- 15 May, 2009 15 commits
-
-
Borislav Petkov authored
Add ide_check_ireason() function that handles all ATAPI devices. Reorganize all unlikely cases in ireason checking further down in the code path. In addition, add PFX for printks originating from ide-atapi. Finally, remove ide_cd_check_ireason. Signed-off-by:Borislav Petkov <petkovbb@gmail.com>
-
Borislav Petkov authored
Now that we use a static request_sense buffer, use it instead of the first 18 bytes only. Also, remove sense-arg to cdrom_analyze_sense_data and cdrom_log_sense since we can access it through drive->sense_data now. Signed-off-by: -
Borislav Petkov authored
Now after all users of pc->buf have been converted, remove the 64B buffer embedded in each packet command. There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
ide-tape used to issue READ POSITION in several places and the evaluation of the returned READ POSITION data was done in the ->pc_callback. Convert it to use local buffer and move that evaluation chunk in the idetape_read_position(). Additionally, fold idetape_create_read_position_cmd() into it, too, thus concentrating READ POSITION handling in one method only and making all places call that. Finally, mv {idetape,ide_tape}_read_position. There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
Access the sense buffer through the bio in ->pc_callback method thus alleviating the need for the pc->buf pointer. There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
Pass the buffer into ide_floppy_create_format_unit_cmd instead of using pc->buf. There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
This is in preparation of removing ide_atapi_pc. Expose the buffer as an argument to ide_queue_pc_tail with later replacing it with local buffer or even kmalloc'ed one if needed due to stack usage constraints. Also, add the possibility of passing a NULL-ptr buffer for cmds which don't transfer data besides the cdb. While at it, switch to local buffer in idetape_get_mode_sense_results(). There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
This is in preparation for removing ide_atapi_pc. There should be no functional change resulting from this patch. Signed-off-by: -
Borislav Petkov authored
Now that we have rq->resid_len, use it to account partial completion amount during the lifetime of an rq, decrementing it on each successful transfer. As a result, get rid of now unused pc->xferred. While at it, remove noisy debug call in ide_prep_sense. Signed-off-by: -
Borislav Petkov authored
After the recent struct request cleanups, blk_rq_bytes() is guaranteed to be valid and is the current total length of the rq's bio. Use that instead of pc->req_xfer in the do_request() path after the command has been queued The remaining usage of pc->req_xfer now is only until we map the rq to a bio. While at it: - remove local caching of rq completion length in ide_tape_issue_pc() Signed-off-by: -
Borislav Petkov authored
ide-tape had a potential bug for fs requests when preparing the command packet: it was writing the transfer length as a number of fixed blocks. However, the block layer implies 512 byte blocks and ide-tape can have other block sizes so account for that too. ide-floppy does this calculation properly with the block size factor (floppy->bs_factor). Signed-off-by:
-
- 14 May, 2009 1 commit
-
-
Andrew Morton authored
fs/splice.c: In function 'default_file_splice_read': fs/splice.c:566: warning: 'error' may be used uninitialized in this function which is sort-of true. The code will in fact return -ENOMEM instead of the kernel_readv() return value. Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
- 13 May, 2009 1 commit
-
-
Jens Axboe authored
We cannot reliably map more than one page at the time, or we risk deadlocking. Just allocate the pages from low mem instead. Reported-by:
-
- 12 May, 2009 2 commits
-
-
Jens Axboe authored
Splice is tied to pipes by design, it'll not change. And now that the splice stuff is in splice.h (and note pipe.h), the rest of the comment is out-of-date as well. Signed-off-by: -
Tejun Heo authored
Commit c3a4d78c introduced rq->data_len and converted residual count users to it. While converting, it mistakenly converted scsi_end_request() to finish requests with residual count when it wants to do is fully complete the request. Fix it by using blk_end_request_all() instead. This bug was spotted by Boaz Harrosh. Signed-off-by:
Tejun Heo <tj@kernel.org> Spotted-by:
Boaz Harrosh <bharrosh@panasas.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
- 11 May, 2009 21 commits
-
-
Miklos Szeredi authored
If f_op->splice_write() is not implemented, fall back to a plain write. Use vfs_writev() to write from the pipe buffers. This will allow splice on all filesystems and file types. This includes "direct_io" files in fuse which bypass the page cache. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
If f_op->splice_read() is not implemented, fall back to a plain read. Use vfs_readv() to read into previously allocated pages. This will allow splice and functions using splice, such as the loop device, to work on all filesystems. This includes "direct_io" files in fuse which bypass the page cache. Signed-off-by:
-
Miklos Szeredi authored
Allow splice(2) to work when both the input and the output is a pipe. Based on the impementation of the tee(2) syscall, but instead of duplicating the buffer references move the buffers from the input pipe to the output pipe. Moving the whole buffer only succeeds if the full length of the buffer is spliced. Otherwise duplicate the buffer, just like tee(2), set the length of the output buffer and advance the offset on the input buffer. Since splice is operating on two pipes, special care needs to be taken with locking to prevent AN ABBA deadlock. Again this is done similarly to the tee(2) syscall, first preparing the input and output pipes so there's data to consume and space for that data, and then doing the move operation while holding both locks. If other processes are doing I/O on the same pipes parallel to the splice, then by the time both inodes are locked there might be no buffers left to move, or no space to move them to. In this case retry the whole operation, including the preparation phase. This could lead to starvation, but I'm not sure if that's serious enough to worry about. Signed-off-by:
-
FUJITA Tomonori authored
Let's put the completion related functions back to block/blk-core.c where they have lived. We can also unexport blk_end_bidi_request() and __blk_end_bidi_request(), which nobody uses. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
Let's use blk_end_request_all() instead of blk_end_bidi_request(). Signed-off-by:
-
FUJITA Tomonori authored
blk_end_request_all() and __blk_end_request_all() should finish all bytes including bidi, by definition. That's what all bidi users need , bidi requests must be complete as a whole (partial completion is impossible). Signed-off-by:
-
Tejun Heo authored
Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by:
-
Tejun Heo authored
gdrom already dequeues and fully completes requests on normal path and the error paths can be easily converted to do so too. Clean it up and dequeue requests on error paths too. While at it remove superflous blk_fs_request() && !blk_rq_sectors() condition check. [ Impact: dequeue in-flight request, cleanup ] Signed-off-by:
-
Tejun Heo authored
plat-omap/mailbox, floppy, viocd, mspro_block, i2o_block and mmc/card/queue are already pretty close to dequeueing model and can be converted with simple changes. Convert them. While at it, * xen-blkfront: !fs check moved downwards to share dequeue call with normal path. * mspro_block: __blk_end_request(..., blk_rq_cur_byte()) converted to __blk_end_request_cur() * mmc/card/queue: loop of __blk_end_request() converted to __blk_end_request_all() [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
z2ram processes requests one-by-one synchronously and can be easily converted to dequeueing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
jsflash processes requests one-by-one synchronously from a kthread and can be easily converted to dequeueing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
mtd_blkdevs processes requests one-by-one synchronously from a kthread and can be easily converted to dequeueing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
xd processes requests one-by-one synchronously and can be easily converted to dequeueing model. Convert it. While at it, use rq_cur_bytes instead of rq_bytes when checking for sector overflow. This is for for consistency and better behavior for merged requests. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
swim processes requests one-by-one synchronously and can easily be converted to dequeuing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
Request processing in amiflop is done sequentially in redo_fd_request() proper and redo_fd_request() can easily be converted to track in-flight request. Remove CURRENT, track in-flight request directly and dequeue it when processing starts. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
Other than in issue error paths, ps3disk always completely finishes fetched requests. With full completion on error paths, it can be easily converted to dequeueing model. * After L1 r/w call failure, ps3disk_submit_request_sg() now fails the whole request. Issue failure isn't likely to benefit from partial retry anyway and ps3disk uses full failure in completion error path too, so I don't think this amounts to any meaningful functionality loss. * flush completion is converted to _all for consistency. It doesn't make any functional difference. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
pd/pf/pcd have track in-flight request by pd/pf/pcd_req. They can be converted to dequeueing model by updating fetching and completion paths. Convert them. Note that removal of elv_next_request() call from pf_next_buf() doesn't make any functional difference. The path is traveled only during partial completion of a request and elv_next_request() call must return the same request anyway. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
xsysace already tracks in-flight request using ace->req. Converting to dequeueing model is mostly a matter of adding dequeueing call after request fetching. The only tricky part is handling CF removal which should complete both in flight and on queue requests. Convert to dequeueing model. While at it, remove explicit blk_rq_cur_bytes() and use __blk_end_request_cur() instead. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by:
-
Tejun Heo authored
ataflop has single request in flight. Till now, whenever it needs to access the in-flight request it called elv_next_request(). This patch makes ataflop track the in-flight request directly and dequeue it when processing starts. The added complexity is minimal and this will help future block layer changes. [ Impact: dequeue in-flight request, one elv_next_request() per request ] Signed-off-by:
-
Tejun Heo authored
hd has at most single request in flight. Till now, whenever it needs to access the in-flight request it called elv_next_request(). This patch makes hd track the in-flight request directly and dequeue it when processing starts. The added complexity is minimal and this will help future block layer changes. [ Impact: dequeue in-flight request, one elv_next_request() per request ] Signed-off-by:
-
