- 14 Aug, 2008 4 commits
-
-
Brice Goglin authored
When myri10ge_fw_name is given, use it to override the rss firmware name as well. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Mikael Pettersson authored
The arm ixp4xx_eth driver doesn't compile in 2.6.27-rc1: CC [M] drivers/net/arm/ixp4xx_eth.o drivers/net/arm/ixp4xx_eth.c: In function 'eth_poll': drivers/net/arm/ixp4xx_eth.c:554: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:554: error: too few arguments to function 'dma_mapping_error' drivers/net/arm/ixp4xx_eth.c: In function 'eth_xmit': drivers/net/arm/ixp4xx_eth.c:701: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:701: error: too few arguments to function 'dma_mapping_error' drivers/net/arm/ixp4xx_eth.c: In function 'init_queues': drivers/net/arm/ixp4xx_eth.c:886: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast drivers/net/arm/ixp4xx_eth.c:886: error: too few arguments to function 'dma_mapping_error' make[3]: *** [drivers/net/arm/ixp4xx_eth.o] Error 1 make[2]: *** [drivers/net/arm] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 dma_mapping_error() changed in 2.6.27-rc1 to also take a device parameter, but nobody bothered updating ixp4xx_eth.c. Fixed by passing the appropriate device value in the dma_mapping_error() calls. Tested on an ixp425 box. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Acked-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Scott Wood authored
gfar_halt() was factored out into halting and disabling by commit d87eb127, as the suspend() method only wants to do the former. However, the call to gfar_halt_nodisable() from gfar_halt() apparently got lost during the patch respin process. This adds it back. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Huang Weiyi authored
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/acenic.c drivers/net/bnx2x_link.c drivers/net/bnx2x_main.c drivers/net/cpmac.c drivers/net/gianfar_sysfs.c drivers/net/ipg.h drivers/net/ppp_mppe.c drivers/net/pppol2tp.c drivers/net/r6040.c drivers/net/sh_eth.c drivers/net/sky2.c drivers/net/tehuti.h drivers/net/typhoon.c This patch removes the said #include <linux/version.h>. Signed-off-by:
Huang Weiyi <hwy@cn.fujitsu.com> Signed-off-by:
-
- 13 Aug, 2008 36 commits
-
-
Daniel Lezcano authored
This patch makes the multicast socket to be per namespace. When a network namespace is created, other than the init_net and a multicast packet is received, the kernel goes to a hang or a kernel panic. How to reproduce ? * create a child network namespace * create a pair virtual device veth * ip link add type veth * move one side to the pair network device to the child namespace * ip link set netns <childpid> dev veth1 * ping -I veth0 224.0.0.1 The bug appears because the function ip_mc_init_dev does not initialize the different multicast fields as it exits because it is not the init_net. BUG: soft lockup - CPU#0 stuck for 61s! [avahi-daemon:2695] Modules linked in: irq event stamp: 50350 hardirqs last enabled at (50349): [<c03ee949>] _spin_unlock_irqrestore+0x34/0x39 hardirqs last disabled at (50350): [<c03ec639>] schedule+0x9f/0x5ff softirqs last enabled at (45712): [<c0374d4b>] ip_setsockopt+0x8e7/0x909 softirqs last disabled at (45710): [<c03ee682>] _spin_lock_bh+0x8/0x27 Pid: 2695, comm: avahi-daemon Not tainted (2.6.27-rc2-00029-g0872073 #3) EIP: 0060:[<c03ee47c>] EFLAGS: 00000297 CPU: 0 EIP is at __read_lock_failed+0x8/0x10 EAX: c4f38810 EBX: c4f38810 ECX: 00000000 EDX: c04cc22e ESI: fb0000e0 EDI: 00000011 EBP: 0f02000a ESP: c4e3faa0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 44618a40 CR3: 04e37000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c02311f8>] ? _raw_read_lock+0x23/0x25 [<c0390666>] ? ip_check_mc+0x1c/0x83 [<c036d478>] ? ip_route_input+0x229/0xe92 [<c022e2e4>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c0104c9c>] ? do_IRQ+0x69/0x7d [<c0102e64>] ? restore_nocheck_notrace+0x0/0xe [<c036fdba>] ? ip_rcv+0x227/0x505 [<c0358764>] ? netif_receive_skb+0xfe/0x2b3 [<c03588d2>] ? netif_receive_skb+0x26c/0x2b3 [<c035af31>] ? process_backlog+0x73/0xbd [<c035a8cd>] ? net_rx_action+0xc1/0x1ae [<c01218a8>] ? __do_softirq+0x7b/0xef [<c0121953>] ? do_softirq+0x37/0x4d [<c035b50d>] ? dev_queue_xmit+0x3d4/0x40b [<c0122037>] ? local_bh_enable+0x96/0xab [<c035b50d>] ? dev_queue_xmit+0x3d4/0x40b [<c012181e>] ? _local_bh_enable+0x79/0x88 [<c035fcb8>] ? neigh_resolve_output+0x20f/0x239 [<c0373118>] ? ip_finish_output+0x1df/0x209 [<c0373364>] ? ip_dev_loopback_xmit+0x62/0x66 [<c0371db5>] ? ip_local_out+0x15/0x17 [<c0372013>] ? ip_push_pending_frames+0x25c/0x2bb [<c03891b8>] ? udp_push_pending_frames+0x2bb/0x30e [<c038a189>] ? udp_sendmsg+0x413/0x51d [<c038a1a9>] ? udp_sendmsg+0x433/0x51d [<c038f927>] ? inet_sendmsg+0x35/0x3f [<c034f092>] ? sock_sendmsg+0xb8/0xd1 [<c012d554>] ? autoremove_wake_function+0x0/0x2b [<c022e6de>] ? copy_from_user+0x32/0x5e [<c022e6de>] ? copy_from_user+0x32/0x5e [<c034f238>] ? sys_sendmsg+0x18d/0x1f0 [<c0175e90>] ? pipe_write+0x3cb/0x3d7 [<c0170347>] ? do_sync_write+0xbe/0x105 [<c012d554>] ? autoremove_wake_function+0x0/0x2b [<c03503b2>] ? sys_socketcall+0x176/0x1b0 [<c01085ea>] ? syscall_trace_enter+0x6c/0x7b [<c0102e1a>] ? syscall_call+0x7/0xb Signed-off-by:Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eilon Greenstein authored
Version update Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Checkpatch compliance The latest version of checkpatch found the following style errors in the code Signed-off-by:
-
Eilon Greenstein authored
Spelling mistakes Spelling has to L's in it... Signed-off-by:
-
Eilon Greenstein authored
Minor code improvements Small changes to make the code a little bit more efficient and mostly more readable: - Using unified macros for EMAC_RD/WR which looks like normal REG_RD/WR - Removing the NIG_WR since it did nothing and was only confusing - On bnx2x_panic_dump, print only the used parts of the rings - define parameters only on the branch they are needed and not at the beginning of the function - using NETIF_MSG_INTR and not private BNX2X_MSG_SP for debug prints Signed-off-by:
-
Eilon Greenstein authored
Driver info The internal FW which is downloaded by the driver should not be displayed - it is only causing confusion and it is redundant since it can be concluded from the driver version. Display only FW which is burned on the board nvram Signed-off-by:
-
Eilon Greenstein authored
1G LED does not turn off The 1G LED was not switched to off when the link was lost Signed-off-by:
-
Yaniv Rosner authored
8073 PHY changes The initial support we had for this PHY needs some serious changing. The major change is that this PHY should be initialized only when the first function is loaded and not for each function. The official SPI-ROM of this PHY was released and it requires some changes in the initialization code as well Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Change GPIO for any port The set GPIO function should receive the port index to allow changing the GPIO of another port. This is needed for the common init phase (one the first driver is loaded for the chip) Signed-off-by:
-
Yaniv Rosner authored
Pause settings - 1G pause was not working due to missing write to the emac block (TX_MODE_FLOW_EN) - The flow control should use the negotiated result (after autoneg) so we should save both the requested autoneg and the result - The HW credits with flow control at 1G speed were not optimized and caused low throughput - It is recommended to turn off flow control if the MTU is bigger than 5000B due to internal buffers size Signed-off-by:
-
Yaniv Rosner authored
Link order with external PHY When external PHY exists (second chip with the PHY to translate to another physical medium) the link with the eternal PHY and the network should be established before setting the link between the 5771x and the PHY. This is the right order and it is important when using autoneg - the link to the network should use the autoneg and the link between the two chips should be forced to the network result. Signed-off-by:
-
Vladislav Zolotarov authored
No LRO without Rx checksum Disabling LRO when Rx checksum is disabled Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
-
Yitchak Gertner authored
Wrong structure size The wrong structure was used in the sizeof to clear (luckily both structures have the same size in this version...) Signed-off-by:
Yitchak Gertner <gertner@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
WoL capability All designs reported WoL capability regardless of HW limitations - check if this device is actually capable of WoL Signed-off-by:
-
Yitchak Gertner authored
Clearing MAC addresses filters When the driver unloads, it should clear the MAC addresses filters in the HW - this prevents packets from entering the chip when the driver is re-loaded before initializing the right filters Signed-off-by:
-
Yitchak Gertner authored
Delay in while loops The delay in the loop should be after the change. This has very little effect (can save one delay) but it is the right thing to do Signed-off-by:
-
Eilon Greenstein authored
PBA Table Page Alignment Workaround The PBA table starts on the middle of the page and that's causing very low performance with virtualization. The solution is not to update via the BAR directly but via chip access to the same memory Signed-off-by:
-
Yitchak Gertner authored
Self-test false positive - The memory test should use a mask according to the chip type - In the register test, check the port only once and not inside the for loop (not causing a failure - just ugly) Signed-off-by:
-
Eilon Greenstein authored
Memory allocation - The CQE ring was allocated to the max size even for a chip that does not support it. Fixed to allocate according to the chip type to save memory - The rx_page_ring was not freed on driver unload Signed-off-by:
-
Eilon Greenstein authored
HW attention lock Making sure that only one function will handle the HW attention. This makes the device parameter aeu_mask redundant so it is removed Signed-off-by:
-
Yitchak Gertner authored
HW lock mechanism Enhancing the HW lock to work per function and not only per port - this is needed for the next patch that protects races over HW attention detection between the different functions. At this chance, changing the functions names to be more inline with the current naming convention Signed-off-by:
-
Vladislav Zolotarov authored
Load/Unload under traffic Few issues were found when loading and unloading under traffic: - When receiving Tx interrupt call netif_wake_queue if the queue is stopped but the state is open - Check that interrupts are enabled before doing anything else on the msix_fp_int function - In nic_load, enable the interrupts only when needed and ready for it - Function stop_leading returns status since it can fail - Add 1ms delay when unloading the driver to validate that there are no open transactions that already started by the FW - Splitting the "has work" function into Tx and Rx so the same function will be used on unload and interrupts - Do not request for WoL if only resetting the device (save the time that it takes the FW to set the link after reset) - Fixing the device reset after iSCSI boot and before driver load - all internal buffers must be cleared before the driver is loaded Signed-off-by:
-
Eilon Greenstein authored
FW Internal Memory structure The FW uses data structures on the chip internal memory to aggregate the connections when TPA is enabled. The driver was clearing the wrong offsets and therefore one function could cause another function to loose packets. Changing the initialization of the chip internal memory to clear only the relevant memory for each function which is being loaded Signed-off-by:
-
Yitchak Gertner authored
Statistics - Making sure that each drop is accounted for in the driver statistics - Clearing the FW statistics when driver is loaded to prevent inconsistency with HW statistics - Once error is detected (bnx2x_panic_dump), stop the statistics before other actions (currently it is stopped last and can corrupt the data) - Adding HW checksum error counter to the statistics - Removing unused variable stats_ticks - Using macros instead of magic numbers to indicate which statistics are shared per port and which are per function Signed-off-by:
-
Eilon Greenstein authored
Not dropping packets with L3/L4 checksum error Those packets should be passed to the OS. The problem is clear in forwarding mode. Signed-off-by:
-
Eilon Greenstein authored
FW (bootcode) interface fixes - Making sure that the device will not cause kernel panic of the bootcode is corrupted or missing - Removing module debug parameter "nomcp" since no one should work without the bootcode (this is a left over from the chip bring up days) - Instead of waiting fix amount of time for bootcode response, sample it every 10ms (usually the answer is ready after less than 10ms) Signed-off-by:
-
Jarek Poplawski authored
gen_kill_estimator() required rtnl_lock() protection, but since it is moved to an RCU callback __qdisc_destroy() let's use est_lock instead. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
David S. Miller authored
Based upon discussions with Jarek P. and Herbert Xu. First, we're testing the wrong qdisc. We just reset the device queue qdiscs to &noop_qdisc and checking it's state is completely pointless here. We want to wait until the previous qdisc that was sitting at the ->qdisc pointer is not busy any more. And that would be ->qdisc_sleeping. Because of how we propagate the samples qdisc pointer down into qdisc_run and friends via per-cpu ->output_queue and netif_schedule, we have to wait also for the __QDISC_STATE_SCHED bit to clear as well. Signed-off-by: -
Jarek Poplawski authored
Recent changes introduced a bug in htb_delete(): cl->parent->children counter update misses checking cl->parent for NULL, which is used for root classes, so deleting them causes an oops. Signed-off-by:
-
Andrew Gallatin authored
With the new multi-queue transmit code, it is possible to accidentally make pktgen pick a non-existing tx queue simply by using a stale script to drive pktgen. Access to this non-existing tx queue will then trigger a bad memory access and kill the machine. For example, setting "queue_map_max 2" will cause my machine to die when accessing a garbage spinlock in the non-existing tx queue: BUG: spinlock bad magic on CPU#0, kpktgend_0/564 lock: ffff88001ddf6718, .magic: ffffffff, .owner: /-1, .owner_cpu: 0 Pid: 564, comm: kpktgend_0 Not tainted 2.6.27-rc3 #35 Call Trace: [<ffffffff803a1228>] spin_bug+0xa4/0xac [<ffffffff803a1253>] _raw_spin_lock+0x23/0x123 [<ffffffff8055b06f>] _spin_lock_bh+0x17/0x1b [<ffffffff804cb57d>] pktgen_thread_worker+0xa97/0x1002 [<ffffffff8022874d>] ? finish_task_switch+0x38/0x97 [<ffffffff80242077>] ? autoremove_wake_function+0x0/0x36 [<ffffffff80242077>] ? autoremove_wake_function+0x0/0x36 [<ffffffff804caae6>] ? pktgen_thread_worker+0x0/0x1002 [<ffffffff80241a40>] kthread+0x44/0x6d [<ffffffff8020c399>] child_rip+0xa/0x11 [<ffffffff802419fc>] ? kthread+0x0/0x6d [<ffffffff8020c38f>] ? child_rip+0x0/0x11 The attached patch adds some sanity checking to prevent these sorts of configuration errors. Signed-off-by:
Andrew Gallatin <gallatin@myri.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Thanks to Eugene Teo for reporting this problem. Signed-off-by:
Eugene Teo <eugenete@kernel.sg> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Jean-Christophe DUBOIS authored
Small fix removing an unnecessary intermediate variable. Signed-off-by:
Jean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by:
-
Jamal Hadi Salim authored
Flushing must consistently return ENOMEM on failure of any allocation Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Jamal Hadi Salim authored
Flushing of actions has been broken since we changed the semantics of netlink parsed tb[X] to mean X is an attribute type. This makes the flushing work. Signed-off-by:
-
Julien Brunel authored
In case of error, the function rxrpc_get_transport returns an ERR pointer, but never returns a NULL pointer. So after a call to this function, a NULL test should be replaced by an IS_ERR test. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @correct_null_test@ expression x,E; statement S1, S2; @@ x = rxrpc_get_transport(...) <... when != x = E if ( ( - x@p2 != NULL + ! IS_ERR ( x ) | - x@p2 == NULL + IS_ERR( x ) ) ) S1 else S2 ...> ? x = E; // </smpl> Signed-off-by:
Julien Brunel <brunel@diku.dk> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Jamal Hadi Salim authored
In the minimal the wireless extensions oughta send at least the name in addition to the ifindex. Signed-off-by:
-
