advantages: - not having to maintain two versions - less confusion for users - no bugs due to kernel API changes Comment from hch: - Use the same fh_type values as XFS, since we use the same fh encoding. Signed-off-by:
-
Miklos Szeredi authored
Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS exporting. Signed-off-by:
-
Miklos Szeredi authored
Allow filesystem's ->lock() method to call posix_lock_file() instead of posix_lock_file_wait(), and return FILE_LOCK_DEFERRED. This makes it possible to implement a such a ->lock() function, that works with the lock manager, which needs the call to be asynchronous. Now the vfs_lock_file() helper can be used, so this is a cleanup as well. Signed-off-by:
-
Miklos Szeredi authored
Extract common code into a function. Signed-off-by:
-
Miklos Szeredi authored
Use a special error value FILE_LOCK_DEFERRED to mean that a locking operation returned asynchronously. This is returned by posix_lock_file() for sleeping locks to mean that the lock has been queued on the block list, and will be woken up when it might become available and needs to be retried (either fl_lmops->fl_notify() is called or fl_wait is woken up). f_op->lock() to mean either the above, or that the filesystem will call back with fl_lmops->fl_grant() when the result of the locking operation is known. The filesystem can do this for sleeping as well as non-sleeping locks. This is to make sure, that return values of -EAGAIN and -EINPROGRESS by filesystems are not mistaken to mean an asynchronous locking. This also makes error handling in fs/locks.c and lockd/svclock.c slightly cleaner. Signed-off-by:
-
Miklos Szeredi authored
Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead of NLM_LCK_DENIED. The latter means the lock request failed because of a conflicting lock (i.e. a temporary error), which is wrong in this case. Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock request returns with NLM_LOCK_DENIED. Signed-off-by:
-
Vegard Nossum authored
Cc: Shailabh Nagar <nagar@watson.ibm.com> Signed-off-by:
Vegard Nossum <vegard.nossum@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Keika Kobayashi authored
Update document and make getdelays.c show delay accounting for memory reclaim. For making a distinction between "swapping in pages" and "memory reclaim" in getdelays.c, MEM is changed to SWAP. Signed-off-by:
Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Keika Kobayashi authored
Add members for memory reclaim delay to taskstats, and accumulate them in __delayacct_add_tsk() . Signed-off-by:
-
Keika Kobayashi authored
Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by:
-
David Howells authored
Fix bacct_add_tsk()'s use of do_div() on an s64 by making ac_etime a u64 instead and dividing that. Possibly this should be guarded lest the interval calculation turn up negative, but the possible negativity of the result of the division is cast away, and it shouldn't end up negative anyway. This was introduced by patch f3cef7a9. Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by:
-
Andrea Righi authored
Report per-thread I/O statistics in /proc/pid/task/tid/io and aggregate parent I/O statistics in /proc/pid/io. This approach follows the same model used to account per-process and per-thread CPU times. As a practial application, this allows for example to quickly find the top I/O consumer when a process spawns many child threads that perform the actual I/O work, because the aggregated I/O statistics can always be found in /proc/pid/io. [ Oleg Nesterov points out that we should check that the task is still alive before we iterate over the threads, but also says that we can do that fixup on top of this later. - Linus ] Acked-by:
Andrea Righi <righi.andrea@gmail.com> Cc: Matt Heaton <matt@hostmonster.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Acked-by-with-comments: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Pavel Emelyanov authored
Fix the one describing what this function is and add one more - about locking absence around pid namespaces loop. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Pavel Emelyanov authored
This just makes the acct_proces walk the pid namespaces from current up to the top and account a task in each with the accounting turned on. ns->parent access if safe lockless, since current it still alive and holds its namespace, which in turn holds its parent. Signed-off-by:
-
Pavel Emelyanov authored
All the bsd_acct_strcts with opened accounting are linked into a global list. So, the acct_auto_close(_mnt) walks one and drops the accounting for each. Signed-off-by:
-
Pavel Emelyanov authored
Allocate the structure on the first call to sys_acct(). After this each namespace, that ordered the accounting, will live with this structure till its own death. Two notes - routines, that close the accounting on fs umount time use the init_pid_ns's acct by now; - accounting routine accounts to dying task's namespace (also by now). Signed-off-by:
-
Pavel Emelyanov authored
This adds the appropriate pointer to all the internal (i.e. static) functions that work with global acct instance. API calls pass a global instance to them (while we still have such). Mostly this is a s/acct_globals./acct->/ over the file. Signed-off-by:
-
Pavel Emelyanov authored
Don't use per-bsd-acct-struct lock, but work with a global one. This lock is taken for short periods, so it doesn't seem it'll become a bottleneck, but it will allow us to easily avoid many locking difficulties in the future. So this is a mostly s/acct_globals.lock/acct_lock/ over the file. Signed-off-by:
-
Pavel Emelyanov authored
We're going to have many bsd_acct_struct instances, not just one, so the timer (currently working with a global one) has to know which one to work with. Use a handy setup_timer macro for it (thanks to Oleg for one). Signed-off-by:
-
Pavel Emelyanov authored
The acct_process does not accept any arguments actually. Signed-off-by:
-
Pavel Emelyanov authored
All the bsdacct-related info will be stored in the area, pointer by this one. It will be NULL automatically for all new namespaces. Signed-off-by:
-
Pavel Emelyanov authored
It makes many fields initialization implicit helping in auto-setting #ifdef-ed fields (bsd-acct related pointer will be such). Signed-off-by:
-
Pavel Emelyanov authored
After I fixed access to task->tgid in kernel/acct.c, Oleg pointed out some bad side effects with this accounting vs pid namespaces interaction. I.e. when some task in pid namespace sets this accounting up, this blocks all the others from doing the same. Restricting this to init namespace only could help, but didn't look a graceful solution. So here is the approach to make this accounting work with pid namespaces properly. The idea is simple - when a task dies it accounts itself in each namespace it is visible from and which set the accounting up. For example here are the commands run and the output of lastcomm from init and sub namespaces: init_ns# accton pacct sub_ns# accton pacct (this is a different file - sub ns is run in a chroot-ed environment) init_ns# cat /dev/null sub_ns# ls /dev/null init_ns# accton sub_ns# accton sub_ns# lastcomm -f pacct ls 0 [136,0] 0.00 secs Thu May 15 10:30 accton 0 [136,0] 0.00 secs Thu May 15 10:30 init_ns# lastcomm -f pacct accton root pts/0 0.00 secs Thu May 15 14:30 << got from sub cat root pts/1 0.00 secs Thu May 15 14:30 ls root pts/0 0.00 secs Thu May 15 14:30 << got from sub accton root pts/1 0.00 secs Thu May 15 14:30 That was the summary, the details are in patches. This patch: It will be visible in pid_namespace.h file, so fix its name to look better outside the acct.c file. Signed-off-by: -
Jonathan Lim authored
Adapt acct_update_integrals() to include user time when calculating the time difference. The units of acct_rss_mem1 and acct_vm_mem1 are also changed from pages-jiffies to pages-usecs to avoid calling jiffies_to_usecs() in xacct_add_tsk() which might overflow. Signed-off-by:
Jonathan Lim <jlim@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Adrian Bunk authored
With the removal of the Solaris binary emulation the export of uts_sem became unused. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Harvey Harrison authored
kernel/trace/trace_sysprof.c:164:20: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by:
-
Mathieu Desnoyers authored
rcu_barrier_sched() and call_rcu_sched() were introduced in 2.6.26 for the Markers. Change the marker code to use them. It can be seen as a fix since the marker code was using an ugly, temporary, #ifdef hack to work around CONFIG_PREEMPT_RCU. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by:
Paul McKenney <paulmck@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Matthias Kaehlcke authored
ATA over Ethernet: The semaphore emsgs_sema is used for signalling an event, convert it in a completion. Signed-off-by:
Matthias Kaehlcke <matthias@kaehlcke.net> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by:
-
Pavel Emelyanov authored
It seems to me that it was a mistake marking this function as deprecated and scheduling it for removal, rather than resolutely removing it after the last caller's death. Anyway - better late, then never. Signed-off-by:
-
Pavel Emelyanov authored
This one had the only users so far - the kill_proc, which is removed, so drop this (invalid in namespaced world) call too. And of course - erase all references on it from comments. Signed-off-by:
-
Pavel Emelyanov authored
This function operated on a pid_t to kill a task, which is no longer valid in a containerized system. It has finally lost all its users and we can safely remove it from the tree. Signed-off-by:
-
