- 26 Feb, 2010 40 commits
-
-
Richard Röjfors authored
This patch addes timb-radio to all configurations of the timberdale MFD. Connected to the FPGA is a TEF6862 tuner and a SAA7706H DSP, the I2C board info of these devices is passed via the timb-radio platform data. Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Cc: sameo@linux.intel.com Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Roel Kluin authored
The parenthesis was misplaced, tmp is set to 0 or break occurs, while debugging opera1_usb_i2c_msgxfer() retval was not shown. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> CC: Marco Gittler <g.marco@freenet.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
A small mistake on the last patch broke demod s-code setup for XC3028L (firmware 3.2 and upper). Fix it. Thanks-to: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: -
Mauro Carvalho Chehab authored
There's one reported regression in Australia (DTV7) and some reported troubles with newer firmwares found on xc3028l chips. Rework the logic to improve tuner on those cases. Thanks-to: Robert Lowery <rglowery@exemail.com.au> Thanks-to: Stefan Ringel <stefan.ringel@arcor.de> Tested-by:
Robert Lowery <rglowery@exemail.com.au> CC: stable.kernel.org Signed-off-by:
-
Jean Delvare authored
Add a new module parameter "disable_ir" to disable IR support. Several other drivers do that already, and this can be very handy for debugging purposes. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Catimimi authored
I succeeded in running Cinergy Hybrid T USB XS FR in both modes. Signed-off-by: -
Randy Dunlap authored
Fix sparse warnings in media/dvb/frontends: drivers/media/dvb/frontends/dibx000_common.c:177:13: warning: non-ANSI function declaration of function 'systime' drivers/media/dvb/frontends/tda665x.c:136:55: warning: right shift by bigger than source value [mchehab@redhat.com: removed the change at dib0090 since it got fixed by a previous patch] Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Jiri Slaby authored
Userspace is allowed to coalesce events between SYNCs. And since the code emits UP right after DOWN for the same key, it may be missed (up+down=nothing). Add an extra sync in between UP and DOWN events to disable the coalesce. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Lars Hanisch authored
I don't know if there are applications which rely on this name, but after all it's a spelling mistake. Signed-off-by:
Lars Hanisch <dvb@cinnamon-sage.de> CC: Janne Granau <j@jannau.net> Signed-off-by:
-
Franklin Meng authored
Signed-off-by:
Franklin Meng <fmeng2002@yahoo.com> Signed-off-by:
-
Randy Dunlap authored
RADIO_TIMBERDALE selects RADIO_SAA7706H, but RADIO_SAA7706H depends on I2C, so make RADIO_TIMBERDALE depend on I2C also; otherwise there are build errors: drivers/media/radio/saa7706h.c:139: error: implicit declaration of function 'i2c_master_send' drivers/media/radio/saa7706h.c:148: error: implicit declaration of function 'i2c_transfer' drivers/media/radio/saa7706h.c:372: error: implicit declaration of function 'i2c_check_functionality' drivers/media/radio/saa7706h.c:375: error: implicit declaration of function 'i2c_adapter_id' drivers/media/radio/saa7706h.c:438: error: implicit declaration of function 'i2c_add_driver' drivers/media/radio/saa7706h.c:443: error: implicit declaration of function 'i2c_del_driver' Signed-off-by:
-
Randy Dunlap authored
When CONFIG_PM is not enabled, tlg2300 has build errors, so handle that case, mostly via stubs. drivers/media/video/tlg2300/pd-alsa.c:237: error: 'struct poseidon' has no member named 'msg' drivers/media/video/tlg2300/pd-main.c:412: error: implicit declaration of function 'find_old_poseidon' drivers/media/video/tlg2300/pd-main.c:418: error: implicit declaration of function 'set_map_flags' drivers/media/video/tlg2300/pd-main.c:462: error: implicit declaration of function 'get_pd' Cc: linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>, linux-media@vger.kernel.org Signed-off-by:
-
Randy Dunlap authored
Fix mfd/timberdale build error -- add depends GPIOLIB. include/linux/spi/max7301.h:14: error: field 'chip' has incomplete type build-r7353.out:make[3]: *** [drivers/mfd/timberdale.o] Error 1 Repairs commit ff7a26e08a16bb31158d830dbf60db2ff47019ab Author: Richard R<C3><B6>jfors <richard.rojfors@pelagicore.com> AuthorDate: Thu Feb 4 08:18:52 2010 -0300 Commit: Mauro Carvalho Chehab <mchehab@redhat.com> CommitDate: Fri Feb 5 12:25:37 2010 -0200 V4L/DVB: mfd: Add support for the timberdale FPGA Signed-off-by:Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Santiago Nunez-Corrales authored
This patch provides menu configuration options for the TVP7002 decoder driver in DM365. Includes only TVP7002. Signed-off-by:
Santiago Nunez-Corrales <santiago.nunez@ridgerun.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
> On Mon, 22 Feb 2010 08:21:44 -0800 Randy Dunlap wrote: > drivers/media/video/tvp7002.c:896: error: 'struct tvp7002' has no member named 'registers' > > so where are these registers?? Hmm, that code is a remnant from older revisions of this driver. Unfortunately, when I compiled this driver before creating my pull request I forgot to turn on the CONFIG_VIDEO_ADV_DEBUG option and so I never saw it. Also fixed the g_register function: it never returned a register value in the original code. Signed-off-by:
-
Santiago Nunez-Corrales authored
This patch provides the implementation of the TVP7002 decoder driver for DM365. Implemented using the V4L2 DV presets API. Removed shadow register values. Testing shows that the device needs not to be powered down and up for correct behaviour. Improved readability. Uses helper function for preset information. [mchehab@redhat.com: Fix bad Whitespacing] Signed-off-by:
-
Santiago Nunez-Corrales authored
This patch provides the required definitions for the TVP7002 driver in DM365. Signed-off-by:
-
Santiago Nunez-Corrales authored
This patch provides required chip identification definitions within v4l2. Included only definitions for TVP7002. Signed-off-by:
-
Manu Abraham authored
drivers/media/dvb/dvb-usb/az6027.c:390: warning: excess elements in struct initializer drivers/media/dvb/dvb-usb/az6027.c:390: warning: (near initialization for ‘az6027_rc_keys[0]’) drivers/media/dvb/dvb-usb/az6027.c:391: warning: excess elements in struct initializer drivers/media/dvb/dvb-usb/az6027.c:391: warning: (near initialization for ‘az6027_rc_keys[1]’) drivers/media/dvb/dvb-usb/az6027.c:759: warning: ‘az6027_read_mac_addr’ defined but not used Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
This reverts commit 1e08370814e8902074d59cc57f2b4c1a62f00ee8. Patch were wrongly applied. Signed-off-by: -
Mauro Carvalho Chehab authored
This reverts commit 234497b022c464532976b8a12614819bcf67f41b. Patch were wrongly applied. Signed-off-by: -
Guennadi Liakhovetski authored
Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Just pass VIDIOC_S_PARM and VIDIOC_G_PARM down to host drivers. So far no special handling in soc-camera core. Signed-off-by:
-
Magnus Damm authored
Update the soc-camera i2c code to return -ENODEV if a camera sensor is missing instead of -ENOMEM. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
-
Antonio Ospite authored
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or even to request GPIOs to be used by the camera *sensor*. These initializations can be performed statically in machine init functions. The current semantics for this init() callback is ambiguous anyways, it is invoked in pxa_camera_activate(), hence at device node open, but its users use it like a generic initialization to be done at module init time (configure MFP, request GPIOs for *sensor* control). Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Kuninori Morimoto authored
This patch removes "buswidth" struct member, and sets the default buswidth to the natively supported 10 bit. You can select 8 bit buswidth by new flag. This patch also modify ap325rxa/migor setup.c Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Use soc_camera_apply_sensor_flags() in mt9v022 to account for any inverters in video signal paths. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb/dvb-usb/az6027.c:759: warning: ‘az6027_read_mac_addr’ defined but not used While there's some code that uses it, it is currently commented. So, comment also the function itself. CC: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/dvb/dvb-usb/az6027.c:390: warning: excess elements in struct initializer drivers/media/dvb/dvb-usb/az6027.c:390: warning: (near initialization for ‘az6027_rc_keys[0]’) drivers/media/dvb/dvb-usb/az6027.c:391: warning: excess elements in struct initializer drivers/media/dvb/dvb-usb/az6027.c:391: warning: (near initialization for ‘az6027_rc_keys[1]’) CC: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: -
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Adams Xu authored
Signed-off-by:
-
Huang Shijie authored
video : use the V4L2_STD macros to select the proper audio setting. radio : add preemphasis ctr. test it by the command: v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1 [mchehab@redhat.com: folded documentation patch] Signed-off-by:
Huang Shijie <shijie8@gmail.com> Signed-off-by:
-
Huang Shijie authored
pd-common.h contains the common data structures, while vendorcmds.h contains the vendor commands for firmware. [mchehab@redhat.com: Folded the 10 patches with the driver] Signed-off-by:
-
Franklin Meng authored
Adds remote support for the Kworld 315U device I have added the change for the IR_TYPE_NEC that Mauro suggested. Note: I believe I got most of the mappings correct. Though the source and shutdown button probably could be mapped to something better. [mchehab@redhat.com: Fix CodingStyle] Signed-off-by:
-
Darren Jenkins authored
In si470x_usb_driver_disconnect() radio->disconnect_lock is accessed after it is freed. This fixes the problem. Coverity CID: 2530 Signed-off-by:
Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by:
-
