Adds NOR and NAND drivers for OMAP.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for OMAP framebuffer.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds omap kernel version to Makefile and forces CROSS_COMPILE.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Allows booting from USB drive.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds documentation for OMAP.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP needs I2C early during boot.
Signed-off-by: Tony Lindgren <tony@atomide.com>

JFFS2 fixes.
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Makes low-level printk work.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds defconfigs.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Linker compile fix for gcc-3.3.4.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds function to get clock usecount.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Include device header for dma-mapping.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Boots 730 without a bootloader
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for running 32KHz timer at 100HZ using modulo code.

Signed-off-by: Tuukka Tikkanen <>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for integrated DSP on OMAP processors.
Signed-off-by: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Boots 730 without bootloader.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for GPIO switch
Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for boot reason.
Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for board specific tag ATAG_BOARD.
Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds support for OMAP dual mode timer.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enables dynamic tick timer for OMAP.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adds ARM generic support for dynamic tick timer.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Adds cpufreq support for OMAP.
Does not yet include changing memory timings.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates to low-level USB initialization.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. PM updates to make deep sleep work.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Improves the locking for pin multiplexing.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Fixes for clock framework,
DSP related updates, and optional polling read and write.

DSP updates by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
Polling read and write by Nishant Menon <x0nishan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Adds wake-up functionality to GPIO interrupts.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates DMA code to check for active
LCD transfers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates clock framework to reset unused clocks
with a late_initcall.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Splits OMAP1 specific low-level init file
common.c into smaller files, and moves them into omap1 subdirectory.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Moves OMAP1 specific board files
to omap1 subdirectory.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Moves OMAP1 specific core files, such
as irq.c, time.c and fpga.c to omap1 subdirectory.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Move OMAP1 specific files to omap1
subdirectory to allow sharing code with upcoming OMAP2 boards.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Sync with linux-omap tree. Updates from various OMAP developers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This fixes some x86_64 bugs -

- maybe_map returns -1 on error instead of 0, which is interpreted as
  physical address 0

- removed an include of ipc.h, which isn't needed

- fixed the calculation of signal frame location

- the signal delivery code is now immune to the stack expansion check

- added a missing include
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

tt-mode closes switch_pipes in exit_thread_tt and kills processes in
switch_to_tt, if the exit_state is EXIT_DEAD or EXIT_ZOMBIE.

In very rare cases the exiting process can be scheduled out after having set
exit_state and closed switch_pipes (from release_task it calls proc_pid_flush,
which might sleep).  If this process is to be restarted, UML failes in
switch_to_tt with:

   write of switch_pipe failed, err = 9

We fix this by closing switch_pipes not in exit_thread_tt, but later in
release_thread_tt.  Additionally, we set switch_pipe[0] = 0 after closing.
switch_to_tt must not kill "from" process depending on its exit_state, but
must kill it after release_thread was processed only, so it examines
switch_pipe[0] for its decision.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Only x86 and x86_64 use arch_align_stack(), all other subarches have:

 #define arch_align_stack(x) (x)

So, if this definition is found, UML's own arch_align_stack() should be
skipped.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

tt/mem.c still uses hardcoded TOP for i386 instead of CONFIG_TOP_ADDR provided
by subarch's Kconfig_XXXX, which would be right.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>