- 11 Nov, 2009 40 commits
-
-
Rui Paulo authored
Update the format of path selection frames according to latest draft (3.03). Signed-off-by:
Rui Paulo <rpaulo@gmail.com> Signed-off-by:
Javier Cardona <javier@cozybit.com> Reviewed-by:
Andrey Yurovsky <andrey@cozybit.com> Tested-by:
Brian Cavagnolo <brian@cozybit.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rui Paulo authored
Update the length and format of the peer link management action frames. Signed-off-by:
-
Rui Paulo authored
Signed-off-by:
-
Rui Paulo authored
The Mesh Configuration Formation Info field contains the number of neighbors. This means that the beacon must be updated every time a peer joins or leaves. Signed-off-by:
-
Rui Paulo authored
Update the mesh time to live field to 31 according to draft 3.03. Signed-off-by:
-
Rui Paulo authored
This updates the Mesh Configuration IE according to the latest draft (3.03). Notable changes include the simplified protocol IDs. Signed-off-by:
-
Gertjan van Wingerde authored
When enabling rt2800usb as a built-in driver (as opposed to a as a module) the build fails. See http://marc.info/?l=linux-wireless&m=125768687711034&w=2 for details. Fix it by properly including <linux/usb.h> from rt2x00usb.h Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Gertjan van Wingerde authored
Make sure all drivers can benefit of the assignment of the interface type of an adapter, instead of keeping it for rt2800 only. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Julia Lawall authored
CCS_START_NETWORK is declared in drivers/net/wireless/rayctl.h with the comment Values for cmd. status is previously compared to CCS_COMMAND_COMPLETE, which is declared in the same file with the comment Values for buffer_status. Finally, it is possible at this point that cmd is CCS_START_NETWORK, because it is compared to that value in an enclosing switch that has CCS_START_NETWORK as one of two case labels around this code. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Michael Buesch authored
This fixes the RX error path for rev>=8 devices. The wrong register size and definitions were used. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Randy Dunlap authored
These wireless drivers in staging could be built when CONFIG_NET=n, CONFIG_NETDEVICES=n, causing this build error: net/wireless/wext-priv.c: In function 'ioctl_private_call': net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' due to faulty selects. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Ben Cahill authored
Add txq_id info to "Tx queue requesting wakeup" debug message Add "Rx queue requesting wakeup" debug message Move clear of CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ to be after nearby iwl_write_prph(), since iwl_write_prph() sets it and clears it. Almost removed it entirely, but just making sure in case someone removes the iwl_write_prph()! Also remove unneeded priv->lock usage; this is now handled by priv->reg_lock within iwl_clear_bit(). Join a couple of lines that had unneeded line returns. Signed-off-by:
Ben Cahill <ben.m.cahill@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by:
Jiajia Zheng <jiajia.zheng@intel.com> Signed-off-by:
-
Ben Cahill authored
Follow-up to "update write pointers for all tx queues after wakeup"; that patch changed iwl_irq_tasklet_legacy(), but not iwl_irq_tasklet(), so newer devices were not covered. Comments from original patch: Wakeup interrupt has been updating write pointers (indexes, actually) only for tx queues 0-5. This is adequate just for 3945, but inadequate for other devices, all of which have more tx queues. Now updating all tx/command queues, so device can be aware of all new tx and host commands enqueued while device was asleep. This can potentially improve data traffic bandwidth and/or latency. Signed-off-by:
-
Ben Cahill authored
Signed-off-by:
-
Ben Cahill authored
Signed-off-by:
-
Ben Cahill authored
Take advantage of device's auto-increment for SRAM reads to eliminate extra write address accesses. Grab/release NIC access before/after entire read sequence, rather than for each read individually. After a quick check of dmesg logs, this seems to double Event Log dump speed, reducing from about 20 milliseconds to about 10 milliseconds for 512 entries using 3945. Signed-off-by:
-
Ben Cahill authored
If device provides bad values for Event Log parameters (due to being asleep or SRAM corruption, etc.), the size can be very, very large (e.g. 0xa5a5a5a5), which can flood system log. Sanity-check capacity and next_entry values and limit to reasonable size dump. Signed-off-by:
-
Wey-Yi Guy authored
Do not use AP's SM_PS setting for our own SM_PS setting. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Wey-Yi Guy authored
Remove the support for all the PCI_IDs never make into production Signed-off-by:
-
Wey-Yi Guy authored
Different channel has different configuration, need to pass correct configuration to uCode when send "channel switch" command to uCode. Invalid configuration will cause sysassert in uCode and produce un-expected result. Even it is a very small windows, but we also need to consider and handle the case if commit_rxon occurred before the "channel switch announcement" notification received from uCode. Signed-off-by:
-
Johannes Berg authored
This is part of the code, but the comment doesn't have it, add pointers to the code and the FIFO usage for 5000 and up. Signed-off-by:
-
Wey-Yi Guy authored
Remove un-used parameter "recovery_rxon" from "priv" data structure Signed-off-by:
-
Johannes Berg authored
When I added that code setting the swq_id, I evidently did not understand the distinction between FIFO and TX queue yet and added code to compare a queue ID and a FIFO number, which is bogus. However, the code there need not be this specific, it can just set all queues to the identity mapping which will be overwritten by the aggregation queue code. As a bit of defensive coding, don't assign an swq_id to the command queue so that if we ever use it for frames we notice quickly. Signed-off-by:
-
Johannes Berg authored
The fourth queue (command queue) is already activated in the loop above that also maps it to the command FIFO and therefore doesn't need to be marked as activated again. Also change the TODO comment to be accurate -- we need to initialise the _queues_, not FIFOs, and map them to device FIFOs. Signed-off-by:
-
Wey-Yi Guy authored
For both 6x00 and 6x50 series devices, periodic Tx IQ calibration is disabled in uCode, driver do not need to set the periodic Tx/IQ calibration bit in calibration command. Signed-off-by:
-
Shanyu Zhao authored
Use configured valid rx chains in scan command instead of ANT_ABC, correcting valid rx chain configuration of 4965, should be ANT_ABC instead of ANT_AB. Signed-off-by:
Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by:
-
