Skip to content

L
linux-davinci
Switch branch/tag
  1. 25 Sep, 2009 1 commit
  3. 29 Jul, 2009 1 commit
  5. 25 Sep, 2009 1 commit
  7. 11 Nov, 2009 1 commit
  9. 17 Sep, 2009 1 commit
  11. 16 Oct, 2009 1 commit
    • Stephen Boyd's avatar
      dmar_ir_support() references dmar_tbl which is annotated with · c38a8607
      Stephen Boyd authored 
      __initdata. The only caller of dmar_ir_support() is
intr_remapping_supported() also annotated with __init.

WARNING: drivers/pci/built-in.o(.text+0xa110): Section mismatch in
reference from the function dmar_ir_support() to the variable
.init.data:dmar_tbl
The function dmar_ir_support() references
the variable __initdata dmar_tbl.
This is often because dmar_ir_support lacks a __initdata
annotation or the annotation of dmar_tbl is wrong.
Signed-off-by: default avatarStephen Boyd <bebarino@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      c38a8607
  13. 14 Nov, 2009 1 commit
    • Dick Hollenbeck's avatar
      When controlling an industrial radio modem it can be necessary to · 4f36dc27
      Dick Hollenbeck authored 
      manipulate the handshake lines in order to control the radio modem's
transmitter, from userspace.

The transmitter should not be turned off before all characters have been
transmitted.  serial8250_tx_empty() was reporting that all characters were
transmitted before they actually were.

===

Discovered in parallel with more testing and analysis by Kees Schoenmakers
as follows:

I ran into an NetMos 9835 serial pci board which behaves a little
different than the standard.  This type of expansion board is very common.

"Standard" 8250 compatible devices clear the 'UART_LST_TEMT" bit together
with the "UART_LSR_THRE" bit when writing data to the device.

The NetMos device does it slightly different

I believe that the TEMT bit is coupled to the shift register.  The problem
is that after writing data to the device and very quickly after that one
does call serial8250_tx_empty, it returns the wrong information.

My patch makes the test more robust (and solves the problem) and it does
not affect the already correct devices.


Alan:

  We may yet need to quirk this but now we know which chips we have a
  way to do that should we find this breaks some other 8250 clone with
  dodgy THRE.
Signed-off-by: default avatarDick Hollenbeck <dick@softplc.com>
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Cc: Kees Schoenmakers <k.schoenmakers@sigmae.nl>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      4f36dc27
  15. 12 Nov, 2009 3 commits
  17. 11 Nov, 2009 2 commits
  19. 30 Sep, 2009 1 commit
    • sonic zhang's avatar
      Fit blackfin uart over sport driver into common uart inftrastructure. It · 195fd228
      sonic zhang authored 
      is based on the early platform interfaces to get the platform data early
when the console is initilized.

1. Enable sport uart driver to change uart baud, data bit, stop bit at
   runtime.  Bind the index of uart device nodes to physical index of
   sports.

2. Move all platform data into arch specific board files.  Register
   and probe platform device data in both early and normal stages.

3. Console is registered in sport uart driver as well.

4. Remove 500 us block waiting in sport tx stop code by putting a
   dummy data into tx fifo to make sure the sport tx stops when all bytes
   are shifted out except for the dummy data.

5. clean up a bit and fix up coding style.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      195fd228
  21. 17 Sep, 2009 1 commit
  23. 25 Sep, 2009 1 commit
    • Lamarque Vieira Souza's avatar
      Work around one problem with my Acer Bluetooth Optical Rechargeable Mouse · f4ab3880
      Lamarque Vieira Souza authored 
      where the cursor gets stuck at screen's upper-left corner.

Even my notebook's touchpad is not able to move cursor when the bluetooth
mouse is connected to my Acer Ferrari 4005 notebook.

Using input session instead of hid session solves this problem although
the cursor still moves a little sluggishly with the bluetooth mouse,
cursor moves correctly using the touchpad.

My bluetooth mouse used to work well (no sluggish) until kernel 2.6.21,
since then the problems are getting worse with each kernel release (it got
sluggish in 2.6.22 and this this upper-left corner problem appeared in
2.6.28 or 2.6.27).

The patch adds a general quirk handling framework to the HIDP core and
then uses this framework to implement a quirk for this device.

[akpm@linux-foundation.org: use ARRAY_SIZE()-based search]
Signed-off-by: default avatarLamarque V. Souza <lamarque@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      f4ab3880
  25. 11 Nov, 2009 1 commit
  27. 16 Nov, 2009 1 commit
  29. 12 Nov, 2009 1 commit
  31. 17 Nov, 2009 1 commit
  33. 12 Nov, 2009 1 commit
  35. 20 Aug, 2009 1 commit
    • Sudhakar Rajashekhara's avatar
      Implement memory accessor interface in the MTD layer which enables the · 7e3fac90
      Sudhakar Rajashekhara authored 
      kernel to access flash data.

This patch adds two new members to the mtd_partition structure, a function
handler which will be called during setup of the partition and an argument
to be passed to this setup function.

Example:
+static struct mtd_partition spi_flash_partitions[] = {
+       [0] = {
+               .name       = "U-Boot",
+               .offset     = 0,
+               .size       = SZ_256K,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       [1] = {
+               .name       = "U-Boot Environment",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_64K,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       [2] = {
+               .name       = "Linux",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_7M,
+               .mask_flags = 0,
+       },
+       [3] = {
+               .name       = "MAC Address",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_64K,
+               .mask_flags = 0,
+               .setup      = davinci_get_mac_addr,
+               .context    = (void *)0,
+       },
+};

The davinci_get_mac_addr function reads the MAC address from
offset ZERO of last MTD partition.
Signed-off-by: default avatarSudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      7e3fac90
  37. 10 Nov, 2009 1 commit
  39. 16 Nov, 2009 1 commit
  41. 14 Oct, 2009 1 commit
    • Roland McGrath's avatar
      This adds CROSS_COMPILE as a kconfig string so you can store it in · 49dd91f6
      Roland McGrath authored 
      .config.  Then you can use plain "make" in the configured kernel build
directory to do the right cross compilation without setting the
command-line or environment variable every time.

With this, you can set up different build directories for different kernel
configurations, whether native or cross-builds, and then use the simple:

	make -C /build/dir M=module-source-dir

idiom to build modules for any given target kernel, indicating which one
by nothing but the build directory chosen.

I tried a version that defaults the string with env="CROSS_COMPILE" so
that in a "make oldconfig" with CROSS_COMPILE in the environment you can
just hit return to store the way you're building it.  But the kconfig
prompt for strings doesn't give you any way to say you want an empty
string instead of the default, so I punted that.
Signed-off-by: default avatarRoland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      49dd91f6
  43. 05 Sep, 2009 1 commit
  45. 11 Nov, 2009 1 commit
  47. 13 Oct, 2009 1 commit
  49. 11 Nov, 2009 1 commit
    • Henrik Rydberg's avatar
      With the recent system-wide improvements on suspend/resume and EFI booting · 300837ee
      Henrik Rydberg authored 
      the suspend_resume method of the bcm5974 has broken.  When waking up from
the S3 state on the MacBookAir, the trackpad is found in a yet unknown
state, unable to switch to the proper multitouch mode.  The result is a
frozen touchpad, and a flood of errors of the kind

bcm5974: bad trackpad package, length: 8.

This patch retracts the reset_resume method altogether, falling back on
the generic unbind/rebind functionality of the usb layer until further
investigations can be made as how to reset the device when booting from
efi.
Signed-off-by: default avatarHenrik Rydberg <rydberg@euromail.se>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      300837ee
  51. 29 Sep, 2009 1 commit
  53. 03 Nov, 2009 2 commits
  55. 18 Sep, 2009 1 commit
  57. 02 Sep, 2009 1 commit
  59. 17 Nov, 2009 1 commit
  61. 12 Nov, 2009 1 commit
  63. 03 Nov, 2009 1 commit
    • Julia Lawall's avatar
      In quickcam_messenger.c, if the NULL test on uvd is needed, then the · 0a6690a3
      Julia Lawall authored 
      dereference should be after the NULL test.

In vpif_display.c, std_info is initialized to the address of a structure
field.  This seems unlikely to be NULL.  If it could somehow be NULL, then
the assignment should be moved after the NULL test.  Alternatively, perhaps
the NULL test is intended to test std_info->stdid rather than std_info?

In saa7134-alsa.c, the function is only called from one place, where the
chip argument has already been dereferenced.  On the other hand, if it
should be kept, then card should be initialized after it.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: default avatarJulia Lawall <julia@diku.dk>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      0a6690a3
  65. 13 Oct, 2009 2 commits
    • Alexander Strakh's avatar
      In driver ./drivers/media/video/usbvideo/quickcam_messenger.c in line 91: · 21c6fdeb
      Alexander Strakh authored 
        91         usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));

After this line we use strncat:

  92         strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));

where sizeof(cam->input_physname) returns length of cam->input_phisname
without length for null-symbol.  But this parameter must be - "maximum
numbers of bytes to copy", i.e.:
sizeof(cam->input_physname)-strlen(cam->input_physname)-1.

In this case, after call to usb_make_path the similar drivers use strlcat.

Like in: drivers/hid/usbhid/hid-core.c:
1152         usb_make_path(dev, hid->phys, sizeof(hid->phys));
1153         strlcat(hid->phys, "/input", sizeof(hid->phys));

Found by Linux Driver Verification Project.

Use strlcat instead of strncat.
Signed-off-by: default avatarAlexander Strakh <strakh@ispras.ru>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      21c6fdeb
    • Alexander Strakh's avatar
      In driver ./drivers/media/video/usbvideo/konicawc.c in line 227: · cfd90dbc
      Alexander Strakh authored 
      227         usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));

After this line we use strncat:

228         strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));

where sizeof(cam->input_physname) returns length of cam->input_phisname
without length for null-symbol.  But this parameter must be - "maximum
numbers of bytes to copy", i.e.:
sizeof(cam->input_physname)-strlen(cam->input_physname)-1.

In this case, after call to usb_make_path the similar drivers use strlcat.

Like in drivers/hid/usbhid/hid-core.c:
1152         usb_make_path(dev, hid->phys, sizeof(hid->phys));
1153         strlcat(hid->phys, "/input", sizeof(hid->phys));

Found by Linux Driver Verification Project.

Use strlcat instead of strncat.
Signed-off-by: default avatarAlexander Strakh <strakh@ispras.ru>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      cfd90dbc
  67. 10 Nov, 2009 2 commits