- 23 Sep, 2006 40 commits
-
-
Takashi Iwai authored
Added the dB information to ESS Solo (es1938) driver. The new compound dB range TLVs are used for non-linear native volume controls. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added the definition of TLV dB range compound. It contains one or more dB-range or linear-volume TLV entries with min/max ranges. Used for volume controls with non-linear curves. Signed-off-by:
-
Takashi Iwai authored
Fixed the auto-updating of firmware if the breakout box was switched off/on. The firmware binary itself was already cached but it wasn't loaded properly. Also, request_firmware() is issued if the box was with firmware at module loading time but later it's erased. The auto-update is triggered at each PCM action (open, prepare, etc) and at opening proc files. Signed-off-by:
-
Krzysztof Helt authored
The dbri driver hangs when used in kernel compiled with SMP support due to inproper locking. The patch fixes it. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Ville Syrjala authored
Fix maestro2 hardware volume control. Tested on a Dell Inspiron 7000. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Signed-off-by:
-
Ville Syrjala authored
AD1819 volume registers can hold extra bits which do not affect the actual volume. Add a res_table to the codec patch to fix the problem. PCM, line and mic volume were tested. Signed-off-by:
-
Tobin Davis authored
This patch renames the 965_2112 function ids to 965_3ST, and adds functional support for 965_5ST (5 stack 7.1 surround). Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to mixart driver. Signed-off-by:
-
Andreas Schwab authored
When booting with line out or headphone plugged, you won't hear anything. The problem is that after reset all channels are muted, but the actual value of the gpio port doesn't exactly match the active_val settings as expected by check_audio_gpio. For example, the line_mute port is set to 7, but check_audio_gpio would expect 0xd or 0xf, thus its return value indicates that it is not active, even though it is. AFAICS only looking at the low bit is enough to determine whether the port is active. Signed-off-by:
Andreas Schwab <schwab@suse.de> Signed-off-by:
-
Pavel Machek authored
Cleanup whitespace. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Takashi Iwai authored
Removed volatile from the position buffer pointer. Also, use synchronize_irq() instead of unreliable msleep(1) in the driver remove callback. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to each board support code of ice1724 driver. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information for native digital volumes of ice1712 driver. Signed-off-by:
-
Takashi Iwai authored
- Clean up the code in AK4xxx-ADDA i2c code. - Fix capture gain controls for AK5365 - Changed the static table for DAC/ADC mixer labels to use structs - Implemented TLV entries for each AK codec The volumes in AK4524, AK4528 and AK5365 are corrected with a table to be suitable for dB conversion. Signed-off-by:
-
Takashi Iwai authored
Added the missing dB scale information for Mic volume to vxpocket driver. Signed-off-by:
-
Luke Ross authored
There's at least one USB audio chipset out there which supports only one non-standard rate (ID 0e6a:0310 supports 46875Hz). There's a few other patches for this card which are unsatisfactory because they attempt to map this rate to 44.1k leading to sound distortion. The patch below uses SNDRV_PCM_RATE_KNOT to properly support the non-standard rates where they are available. Signed-off-by:
Luke Ross <luke@lukeross.name> Signed-off-by:
-
Andrey Liakhovets authored
Fix the bad sound quality on VIA EPIA system using VIA VT1617A (ALSA bug#2381). Signed-off-by:
Andrey Liakhovets <liakh@dol.ru> Signed-off-by:
-
Takashi Iwai authored
Added the linear volume TLV entries for YMFPCI native volume controls. Signed-off-by:
-
Takashi Iwai authored
Added the definition of linear volume TLV type. Some DSP chips and codecs (e.g. AK codec) use linear volume control. Signed-off-by:
-
Krzysztof Helt authored
This patch removes setting of incorrect stop_threshold value inside the driver. After the change, playback through the OSS layer works correctly. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes time slot leak in the dbri driver. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes sound recording after the driver convertion to ring buffered version. It also contains small clean ups to the driver. Signed-off-by:
-
Takashi Iwai authored
Force to choose model=ref for some Dell laptops with STAC9200 codec chip for fixing the silent mic recording problem (possibly due to a BIOS bug). Reference: ALSA bug#2038 So far, applied to Inspiron 630m, Latitude D620 and 120L. Signed-off-by:
-
Takashi Iwai authored
Retrun error to user TLV_READ ioctl if no TLV is defined. (Until now, nothing was written and rerunred successfully.) Signed-off-by:
-
Takashi Iwai authored
Fixed the errors at checking info.access field during user TLV_WRITE call. It should have been zero-initialized. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to vxpocket and vx222 drivers. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to pcxhr driver. Signed-off-by:
-
Jochen Voss authored
Fix volume control for the AK4358 DAC. The attenuation control registers of the AK4358 use only 7bit for the volume, the msb is used to enable attenuation output. Without this patch there are 256 volume levels the lower 128 of which are mute. Signed-off-by:
Jochen Voss <voss@seehuhn.de> Signed-off-by:
-
Takashi Iwai authored
Fixed the mic capture with generic parser of hda-codec driver - Use VREF80 for mic pins if available - Handle multiple inputs correctly on audio-input widget node. Confirmed on a conexant codec chip. Signed-off-by:
-
Richard Fish authored
This patch restores the Intel HDA Sigmatel codec pin configuration on resume. Most of it is dedicated to saving the BIOS pin configuration if necessary, so that even unrecognized chips can be resumed correctly. Signed-off-by:
Richard Fish <bigfish@asmallpond.org> Signed-off-by:
-
Guillaume Munch authored
- AR11M and AR11S uses the same chip hence we claim to support the AR Series. - Added commentary about STAC9225s which shares the same id as CXD9872RD. - Added entry for 7662 but won't work automatically until pci_subdevice is known. - 'vaio' model now corresponds to CXD9872RD_VAIO for backward compat. - Replaced STAC766x_VAIO with CXD9872RD_VAIO, STAC9872AK_VAIO, STAC9872K_VAIO and CXD9872AKD_VAIO - Added 'vaio-ar' model for potential future modifications. Signed-off-by:
Guillaume Munch <diabo@free.fr> Signed-off-by:
-
Magnus Sandin authored
The attached patch will force building the S/PDIF controls on the PCU SSID for Asus P5P800-VM motherboard, even if the AC97_EI_SPDIF bit is not set. Signed-off-by:
Magnus Sandin <magnus@sandin.cx> Signed-off-by:
-
Vladimir Avdonin authored
Patch enables the internal speaker on acer laptops with ALC883. Signed-off-by:
Vladimir Avdonin <vldmrrr@yahoo.com> Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to opl3sa2 driver. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to ad1848 driver. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to ad1816a driver. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to dummy driver. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to trident driver. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to fm801 driver. Signed-off-by:
-
Takashi Iwai authored
Added the dB scale information to cs4281 driver. Signed-off-by:
-
