I put together this basic OMAP2 identification code, since I would need
to distinguish between 2410 and 2420.

The second patch makes an attempt to fix up places where
cpu_is_omap2420() is used, replacing them with the newly introduced more
type specific macros. These are based on comments in the code.

Change DMA interface to allow adding 24xx DMA support. Note that this
interface will change again after the 24xx DMA support has been merged.

Add cpu_class_is_omap1() and cpu_class_is_omap2() macros

I forgot that the fbconsole code is using a palette even though we
are in true color mode, so we have to handle that case separately.

all unnecessary clocks at the loader caught this.

The BURST_4 is 2 instead of 1

OMAP: Add 24xx DMA irq defines

Add bits of SD support that depend on new APIs:

 - detect the readonly slider on the cards;
 - report when the hardware supports 4-bit wide reads;
 - enable 4-bit reads when the upper layer put the card into that mode
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Kevin Hilman <khilman@mvista.com>

Clean up omap2 reboot now that cpu_v6_proc_fin is added

Added mach-omap2/devices.c accidentally left out

The -rc4 release was supposed to be the last -rc, but here goes.  The
RCU fixes and the swiotlb changes need an -rc for final testing.

	Missing half of the [PATCH] uml: Fix sysrq-r support for skas mode
We need to remove these (UPT_[DEFG]S) from the read side as well as the
write one - otherwise it simply won't build.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Found in the -rt patch set.  The scsi_error thread likely will be in the
TASK_INTERRUPTIBLE state upon exit.  This patch fixes this bug.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This introduces a limit parameter to the core bootmem allocator; The new
parameter indicates that physical memory allocated by the bootmem
allocator should be within the requested limit.

We also introduce alloc_bootmem_low_pages_limit, alloc_bootmem_node_limit,
alloc_bootmem_low_pages_node_limit apis, but alloc_bootmem_low_pages_limit
is the only api used for swiotlb.

The existing alloc_bootmem_low_pages() api could instead have been
changed and made to pass right limit to the core allocator.  But that
would make the patch more intrusive for 2.6.14, as other arches use
alloc_bootmem_low_pages().  We may be done that post 2.6.14 as a
cleanup.

With this, swiotlb gets memory within 4G for both x86_64 and ia64
arches.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In drivers/acpi/glue.c the address of an integer is cast to the address of
an unsigned long.  This breaks on systems where a long is larger than an
int --- for a start the int can be misaligned; for a second the assignment
through the pointer will overwrite part of the next variable.
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Acked-by: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I've gotten a report on lkml, of a possible regression in the MGA DRM in
2.6.14-rc4 (since -rc1), I haven't been able to reproduce it here, but I've
figured out some possible issues in the mga code that were definitely
wrong, some of these are from DRM CVS, the main fix is the agp enable bit
on the old code path still used by everyone.....
Signed-off-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The PF_NOFREEZE process flag should not be inherited when a thread is
forked.  This patch (as585) removes the flag from the child.

This problem is starting to show up more and more as drivers turn to the
kthread API instead of using kernel_thread().  As a result, their kernel
threads are now children of the kthread worker instead of modprobe, and
they inherit the PF_NOFREEZE flag.  This can cause problems during system
suspend; the kernel threads are not getting frozen as they ought to be.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The variable RCS_TAR_IGNORE is used in scripts/packaging/Makefile, but not
exported from the main Makefile, so it's never used.

This results in the rpm targets being very unhappy in quilted trees.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The implementation of __kernel_gettimeofday() in the 32 bits vDSO has a
small bug (a typo actually) that will cause it to lose 1 bit of precision.
Not terribly bad but worth fixing.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The main problem fixes is that in certain situations stopping md arrays may
take longer than you expect, or may require multiple attempts.  This would
only happen when resync/recovery is happening.

This patch fixes three vaguely related bugs.

1/ The recent change to use kthreads got the setting of the
   process name wrong.  This fixes it.
2/ The recent change to use kthreads lost the ability for
   md threads to be signalled with SIG_KILL.  This restores that.
3/ There is a long standing bug in that if:
    - An array needs recovery (onto a hot-spare) and
    - The recovery is being blocked because some other array being
       recovered shares a physical device and
    - The recovery thread is killed with SIG_KILL
   Then the recovery will appear to have completed with no IO being
   done, which can cause data corruption.
   This patch makes sure that incomplete recovery will be treated as
   incomplete.

Note that any kernel affected by bug 2 will not suffer the problem of bug
3, as the signal can never be delivered.  Thus the current 2.6.14-rc
kernels are not susceptible to data corruption.  Note also that if arrays
are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't
occur.  It only happens if a SIGKILL is independently delivered as done by
'init' when shutting down.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Changes all spinlocks that can be held during an irq handler to disable
interrupts while the lock is held.  Changes spin_[un]lock_irq to use the
irqsave/irqrestore variants for robustness and readability.

In raw1394.c:handle_iso_listen(), don't grab host_info_lock at all -- we're
not accessing host_info_list or host_count, and holding this lock while
trying to tasklet_kill the iso tasklet this can cause an ABBA deadlock if
ohci:dma_rcv_tasklet is running and tries to grab host_info_lock in
raw1394.c:receive_iso.  Test program attached reliably deadlocks all SMP
machines I have been able to test without this patch.
Signed-off-by: Andy Wingo <wingo@pobox.com>
Acked-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Brice Goglin <Brice.Goglin@ens-lyon.org> reports a printk storm from this
driver.  Fix.
Acked-by: David Gibson <hermes@gibson.dropbear.id.au>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

hugetlbfs allows truncation of its files (should it?), but hugetlb.c often
forgets that: crashes and misaccounting ensue.

copy_hugetlb_page_range better grab the src page_table_lock since we don't
want to guess what happens if concurrently truncated.  unmap_hugepage_range
rss accounting must not assume the full range was mapped.  follow_hugetlb_page
must guard with page_table_lock and be prepared to exit early.

Restyle copy_hugetlb_page_range with a for loop like the others there.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Oleg Nesterov reported an SMP deadlock.  If there is a running timer
tracking a different process's CPU time clock when the process owning
the timer exits, we deadlock on tasklist_lock in posix_cpu_timer_del via
exit_itimers.

That code was using tasklist_lock to check for a race with __exit_signal
being called on the timer-target task and clearing its ->signal.
However, there is actually no such race.  __exit_signal will have called
posix_cpu_timers_exit and posix_cpu_timers_exit_group before it does
that.  Those will clear those k_itimer's association with the dying
task, so posix_cpu_timer_del will return early and never reach the code
in question.

In addition, posix_cpu_timer_del called from exit_itimers during execve
or directly from timer_delete in the process owning the timer can race
with an exiting timer-target task to cause a double put on timer-target
task struct.  Make sure we always access cpu_timers lists with sighand
lock held.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Patch from Tony Lindgren

Machine restart calls cpu_proc_fin() to clean and disable
cache, and turn off interrupts. This patch adds proper
cpu_v6_proc_fin.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The hugetlb pages are currently pre-faulted.  At the time of mmap of
hugepages, we populate the new PTEs.  It is possible that HW has already
cached some of the unused PTEs internally.  These stale entries never
get a chance to be purged in existing control flow.

This patch extends the check in page fault code for hugepages.  Check if
a faulted address falls with in size for the hugetlb file backing it.
We return VM_FAULT_MINOR for these cases (assuming that the arch
specific page-faulting code purges the stale entry for the archs that
need it).
Signed-off-by: Rohit Seth <rohit.seth@intel.com>

[ This is apparently arguably an ia64 port bug. But the code won't
  hurt, and for now it fixes a real problem on some ia64 machines ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes a couple bugs in the OMAP2 clock management code. Calls to
clk_set_rate() for the root DSS clocks showed a couple bugs.  Testing in
tree's shows this fixes the problems.
Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Make registration work

Move second I2C init on 24xx to mach-omap2/devices.c

included in this FB patch:
- OMAP2 support with overlay, colorkey handling
- the palmte patch posted by Romain Goyet. The palette loading is
  changed a bit, so that it works ok with other platforms as well.
- registering the FB device through plat-omap/devices.c instead of doing
  it from the driver itself. Boards have to specify the OMAP_TAG_LCD
  config in the related board-*.c with in order to have FB support.
- pixel clock divider calculation based on the panel->pixel_clock
  instead of the wired panel->pcd
- support for external controllers both on SOSSI (OMAP1) and
  RFBI (OMAP2), kudos to Juha for this
- removal of the OMAP1 2D gfx stuff, it didn't really improve the
  performance:(
- double buffering IOCTL API, as this can be done in a more standard
  way through FBIOPUT_VSCREENINFO
- update of the affected omap_*_defconfigs
- minor formatting changes and typo fixes

Still TODO:
- OMAP2 Rotation, scaling of video planes
- OMAP2 digit-out (aka tv-out)
- moving the frame buffer to an alternative locating (onchip SRAM)

I tested it with H2 and H4 but it might break on other OMAP1 boards as
there were changes also in the old parts.

The following patch adds a platform device for the OMAP RNG. I have
added support for using this to the RNG driver as part of a generic
RNG codebase I'm writing and will submit that for testing once
it is compiling.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add comment on why omap_gpio_init() is needed on some boards

The early GPIO should only be needed in cases where some interrupts
are routed via FPGA. In most cases doing the init with arch_initcall()
should be fine.

Patch from Paul Schulz

The following trivial patch is to fix what looks like a typo in the PXA register
definitions. The correction comes directly from the definition in the
Intel Documentation.

 http://www.intel.com/design/pca/applicationsprocessors/manuals/278693.htm
 Intel(R) PXA 255 Processor - Developers Manual - Jan 2004 - Page 12-33

Neither 'UDCCS_IO_ROF' or 'UDCCS_IO_DME' are currently used elseware
in the main code (from grep of tree)... The current definitions have been
in the code since at lease 2.4.7.
Signed-off-by: Paul Schulz <paul@mawsonlakes.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>