* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

Removed duplicated #include in kernel/trace/trace.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits)
  ide-cd: remove dead dsc_overlap setting
  ide: push local_irq_{save,restore}() to do_identify()
  ide: remove superfluous local_irq_{save,restore}() from ide_dump_status()
  ide: move legacy ISA/VLB ports handling to ide-legacy.c (v2)
  ide: move Power Management support to ide-pm.c
  ide: use ATA_DMA_* defines in ide-dma-sff.c
  ide: checkpatch.pl fixes for ide-lib.c
  ide: remove inline tags from ide-probe.c
  ide: remove redundant code from ide_end_drive_cmd()
  ide: struct device - replace bus_id with dev_name(), dev_set_name()
  ide: rework handling of serialized ports (v2)
  cy82c693: remove superfluous ide_cy82c693 chipset type
  trm290: add IDE_HFLAG_TRM290 host flag
  ide: add ->max_sectors field to struct ide_port_info
  rz1000: apply chipset quirks early (v2)
  ide: always set nIEN on idle devices
  ide: fix ->quirk_list checking in ide_do_request()
  gayle: set IDE_HFLAG_SERIALIZE explictly
  cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  ali14xx: doesn't use shared IRQs
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: ensure symlinks are NUL-terminated

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_sil: add Large Block Transfer support
  [libata] ata_piix: cleanup dmi strings checking
  DMI: add dmi_match
  libata: blacklist NCQ on OCZ CORE 2 SSD (resend)
  [libata] Update kernel-doc comments to match source code
  libata: perform port detach in EH
  libata: when restoring SControl during detach do the PMP links first
  libata: beef up iterators

Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile: select RING_BUFFER
  ring_buffer: adding EXPORT_SYMBOLs
  oprofile: fix lost sample counter
  oprofile: remove nr_available_slots()
  oprofile: port to the new ring_buffer
  ring_buffer: add remaining cpu functions to ring_buffer.h
  oprofile: moving cpu_buffer_reset() to cpu_buffer.h
  oprofile: adding cpu_buffer_entries()
  oprofile: adding cpu_buffer_write_commit()
  oprofile: adding cpu buffer r/w access functions
  ftrace: remove unused function arg in trace_iterator_increment()
  ring_buffer: update description for ring_buffer_alloc()
  oprofile: set values to default when creating oprofilefs
  oprofile: implement switch/case in buffer_sync.c
  x86/oprofile: cleanup IBS init/exit functions in op_model_amd.c
  x86/oprofile: reordering IBS code in op_model_amd.c
  oprofile: fix typo
  oprofile: whitspace changes only
  oprofile: update comment for oprofile_add_sample()
  oprofile: comment cleanup

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: avoid leaking caches or refcounts on sysfs error
  slab: Fix comment on #endif
  slab: remove GFP_THISNODE clearing from alloc_slabmgmt()
  slub: Add might_sleep_if() to slab_alloc()
  SLUB: failslab support
  slub: Fix incorrect use of loose
  slab: Update the kmem_cache_create documentation regarding the name parameter
  slub: make early_kmem_cache_node_alloc void
  slab: unsigned slabp->inuse cannot be less than 0
  slub - fix get_object_page comment
  SLUB: Replace __builtin_return_address(0) with _RET_IP_.
  SLUB: cleanup - define macros instead of hardcoded numbers

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (37 commits)
  drm/i915: fix modeset devname allocation + agp init return check.
  drm/i915: Remove redundant test in error path.
  drm: Add a debug node for vblank state.
  drm: Avoid use-before-null-test on dev in drm_cleanup().
  drm/i915: Don't print to dmesg when taking signal during object_pin.
  drm: pin new and unpin old buffer when setting a mode.
  drm/i915: un-EXPORT and make 'intelfb_panic' static
  drm/i915: Delete unused, pointless i915_driver_firstopen.
  drm/i915: fix sparse warnings: returning void-valued expression
  drm/i915: fix sparse warnings: move 'extern' decls to header file
  drm/i915: fix sparse warnings: make symbols static
  drm/i915: fix sparse warnings: declare one-bit bitfield as unsigned
  drm/i915: Don't double-unpin buffers if we take a signal in evict_everything().
  drm/i915: Fix fbcon setup to align display pitch to 64b.
  drm/i915: Add missing userland definitions for gem init/execbuffer.
  i915/drm: provide compat defines for userspace for certain struct members.
  drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.
  drm: sanitise drm modesetting API + remove unused hotplug
  drm: fix allowing master ioctls on non-master fds.
  drm/radeon: use locked rmmap to remove sarea mapping.
  ...

* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/intel: Fix broken ® symbol in device name.
  agp/intel: add support for G41 chipset

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (98 commits)
  sparc: move select of ARCH_SUPPORTS_MSI
  sparc: drop SUN_IO
  sparc: unify sections.h
  sparc: use .data.init_task section for init_thread_union
  sparc: fix array overrun check in of_device_64.c
  sparc: unify module.c
  sparc64: prepare module_64.c for unification
  sparc64: use bit neutral Elf symbols
  sparc: unify module.h
  sparc: introduce CONFIG_BITS
  sparc: fix hardirq.h removal fallout
  sparc64: do not export pus_fs_struct
  sparc: use sparc64 version of scatterlist.h
  sparc: Commonize memcmp assembler.
  sparc: Unify strlen assembler.
  sparc: Add asm/asm.h
  sparc: Kill memcmp_32.S code which has been ifdef'd out for centuries.
  sparc: replace for_each_cpu_mask_nr with for_each_cpu
  sparc: fix sparse warnings in irq_32.c
  sparc: add include guards to kernel.h
  ...

* 'for-2.6.29' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  bio: get rid of bio_vec clearing
  bounce: don't rely on a zeroed bio_vec list
  cciss: simplify parameters to deregister_disk function
  cfq-iosched: fix race between exiting queue and exiting task
  loop: Do not call loop_unplug for not configured loop device.
  loop: Flush possible running bios when loop device is released.
  alpha: remove dead BIO_VMERGE_BOUNDARY
  Get rid of CONFIG_LSF
  block: make blk_softirq_init() static
  block: use min_not_zero in blk_queue_stack_limits
  block: add one-hit cache for disk partition lookup
  cfq-iosched: remove limit of dispatch depth of max 4 times quantum
  nbd: tell the block layer that it is not a rotational device
  block: get rid of elevator_t typedef
  aio: make the lookup_ioctx() lockless
  bio: add support for inlining a number of bio_vecs inside the bio
  bio: allow individual slabs in the bio_set
  bio: move the slab pointer inside the bio_set
  bio: only mempool back the largest bio_vec slab cache
  block: don't use plugging on SSD devices
  ...

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, sparseirq: clean up Kconfig entry
  x86: turn CONFIG_SPARSE_IRQ off by default
  sparseirq: fix numa_migrate_irq_desc dependency and comments
  sparseirq: add kernel-doc notation for new member in irq_desc, -v2
  locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
  sparseirq, xen: make sure irq_desc is allocated for interrupts
  sparseirq: fix !SMP building, #2
  x86, sparseirq: move irq_desc according to smp_affinity, v7
  proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
  sparse irqs: add irqnr.h to the user headers list
  sparse irqs: handle !GENIRQ platforms
  sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
  sparseirq: fix Alpha build failure
  sparseirq: fix typo in !CONFIG_IO_APIC case
  x86, MSI: pass irq_cfg and irq_desc
  x86: MSI start irq numbering from nr_irqs_gsi
  x86: use NR_IRQS_LEGACY
  sparse irq_desc[] array: core kernel and x86 changes
  genirq: record IRQ_LEVEL in irq_desc[]
  irq.h: remove padding from irq_desc on 64bits

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix warning in kernel/hrtimer.c
  x86: make sure we really have an hpet mapping before using it
  x86: enable HPET on Fujitsu u9200
  linux/timex.h: cleanup for userspace
  posix-timers: simplify de_thread()->exit_itimers() path
  posix-timers: check ->it_signal instead of ->it_pid to validate the timer
  posix-timers: use "struct pid*" instead of "struct task_struct*"
  nohz: suppress needless timer reprogramming
  clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
  nohz: no softirq pending warnings for offline cpus
  hrtimer: removing all ur callback modes, fix
  hrtimer: removing all ur callback modes, fix hotplug
  hrtimer: removing all ur callback modes
  x86: correct link to HPET timer specification
  rtc-cmos: export second NVRAM bank

Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.

* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.

dsc_overlap setting is not useful anymore for ide-cd so remove
"dsc_overlap" /proc setting, disallow changing the setting through
HDIO_SET_NICE ioctl and cleanup ide_cd{rom_setup,_release}().

Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Push local_irq_{save,restore}() from actual_try_to_identify()
to do_identify() and remove no longer needed local_irq_enable().
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

No reason to run this function with local IRQs off.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move legacy ISA/VLB ports handling from ide-probe.c to ide-legacy.c.

* Add CONFIG_IDE_LEGACY config option to be selected by host drivers
  needing ide-legacy.c.

v2:
Fix CONFIG_IDE_LEGACY not being defined in Kconfig.
(from Takashi Iwai <tiwai@suse.de>)

There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

In few places open-coded values were still being used.  Fix it.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix following errors/warnings detected by checkpatch.pl:

- WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
- WARNING: space prohibited between function name and open parenthesis '('
- ERROR: trailing whitespace
- ERROR: trailing statements should be on next line
- WARNING: printk() should include KERN_ facility level
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Let the compiler handle it.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

rq->errors is overwritten later in this function.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* hpt366: set IDE_HFLAG_SERIALIZE in ->host_flags if needed
  in init_hwif_hpt366().  Remove HPT_SERIALIZE_IO while at it.

* Set IDE_HFLAG_SERIALIZE in ->host_flags if needed in
  ide_init_port().

* Convert init_irq() to use IDE_HFLAG_SERIALIZE together with
  hwif->host to find out ports which need to be serialized.

* Remove no longer needed save_match() and ide_hwif_t.serialized.

v2:
* Set host's ->host_flags field instead of port's copy.

This patch should fix the incorrect grouping of port(s) from
host(s) that need serialization with port(s) that happen to use
the same IRQ(s) but are from the host(s) that don't need it.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since CY82C693 doesn't require serialization we may as well
use the default ide_pci chipset type.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_TRM290 host flag and use it in ide_build_dmatable().

* Remove no longer needed ide_trm290 chipset type.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ->max_sectors field to struct ide_port_info to allow host drivers
  to specify value used for hwif->rqsize (if smaller than the default).

* Convert pdc202xx_old to use ->max_sectors and remove no longer needed
  IDE_HFLAG_RQSIZE_256 flag.

There should be no functional changes caused by this patch.
Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use pci_name(dev) instead of hwif->name in init_hwif_rz1000().

* init_hwif_rz1000() -> rz1000_init_chipset().  Update rz1000_init_one()
  to use rz1000_init_chipset() and add now required rz1000_remove().

* Remove superfluous ide_rz1000 chipset type.

v2:
* unsigned int rz1000_init_chipset() -> int rz1000_disable_readahead()
  per Sergei's suggestion.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set nIEN for previous port/device in ide_do_request()
  also if port uses a non-shared IRQ.

* Remove no longer needed ide_hwif_t.sharing_irq.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix nIEN quirk check to also omit quirky devices using pdc202xx_{new,old}
host drivers for which ->quirk_list == 2.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If IDE doubler is used ports need to be serialized.  Currently
init_irq() handles it fine but lets also set IDE_HFLAG_SERIALIZE
host flag explicitly in preparation for future changes.

Also convert the driver to use struct ide_port_info while at it.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set IDE_HFLAG_SERIALIZE explictly for CMD646.

* Remove no longer needed ide_cmd646 chipset type (which has
  a nice side-effect of fixing handling of unexpected IRQs).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

init_irq() shouldn't use IRQF_SHARED for ali14xx IDE IRQ handler.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It doesn't make much sense nowadays and is problematic on some drives.

Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Both choose_drive() and PM handling code make sure that the queue
is unplugged so no need to check it again.

Cc: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Now that (almost) all host drivers have been fixed not to abuse ide_lock
and core code usage of ide_lock has been sanitized we may safely replace
ide_lock by per-hwgroup locks.

This patch is partially based on earlier patch from Ravikiran G Thirumalai.

While at it:
- don't use deprecated HWIF() and HWGROUP() macros
- update locking documentation in ide.h

v2:
Add missing spin_lock_init(&hwgroup->lock).  (Noticed by Elias Oltmanns)

Cc: Vaibhav V. Nivargi <vaibhav.nivargi@gmail.com>
Cc: Alok N. Kataria <alokk@calsoftinc.com>
Cc: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is just a preparation for future changes and there should be no
functional changes caused by this patch since ide_lock is currently
also used as queue lock.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use blk_end_request() instead of ide_lock + __blk_end_request()
in cdrom_end_request(), cdrom_newpc_intr(), __ide_end_request(),
ide_complete_pm_request() and ide_end_drive_cmd().

[ ide_lock is currently also used as queue lock ]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

__ide_end_request() needs ide_lock only for __blk_end_request()
call so push ide_lock taking inside __ide_end_requests().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>