1. 20 Sep, 2006 2 commits
  2. 18 Sep, 2006 3 commits
  3. 14 Sep, 2006 4 commits
    • David Brownell's avatar
      MUSB: More TUSB OTG support · e3071039
      David Brownell authored
      Add more host/OTG functionality.
      
      New Features:
         -	Cable based role switching (using the ID pin) mostly works.  This gives
      	much of the end-user value for USB OTG; there's also dynamic role
      	switching (using special HNP protocol with another OTG device), which
      	surely won't work yet.
         -	Root can write 0/N to /sys/module/musb_hdrc/parameters/musb_otg to
         	disable OTG functionality, forcing B-Default mode (with optional SRP
      	support, but without 8mA current limits) when it's set.  Change this
      	before the gadget driver initializes (e.g. before "modprobe").
      
      Bugfixes:
         -	Fix many OTG mode startup glitches, notably for the root hub.
         -	Add workaround for "issue 4".
      
      Cleanups:
         -	Remove more mode-specific #ifdeffery
         -	ReMoveSomeCamelCasing
         -	Quieter startup
         -	Quash another Kconfig rebellion
         -	Add missing bit declaration
         -	Tersify TUSB irq messages
      
      Open Issues:
         -	Nothing passes remote wakeup down to root hub (unchanged)
         -	Strange VBUS errors (unchanged; workaround: use hub modified for
      	N770, providing 5V supply till TUSB board does so reliably);
         -	Plug in/out as peripheral many times; fine.  As host (with modified
      	hub), ditto.  Now peripheral again ... fails.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      e3071039
    • David Brownell's avatar
      MUSB: TUSB OTG enumeration support · 89c57744
      David Brownell authored
      This gives TUSB host side enumeration support for low speed devices (like
      USB mice), through a Mini-A connector that's not removed ... basically, a
      non-OTG configuration, with the ID pin always grounded.
      
      Basically it punts the "turn VBUS power on/off" to board-specific logic,
      and implements it for TUSB using software switching (rather than having
      the controller do it).
      
      There are various issues, notably
      
          (a)	remote wakeup not getting passed to the root hub then down
      	to the device (mouse) that issued the wakeup;
      
          (b)	strange "vbus error" reports on device connection if nothing
          	is hooked up at driver initialization; and
      
          (c) full or high speed devices see spurious disconnect events
      	right after they've been reset (hw bug?);
      
      Includes various small cleanups too, notably starting to obey the OTG
      state machine and use the OTG timer.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      89c57744
    • Juha Yrjola's avatar
      ARM: OMAP: OMAP2 dmtimer power management support · 9c3d91f8
      Juha Yrjola authored
      GPT1 will be set into non-posted mode, and the wakeup register
      is set for all timers.
      Signed-off-by: default avatarJuha Yrjola <juha.yrjola@solidboot.com>
      9c3d91f8
    • Imre Deak's avatar
      ARM: OMAP2: fb: clock refcounting for dynamic sleep mode · 829702a4
      Imre Deak authored
      Hold reference counts on related clocks only for the duration when they
      are needed, so that dynamic sleep logic can enter the most ideal power
      state.
      Signed-off-by: default avatarImre Deak <imre.deak@solidboot.com>
      Signed-off-by: default avatarJuha Yrjola <juha.yrjola@solidboot.com>
      829702a4
  4. 13 Sep, 2006 9 commits
  5. 12 Sep, 2006 12 commits
  6. 11 Sep, 2006 10 commits