In future all cpumask ops will only be valid (in general) for bit
numbers < nr_cpu_ids.  So use that instead of NR_CPUS in iterators
and other comparisons.

This is always safe: no cpu number can be >= nr_cpu_ids, and
nr_cpu_ids is initialized to NR_CPUS at boot.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

In drivers/net/wireless/zd1211rw/zd_usb.c the code:

(endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT

is suspicious.  If it is intended to use USB_ENDPOINT_DIR_MASK rather than
USB_TYPE_MASK, then the whole conditional test could be converted to a call
to usb_endpoint_is_bulk_in.

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

cls_cgroup can't be compiled as a module, since it's not supported by
cgroup.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- It's better to use container_of() instead of casting cgroup_subsys_state *
  to cgroup_cls_state *.
- Add helper function task_cls_state().
- Rename net_cls_state() to cgrp_cls_state().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When removing a cgroup, an oops was triggered immediately. The cause
is wrong kfree() in cgrp_destroy().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in drivers/net/eexpress.c:558, function unstick_cu()

while (!SCB_complete(rsst=scb_status(dev))) {
	...
	if (...)
		printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
                                                       dev->name,rsst);
}

but this will become 

while (!((rsst = scb_status(dev) & 0x8000) != 0) ...

because of the macro:

#define SCB_complete(s) ((s&0x8000)!=0)

so rsst can only become either 0x8000 or 0, but in the latter case the
loop ends, I think the wrong timed out status is printed. This also
cleans up similar macros.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now using Ethtool to determine ring sizes, removed the module parameters
that controlled those values.
Modifying ring size requires restart of the interface.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed module parameter specifying number of RX rings
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

Required in cases were dev->caps.num_comp_vectors > MAX_RX_RINGS.
For current values this would happen on machines that have more
then 16 cores.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

Acked-by: Graeme Fowler <graeme@graemef.net>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed duplicated include in drivers/net/arm/ks8695net.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set proper operations.
Signed-off-by: Kusanagi Kouichi <slash@ma.neweb.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During network namespace teardown we either move or delete
all of the network devices associated with a network namespace.
In the case of veth devices deleting one will also delete it's
pair device.  If both devices are in the same network namespace
then for_each_netdev_safe is insufficient as next may point
to the second veth device we have deleted.

To avoid problems I do what we do in __rtnl_kill_links and
restart the scan of the device list, after we have deleted
a device.

Currently dev_change_netnamespace does not appear to suffer from
this problem, but wireless devices are also paired and likely
should be moved between network namespaces together.  So I have
errored on the side of caution and restart the scan of the network
devices in that case as well.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No reason to roll our own here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

I hit similar build failure due to the change in the netif_rx_reschedule()

drivers/net/ehea/ehea_main.c: In function 'ehea_poll':
drivers/net/ehea/ehea_main.c:844: warning: passing argument 1 of 'netif_rx_reschedule' from incompatible pointer type
drivers/net/ehea/ehea_main.c:844: error: too many arguments to function 'netif_rx_reschedule'
make[3]: *** [drivers/net/ehea/ehea_main.o] Error 1

greping through the sources for the changes missed out, we have

./drivers/net/arm/ixp4xx_eth.c:507:							netif_rx_reschedule(dev, napi)) {
./drivers/net/arm/ep93xx_eth.c:310:             if (more && netif_rx_reschedule(dev, napi))
./drivers/net/wan/ixp4xx_hss.c:657:							netif_rx_reschedule(dev, napi)) {
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As reported by Stephen Rothwell:

--------------------
Today's linux-next build (powerpc ppc64_defconfig) produced these new
warnings:

drivers/net/pasemi_mac.c: In function 'pasemi_mac_rx_intr':
drivers/net/pasemi_mac.c:957: warning: unused variable 'dev'
drivers/net/pasemi_mac.c: In function 'pasemi_mac_poll':
drivers/net/pasemi_mac.c:1637: warning: unused variable 'dev'
drivers/net/spider_net.c: In function 'spider_net_poll':
drivers/net/spider_net.c:1280: warning: unused variable 'netdev'

Probably caused by commit 908a7a16 ("net:
Remove unused netdev arg from some NAPI interfaces").
--------------------
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
  powerpc/44x: Support 16K/64K base page sizes on 44x
  powerpc: Force memory size to be a multiple of PAGE_SIZE
  powerpc/32: Wire up the trampoline code for kdump
  powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
  powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
  powerpc/32: Setup OF properties for kdump
  powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
  powerpc: Prepare xmon_save_regs for use with kdump
  powerpc: Remove default kexec/crash_kernel ops assignments
  powerpc: Make default kexec/crash_kernel ops implicit
  powerpc: Setup OF properties for ppc32 kexec
  powerpc/pseries: Fix cpu hotplug
  powerpc: Fix KVM build on ppc440
  powerpc/cell: add QPACE as a separate Cell platform
  powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
  powerpc/mpc5200: fix error paths in PSC UART probe function
  powerpc/mpc5200: add rts/cts handling in PSC UART driver
  powerpc/mpc5200: Make PSC UART driver update serial errors counters
  powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
  powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
  ...

Fix trivial conflict in drivers/char/Makefile as per Paul's directions

Commit 908a7a16 ("net: Remove unused
netdev arg from some NAPI interfaces") missed two spots.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  smackfs: check for allocation failures in smk_set_access()

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
  kbuild: strip generated symbols from *.ko
  kbuild: simplify use of genksyms
  kernel-doc: check for extra kernel-doc notations
  kbuild: add headerdep used to detect inclusion cycles in header files
  kbuild: fix string equality testing in tags.sh
  kbuild: fix make tags/cscope
  kbuild: fix make incompatibility
  kbuild: remove TAR_IGNORE
  setlocalversion: add git-svn support
  setlocalversion: print correct subversion revision
  scripts: improve the decodecode script
  scripts/package: allow custom options to rpm
  genksyms: allow to ignore symbol checksum changes
  genksyms: track symbol checksum changes
  tags and cscope support really belongs in a shell script
  kconfig: fix options to check-lxdialog.sh
  kbuild: gen_init_cpio expands shell variables in file names
  remove bashisms from scripts/extract-ikconfig
  kbuild: teach mkmakfile to be silent
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-nvram:
  [PATCH] nvram - convert PRINT_PROC to seq_file
  [PATCH] nvram - CodingStyle

This adds support for 16k and 64k page sizes on PowerPC 44x processors.

The PGDIR table is much smaller than a page when using 16k or 64k
pages (512 and 32 bytes respectively) so we allocate the PGDIR with
kzalloc() instead of __get_free_pages().

One PTE table covers rather a large memory area when using 16k or 64k
pages (32MB or 512MB respectively), so we can easily put FIXMAP and
PKMAP in the area covered by one PTE table.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Ensure that total memory size is page-aligned, because otherwise
mark_bootmem() gets upset.

This error case was triggered by using 64 KiB pages in the kernel
while arch/powerpc/boot/4xx.c arbitrarily reduced the amount of memory
by 4096 (to work around a chip bug that affects the last 256 bytes of
physical memory).
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: use the new byteorder headers
  fbcon: Protect free_irq() by MACH_IS_ATARI check
  fbcon: remove broken mac vbl handler
  m68k: fix trigraph ignored warning in setox.S
  macfb annotations and compiler warning fix
  m68k: mac baboon interrupt enable/disable
  m68k: machw.h cleanup
  m68k: Mac via cleanup and commentry
  m68k: Reinstate mac rtc

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (31 commits)
  [CIFS] Remove redundant test
  [CIFS] make sure that DFS pathnames are properly formed
  Remove an already-checked error condition in SendReceiveBlockingLock
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  [CIFS] Streamline SendReceive[2] by using "goto out:" in an error condition
  Slightly streamline SendReceive[2]
  Check the return value of cifs_sign_smb[2]
  [CIFS] Cleanup: Move the check for too large R/W requests
  [CIFS] Slightly simplify wait_for_free_request(), remove an unnecessary "else" branch
  Simplify allocate_mid() slightly: Remove some unnecessary "else" branches
  [CIFS] In SendReceive, move consistency check out of the mutexed region
  cifs: store password in tcon
  cifs: have calc_lanman_hash take more granular args
  cifs: zero out session password before freeing it
  cifs: fix wait_for_response to time out sleeping processes correctly
  [CIFS] Can not mount with prefixpath if root directory of share is inaccessible
  [CIFS] various minor cleanups pointed out by checkpatch script
  [CIFS] fix typo
  [CIFS] remove sparse warning
  ...

Fix trivial conflict in fs/cifs/cifs_fs_sb.h due to comment changes for
the CIFS_MOUNT_xyz bit definitions between cifs updates and security
updates.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits)
  IB/mlx4: Set ownership bit correctly when copying CQEs during CQ resize
  RDMA/nes: Remove tx_free_list
  RDMA/cma: Add IPv6 support
  RDMA/addr: Add support for translating IPv6 addresses
  mlx4_core: Delete incorrect comment
  mlx4_core: Add support for multiple completion event vectors
  IB/iser: Avoid recv buffer exhaustion caused by unexpected PDUs
  IB/ehca: Remove redundant test of vpage
  IB/ehca: Replace modulus operations in flush error completion path
  IB/ipath: Add locking for interrupt use of ipath_pd contexts vs free
  IB/ipath: Fix spi_pioindex value
  IB/ipath: Only do 1X workaround on rev1 chips
  IB/ipath: Don't count IB symbol and link errors unless link is UP
  IB/ipath: Check return value of dma_map_single()
  IB/ipath: Fix PSN of send WQEs after an RDMA read resend
  RDMA/nes: Cleanup warnings
  RDMA/nes: Add loopback check to make_cm_node()
  RDMA/nes: Check cqp_avail_reqs is empty after locking the list
  RDMA/nes: Fix TCP compliance test failures
  RDMA/nes: Forward packets for a new connection with stale APBVT entry
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (85 commits)
  [S390] provide documentation for hvc_iucv kernel parameter.
  [S390] convert ctcm printks to dev_xxx and pr_xxx macros.
  [S390] convert zfcp printks to pr_xxx macros.
  [S390] convert vmlogrdr printks to pr_xxx macros.
  [S390] convert zfcp dumper printks to pr_xxx macros.
  [S390] convert cpu related printks to pr_xxx macros.
  [S390] convert qeth printks to dev_xxx and pr_xxx macros.
  [S390] convert sclp printks to pr_xxx macros.
  [S390] convert iucv printks to dev_xxx and pr_xxx macros.
  [S390] convert ap_bus printks to pr_xxx macros.
  [S390] convert dcssblk and extmem printks messages to pr_xxx macros.
  [S390] convert monwriter printks to pr_xxx macros.
  [S390] convert s390 debug feature printks to pr_xxx macros.
  [S390] convert monreader printks to pr_xxx macros.
  [S390] convert appldata printks to pr_xxx macros.
  [S390] convert setup printks to pr_xxx macros.
  [S390] convert hypfs printks to pr_xxx macros.
  [S390] convert time printks to pr_xxx macros.
  [S390] convert cpacf printks to pr_xxx macros.
  [S390] convert cio printks to pr_xxx macros.
  ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  sched: fix warning in fs/proc/base.c
  schedstat: consolidate per-task cpu runtime stats
  sched: use RCU variant of list traversal in for_each_leaf_rt_rq()
  sched, cpuacct: export percpu cpuacct cgroup stats
  sched, cpuacct: refactoring cpuusage_read / cpuusage_write
  sched: optimize update_curr()
  sched: fix wakeup preemption clock
  sched: add missing arch_update_cpu_topology() call
  sched: let arch_update_cpu_topology indicate if topology changed
  sched: idle_balance() does not call load_balance_newidle()
  sched: fix sd_parent_degenerate on non-numa smp machine
  sched: add uid information to sched_debug for CONFIG_USER_SCHED
  sched: move double_unlock_balance() higher
  sched: update comment for move_task_off_dead_cpu
  sched: fix inconsistency when redistribute per-cpu tg->cfs_rq shares
  sched/rt: removed unneeded defintion
  sched: add hierarchical accounting to cpu accounting controller
  sched: include group statistics in /proc/sched_debug
  sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER
  sched: clean up SCHED_CPUMASK_ALLOC
  ...

Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
  sched, trace: update trace_sched_wakeup()
  tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
  Revert "x86: disable X86_PTRACE_BTS"
  ring-buffer: prevent false positive warning
  ring-buffer: fix dangling commit race
  ftrace: enable format arguments checking
  x86, bts: memory accounting
  x86, bts: add fork and exit handling
  ftrace: introduce tracing_reset_online_cpus() helper
  tracing: fix warnings in kernel/trace/trace_sched_switch.c
  tracing: fix warning in kernel/trace/trace.c
  tracing/ring-buffer: remove unused ring_buffer size
  trace: fix task state printout
  ftrace: add not to regex on filtering functions
  trace: better use of stack_trace_enabled for boot up code
  trace: add a way to enable or disable the stack tracer
  x86: entry_64 - introduce FTRACE_ frame macro v2
  tracing/ftrace: add the printk-msg-only option
  tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
  x86, bts: correctly report invalid bts records
  ...

Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.

Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (246 commits)
  x86: traps.c replace #if CONFIG_X86_32 with #ifdef CONFIG_X86_32
  x86: PAT: fix address types in track_pfn_vma_new()
  x86: prioritize the FPU traps for the error code
  x86: PAT: pfnmap documentation update changes
  x86: PAT: move track untrack pfnmap stubs to asm-generic
  x86: PAT: remove follow_pfnmap_pte in favor of follow_phys
  x86: PAT: modify follow_phys to return phys_addr prot and return value
  x86: PAT: clarify is_linear_pfn_mapping() interface
  x86: ia32_signal: remove unnecessary declaration
  x86: common.c boot_cpu_stack and boot_exception_stacks should be static
  x86: fix intel x86_64 llc_shared_map/cpu_llc_id anomolies
  x86: fix warning in arch/x86/kernel/microcode_amd.c
  x86: ia32.h: remove unused struct sigfram32 and rt_sigframe32
  x86: asm-offset_64: use rt_sigframe_ia32
  x86: sigframe.h: include headers for dependency
  x86: traps.c declare functions before they get used
  x86: PAT: update documentation to cover pgprot and remap_pfn related changes - v3
  x86: PAT: add pgprot_writecombine() interface for drivers - v3
  x86: PAT: change pgprot_noncached to uc_minus instead of strong uc - v3
  x86: PAT: implement track/untrack of pfnmap regions for x86 - v3
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (105 commits)
  SELinux: don't check permissions for kernel mounts
  security: pass mount flags to security_sb_kern_mount()
  SELinux: correctly detect proc filesystems of the form "proc/foo"
  Audit: Log TIOCSTI
  user namespaces: document CFS behavior
  user namespaces: require cap_set{ug}id for CLONE_NEWUSER
  user namespaces: let user_ns be cloned with fairsched
  CRED: fix sparse warnings
  User namespaces: use the current_user_ns() macro
  User namespaces: set of cleanups (v2)
  nfsctl: add headers for credentials
  coda: fix creds reference
  capabilities: define get_vfs_caps_from_disk when file caps are not enabled
  CRED: Allow kernel services to override LSM settings for task actions
  CRED: Add a kernel_service object class to SELinux
  CRED: Differentiate objective and effective subjective credentials on a task
  CRED: Documentation
  CRED: Use creds in file structs
  CRED: Prettify commoncap.c
  CRED: Make execve() take advantage of copy-on-write credentials
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (57 commits)
  crypto: aes - Precompute tables
  crypto: talitos - Ack done interrupt in isr instead of tasklet
  crypto: testmgr - Correct comment about deflate parameters
  crypto: salsa20 - Remove private wrappers around various operations
  crypto: des3_ede - permit weak keys unless REQ_WEAK_KEY set
  crypto: sha512 - Switch to shash 
  crypto: sha512 - Move message schedule W[80] to static percpu area
  crypto: michael_mic - Switch to shash
  crypto: wp512 - Switch to shash
  crypto: tgr192 - Switch to shash
  crypto: sha256 - Switch to shash
  crypto: md5 - Switch to shash
  crypto: md4 - Switch to shash
  crypto: sha1 - Switch to shash
  crypto: rmd320 - Switch to shash
  crypto: rmd256 - Switch to shash
  crypto: rmd160 - Switch to shash
  crypto: rmd128 - Switch to shash
  crypto: null - Switch to shash
  crypto: hash - Make setkey optional
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (367 commits)
  ALSA: ASoC: fix a typo in omp-pcm.c
  ASoC: Fix DSP formats in SSM2602 audio codec
  ASoC: Fix incorrect DSP format in OMAP McBSP DAI and affected drivers
  ALSA: hda: fix incorrect mixer index values for 92hd83xx
  ALSA: hda: dinput_mux check
  ALSA: hda - Add quirk for another HP dv7
  ALSA: ASoC - Add missing __devexit annotation to wm8350.c
  ALSA: ASoc: DaVinci: davinci-evm use dsp_b mode
  ALSA: ASoC: DaVinci: i2s, evm, pass same value to codec and cpu_dai
  ALSA: ASoC: tlv320aic3x add dsp_a
  ALSA: ASoC: DaVinci: document I2S limitations
  ALSA: ASoC: DaVinci: davinci-i2s clean up
  ALSA: ASoC: DaVinci: davinci-i2s clean up
  ALSA: ASoC: DaVinci: davinci-i2s add comments to explain polarity
  ALSA: ASoC: DaVinci: davinvi-evm, make requests explicit
  ALSA: ca0106 - disable 44.1kHz capture
  ALSA: ca0106 - Add missing card->private_data initialization
  ALSA: ca0106 - Check ac97 availability at PM
  ALSA: hda - Power up always when no jack detection is available
  ALSA: hda - Fix unused variable warnings in patch_sigmatel.c
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (132 commits)
  sh: oprofile: Fix up the module build.
  sh: add UIO support for JPU on SH7722.
  serial: sh-sci: Fix up port pinmux for SH7366.
  sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
  sh: mach-sh03: Fix up pata_platform build breakage.
  sh: enable deferred io LCDC on Migo-R
  video: sh_mobile_lcdcfb deferred io support
  video: deferred io with physically contiguous memory
  video: deferred io cleanup
  video: fix deferred io fsync()
  sh: add LCDC interrupt configuration to AP325 and Migo-R
  sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB
  sh: split coherent pages
  sh: dma: Kill off ISA DMA wrapper.
  sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
  sh: Kill off the unused SH_ALPHANUMERIC debug option.
  sh: Enable skipping of bss on debug platforms for sh32 also.
  doc: Update sh cpufreq documentation.
  sh: mrshpc_setup_windows() needs to be inline.
  serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
  ...

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Add missing check for Atari in free_irq() call, which could cause problems on
multi-platform m68k kernels.
Reported-by: Brad Boyer <flar@allandria.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>