- 10 Sep, 2009 29 commits
-
-
Mike Rapoport authored
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Mike Rapoport authored
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Guennadi Liakhovetski authored
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Guennadi Liakhovetski authored
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Guennadi Liakhovetski authored
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Alex Roman authored
This patch configures the MFP pads for UART1, UART2, UART3 for the Toradex Colibri PXA320 module. Previously they were just not configured resulting in just the first UART working because it was the only one that was configured by the bootloader (Toradex EBOOT in our case). This patch is against vanilla 2.6.30 and has been tested with the Toradex Orchid carrier board (all three UARTs were functional). Signed-off-by: Alex Roman <alex.roman@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
NAND feature will be enabled when the appropriate config option is set. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Ribeiro authored
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Robert Jarzmik authored
Several boards use always the same pattern with pxamci : request gpio, request irq for that gpio to detect MMC card insertion, request gpio for read-only mode detection, etc ... Now that pxamci provides platform_data to describe simple gpio management of the MMC external controls, use it. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: rpurdie@rpsys.net Cc: drwyrm@gmail.com Cc: sakoman@gmail.com Cc: marek.vasut@gmail.com Cc: s.hauer@pengutronix.de Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Robert Jarzmik authored
The MMC block needs 3 external datas to work : - is the MMC card put in "read-only mode" ? - is a MMC card inserted or removed ? - enable power towards the MMC card Several platforms provide these controls through gpios. Expand the platform_data to request and use these gpios is set up by board code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Pierre.Ossman <pierre@ossman.eu> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
Cleanup only, no function change. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Robert Jarzmik authored
Add some debug information for PXA DMA : - descriptors queued - channels state - global state -- Since V1: reverted to old register access (no more dma_readl() or dma_writel()). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Robert Jarzmik authored
Reduce loop for dma irq handler callbacks to the minimum required. Since V1: included suggestion from Nicolas Pitre to improve even further the loop. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Robert Jarzmik authored
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig. Since they're similar platform and servicing for same SoC family. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
PXA I2C module is also used in Marvell PXA168 and PXA910 series. Update the module dependancy of PXA I2C. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
For consistency reasons, rename IRQ_GRPHICS to IRQ_GCU. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
Add priority registers and new registers of pxa935. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
CPU id is changed in Marvell chip. So update the code in cpu_is_xsc3(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
PXA93x/950 has additional 64 GPIOs, each is a secondary interrupt source for IRQ_GPIO_2_x, extend PXA_GPIO_IRQ_{BASE,NUM}. PXA93x/950 specific IRQ definitions are added as well. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
Add and initialize the mfp setting of pxa935 chip. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
There is currently an uncovered case for MFP configuration on PXAs which is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN bits. This case is needed to explicitly let pins float, even if the selected alternate function would default to a configuration with a pull resistor enabled. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Haojian Zhuang authored
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Philipp Zabel authored
Its removal was omitted when all its uses were removed in 8c3abc7d... "[ARM] pxa: convert to clkdev and match clocks by struct device where possible" Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
- 09 Sep, 2009 3 commits
-
-
Linus Torvalds authored
-
Ed Cashin authored
Andy Whitcroft reported an oops in aoe triggered by use of an incorrectly initialised request_queue object: [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add an uninitialized object, something is seriously wrong. [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu [ 2645.959107] Call Trace: [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70 [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0 [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160 [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe] The request queue of an aoe device is not used but can be allocated in code that does not sleep. Bruno bisected this regression down to cd43e26f block: Expose stacked device queues in sysfs "This seems to generate /sys/block/$device/queue and its contents for everyone who is using queues, not just for those queues that have a non-NULL queue->request_fn." Addresses http://bugs.launchpad.net/bugs/410198 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942 Note that embedding a queue inside another object has always been an illegal construct, since the queues are reference counted and must persist until the last reference is dropped. So aoe was always buggy in this respect (Jens). Signed-off-by: Ed Cashin <ecashin@coraid.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bruno Premont <bonbons@linux-vserver.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Linus Torvalds authored
Reinette Chatre reports a frozen system (with blinking keyboard LEDs) when switching from graphics mode to the text console, or when suspending (which does the same thing). With netconsole, the oops turned out to be BUG: unable to handle kernel NULL pointer dereference at 0000000000000084 IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915] and it's due to the i915_gem.c code doing drm_irq_uninstall() after having done i915_gem_idle(). And the i915_gem_idle() path will do i915_gem_idle() -> i915_gem_cleanup_ringbuffer() -> i915_gem_cleanup_hws() -> dev_priv->hw_status_page = NULL; but if an i915 interrupt comes in after this stage, it may want to access that hw_status_page, and gets the above NULL pointer dereference. And since the NULL pointer dereference happens from within an interrupt, and with the screen still in graphics mode, the common end result is simply a silently hung machine. Fix it by simply uninstalling the irq handler before idling rather than after. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 08 Sep, 2009 1 commit
-
-
Zhenyu Wang authored
eDP is exclusive connector too, and add missing crtc_mask setting for TV. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14139Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 07 Sep, 2009 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: IMA: update ima_counts_put
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: gianfar: Fix build.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: pcmcia: add CNF-CDROM-ID for ide
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: agp/intel: support for new chip variant of IGDNG mobile drm/i915: Unref old_obj on get_fence_reg() error path drm/i915: increase default latency constant (v2 w/comment)
-
Dave Airlie authored
This adds some rv350+ register for LTE/GTE discard, and enables the rv515 two sided stencil register. It also disables the DEPTHXY_OFFSET register which can be used to workaround the CS checker. Moves rs690 to proper place in rs600 and uses correct table on rs600. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Mimi Zohar authored
- As ima_counts_put() may be called after the inode has been freed, verify that the inode is not NULL, before dereferencing it. - Maintain the IMA file counters in may_open() properly, decrementing any counter increments on subsequent errors. Reported-by: Ciprian Docan <docan@eden.rutgers.edu> Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com Signed-off-by: James Morris <jmorris@namei.org>
-