- 10 Feb, 2010 2 commits
-
-
Stefan Roese authored
This patch adds NOR FLASH MTD support to the Katmai (440SPe) dts file. For this the OPB ranges address is mapped differently (base 0x00000000 -> 0xe0000000). This results in the address being identical to the lower 32bit of its physical address. This is needed for the MTD mapping to work correctly, since U-Boot will insert the physical addresses of the EBC chip selects into the EBC ranges property. This is the way its done in most other 4xx dts files as well. Additionally with a small whitespace cleanup. Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
Stefan Roese authored
Also set L2C_CFG_RDBW on 460GT platforms and not only on 460EX. Signed-off-by:
-
- 09 Feb, 2010 11 commits
-
-
Anton Blanchard authored
The clockevent multiplier and shift is useful information, but we only need to print it once. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
RTAS should never cause an exception but if it does (for example accessing outside our RMO) then we might go a long way through the kernel before oopsing. If we unset MSR_RI we should at least stop things on exception exit. Signed-off-by:
-
Frans Pop authored
Signed-off-by:
Frans Pop <elendil@planet.nl> Cc: linuxppc-dev@ozlabs.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Anton Blanchard authored
We use firmware_has_feature quite a lot these days, so it's worth putting powerpc_firmware_features into __read_mostly. Signed-off-by:
-
Anton Blanchard authored
Clean up SD_NODE_INITS so we can easily compare it to x86. Similar to the work in 47734f89 (sched: Clean up topology.h) Signed-off-by:
-
Anton Blanchard authored
We can use the much more lightweight ida allocator since we don't need the pointer storage idr provides. Signed-off-by:
-
Anton Blanchard authored
Add printout of last accessed sysfs file, added to x86 in ae87221d (sysfs: crash debugging) Also add the notify_die hook that allows us to print out the ftrace buffer on oops. This is useful in conjunction with ftrace function_graph: Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=128 NUMA pSeries last sysfs file: /sys/class/net/tunl0/type Dumping ftrace buffer: ... 0) | .sysrq_handle_crash() { 0) 0.476 us | .hash_page(); 0) 0.488 us | .xmon_fault_handler(); 0) | .bad_page_fault() { 0) | .search_exception_tables() { 0) 0.590 us | .search_module_extables(); 0) 2.546 us | } 0) | .printk() { 0) | .vprintk() { 0) 0.488 us | ._raw_spin_lock(); 0) 0.572 us | .emit_log_char(); Showing the function graph of a sysrq-c crash. Signed-off-by:
-
Anton Blanchard authored
The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by:
-
Anton Blanchard authored
The cede latency stuff is relatively new and we don't need to complain about it not working on older firmware. Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Joe Perches authored
String constants that are continued on subsequent lines with \ are not good. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Will Schmidt authored
The tb_total and purr_total values reported via the hcall_stats code should be cumulative, rather than being replaced by the latest delta tb or purr value. Tested-by:
Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by:
-
- 04 Feb, 2010 1 commit
-
-
Benjamin Herrenschmidt authored
Updated variant of a patch by Joel Schopp. The field containing the number of supported cores which we pass to firmware via the ibm,client-architecture call was set by a previous patch statically as high as is possible (NR_CPUS). However, that value isn't quite right for a system that supports multiple threads per core, thus permitting the firmware to assign more cores to a Linux partition than it can really cope with. This patch improves it by using the device-tree to determine the number of threads supported by the processors in order to adjust the value passed to firmware. Signed-off-by:
Joel Schopp <jschopp@austin.ibm.com> Signed-off-by:
-
- 03 Feb, 2010 13 commits
-
-
jschopp@austin.ibm.com authored
This patch adds 2 fields to the ibm_architecture_vec array. The first of these fields indicates the number of cores which Linux can boot. It does not account for SMT, so it may result in cpus assigned to Linux which cannot be booted. A second patch follows that dynamically updates this for SMT. The second field just indicates that our OS is Linux, and not another OS. The system may or may not use this hint to performance tune settings for Linux. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by:
-
Michael Ellerman authored
We can free memory allocated with lmb_alloc() by removing it from the list of reserved LMBs. Rework lmb_remove() to allow that possibility and add lmb_free() which exploits it. BenH: Removed some useless parenthesis Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Anton Blanchard authored
With dynamic irq descriptors the overhead of a large NR_IRQS is much lower than it used to be. With more MSI-X capable adapters and drivers exploiting multiple vectors we may as well allow the user to increase it beyond the current maximum of 512. 32768 seems large enough that we'd never have to bump it again (although I bet my prediction is horribly wrong). It boot tests OK and the vmlinux footprint increase is only around 500kB due to: struct irq_map_entry irq_map[NR_IRQS]; We format /proc/interrupts correctly with the previous changes: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 286: 0 0 0 0 0 0 516: 0 0 0 0 0 0 16689: 1833 0 0 0 0 0 17157: 0 0 0 0 0 0 17158: 319 0 0 0 0 0 25092: 0 0 0 0 0 0 Signed-off-by: -
Jean Delvare authored
Some code that is in ams_exit() (the module exit code) should instead be called when the device (not module) is removed. It probably doesn't make much of a difference in the PMU case, but in the I2C case it does matter. I make no guarantee that my fix isn't racy, I'm not familiar enough with the ams driver code to tell for sure. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Tested-by:
Christian Kujau <lists@nerdbynature.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stelian Pop <stelian@popies.net> Cc: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: stable@kernel.org Signed-off-by:
-
Jean Delvare authored
Looking at drivers/macintosh/therm_adt746x.c, the sysfs files are created in thermostat_init() and removed in thermostat_exit(), which are the driver's init and exit functions. These files are backed-up by a per-device structure, so it looks like the wrong thing to do: the sysfs files have a lifetime longer than the data structure that is backing it up. I think that sysfs files creation should be moved to the end of probe_thermostat() and sysfs files removal should be moved to the beginning of remove_thermostat(). Signed-off-by:
-
Amit Shah authored
Virtio consoles can be hotplugged, so hvc_alloc gets called from multiple sites: from the initial probe() routine as well as later on from workqueue handlers which aren't __devinit code. So, drop the __devinit annotation for hvc_alloc. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Cc: linuxppc-dev@ozlabs.org Signed-off-by:
-
Rusty Russell authored
This is nicer for modern R/O protection. And noone needs it non-const, so constify the callers as well. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Peter Tyser authored
Recent U-Boot commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb caused the "cpu-release-addr" device tree property to contain the physical RAM location that secondary cores were spinning at. Previously, the "cpu-release-addr" property contained a value referencing the boot page translation address range of 0xfffffxxx, which then indirectly accessed RAM. The "cpu-release-addr" is currently ioremapped and the secondary cores kicked. However, due to the recent change in "cpu-release-addr", it sometimes points to a memory location in low memory that cannot be ioremapped. For example on a P2020-based board with 512MB of RAM the following error occurs on bootup: <...> mpic: requesting IPIs ... __ioremap(): phys addr 0x1ffff000 is RAM lr c05df9a0 Unable to handle kernel paging request for data at address 0x00000014 Faulting instruction address: 0xc05df9b0 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P2020 RDB Modules linked in: <... eventual kernel panic> Adding logic to conditionally ioremap or access memory directly resolves the issue. Signed-off-by:
Peter Tyser <ptyser@xes-inc.com> Signed-off-by:
Nate Case <ncase@xes-inc.com> Reported-by:
Dipen Dudhat <B09055@freescale.com> Tested-by:
-
Anton Blanchard authored
Using perf to trace L1 dcache misses and dumping data addresses I found a few variables taking a lot of misses. Since they are almost never written, they should go into the __read_mostly section. Signed-off-by:
-
Anton Blanchard authored
The cputime code has a few places that do per_cpu(, smp_processor_id()). Replace them with __get_cpu_var(). Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Joe Perches authored
Use #define pr_fmt(fmt) "viod: " fmt Remove #define VIOD_KERN_WARNING and VIOD_KERN_INFO Convert printk(VIOD_KERN_<level> to pr_<level> Coalesce long format strings Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> drivers/block/viodasd.c | 86 +++++++++++++++++++--------------------------- 1 files changed, 36 insertions(+), 50 deletions(-) Signed-off-by:
-
- 02 Feb, 2010 13 commits
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: Do not idle on async queues blk-cgroup: Fix potential deadlock in blk-cgroup block: fix bugs in bio-integrity mempool usage block: fix bio_add_page for non trivial merge_bvec_fn case drbd: null dereference bug drbd: fix max_segment_size initialization
-
Nick Piggin authored
Improve handling of fragmented per-CPU vmaps. We previously don't free up per-CPU maps until all its addresses have been used and freed. So fragmented blocks could fill up vmalloc space even if they actually had no active vmap regions within them. Add some logic to allow all CPUs to have these blocks purged in the case of failure to allocate a new vm area, and also put some logic to trim such blocks of a current CPU if we hit them in the allocation path (so as to avoid a large build up of them). Christoph reported some vmap allocation failures when using the per CPU vmap APIs in XFS, which cannot be reproduced after this patch and the previous bug fix. Cc: linux-mm@kvack.org Cc: stable@kernel.org Tested-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Nick Piggin <npiggin@suse.de> -- Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nick Piggin authored
RCU list walking of the per-cpu vmap cache was broken. It did not use RCU primitives, and also the union of free_list and rcu_head is obviously wrong (because free_list is indeed the list we are RCU walking). While we are there, remove a couple of unused fields from an earlier iteration. These APIs aren't actually used anywhere, because of problems with the XFS conversion. Christoph has now verified that the problems are solved with these patches. Also it is an exported interface, so I think it will be good to be merged now (and Christoph wants to get the XFS changes into their local tree). Cc: stable@kernel.org Cc: linux-mm@kvack.org Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: random: Remove unused inode variable crypto: padlock-sha - Add import/export support random: drop weird m_time/a_time manipulation
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Use GFP_NOFS for alloc structure GFS2: Fix previous patch GFS2: Don't withdraw on partial rindex entries GFS2: Fix refcnt leak on gfs2_follow_link() error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix access to released memory in clk_debugfs_register_one() sh: Fix access to released memory in dwarf_unwinder_cleanup() usb: r8a66597-hdc disable interrupts fix spi: spi_sh_msiof: Fixed data sampling on the correct edge
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: 64-bit: Detect virtual memory size MIPS: AR7: Fix USB slave mem range typo MIPS: Alchemy: Fix dbdma ring destruction memory debugcheck.
-
Linus Torvalds authored
Commit 221af7f8 ("Split 'flush_old_exec' into two functions") split the function at the point of no return - ie right where there were no more error cases to check. That made sense from a technical standpoint, but when we then also combined it with the actual personality setting going in between flush_old_exec() and setup_new_exec(), it needs to be a bit more careful. In particular, we need to make sure that we really flush the old personality bits in the 'flush' stage, rather than later in the 'setup' stage, since otherwise we might be flushing the _new_ personality state that we're just setting up. So this moves the flags and personality flushing (and 'flush_thread()', which is the arch-specific function that generally resets lazy FP state etc) of the old process into flush_old_exec(), so that it doesn't affect any state that execve() is setting up for the new process environment. This was reported by Michal Simek as breaking his Microblaze qemu environment. Reported-and-tested-by:
Michal Simek <michal.simek@petalogix.com> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Vivek Goyal authored
Few weeks back, Shaohua Li had posted similar patch. I am reposting it with more test results. This patch does two things. - Do not idle on async queues. - It also changes the write queue depth CFQ drives (cfq_may_dispatch()). Currently, we seem to driving queue depth of 1 always for WRITES. This is true even if there is only one write queue in the system and all the logic of infinite queue depth in case of single busy queue as well as slowly increasing queue depth based on last delayed sync request does not seem to be kicking in at all. This patch will allow deeper WRITE queue depths (subjected to the other WRITE queue depth contstraints like cfq_quantum and last delayed sync request). Shaohua Li had reported getting more out of his SSD. For me, I have got one Lun exported from an HP EVA and when pure buffered writes are on, I can get more out of the system. Following are test results of pure buffered writes (with end_fsync=1) with vanilla and patched kernel. These results are average of 3 sets of run with increasing number of threads. AVERAGE[bufwfs][vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- bufwfs 3 1 0 0 95349 474141 bufwfs 3 2 0 0 100282 806926 bufwfs 3 4 0 0 109989 2.7301e+06 bufwfs 3 8 0 0 116642 3762231 bufwfs 3 16 0 0 118230 6902970 AVERAGE[bufwfs] [patched kernel] ------- bufwfs 3 1 0 0 270722 404352 bufwfs 3 2 0 0 206770 1.06552e+06 bufwfs 3 4 0 0 195277 1.62283e+06 bufwfs 3 8 0 0 260960 2.62979e+06 bufwfs 3 16 0 0 299260 1.70731e+06 I also ran buffered writes along with some sequential reads and some buffered reads going on in the system on a SATA disk because the potential risk could be that we should not be driving queue depth higher in presence of sync IO going to keep the max clat low. With some random and sequential reads going on in the system on one SATA disk I did not see any significant increase in max clat. So it looks like other WRITE queue depth control logic is doing its job. Here are the results. AVERAGE[brr, bsr, bufw together] [vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 850 546345 0 0 bsr 3 1 14650 729543 0 0 bufw 3 1 0 0 23908 8274517 brr 3 2 981.333 579395 0 0 bsr 3 2 14149.7 1175689 0 0 bufw 3 2 0 0 21921 1.28108e+07 brr 3 4 898.333 1.75527e+06 0 0 bsr 3 4 12230.7 1.40072e+06 0 0 bufw 3 4 0 0 19722.3 2.4901e+07 brr 3 8 900 3160594 0 0 bsr 3 8 9282.33 1.91314e+06 0 0 bufw 3 8 0 0 18789.3 23890622 AVERAGE[brr, bsr, bufw mixed] [patched kernel] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 837 417973 0 0 bsr 3 1 14357.7 591275 0 0 bufw 3 1 0 0 24869.7 8910662 brr 3 2 1038.33 543434 0 0 bsr 3 2 13351.3 1205858 0 0 bufw 3 2 0 0 18626.3 13280370 brr 3 4 913 1.86861e+06 0 0 bsr 3 4 12652.3 1430974 0 0 bufw 3 4 0 0 15343.3 2.81305e+07 brr 3 8 890 2.92695e+06 0 0 bsr 3 8 9635.33 1.90244e+06 0 0 bufw 3 8 0 0 17200.3 24424392 So looks like it might make sense to include this patch. Thanks Vivek Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
Guenter Roeck authored
Linux kernel 2.6.32 and later allocate address space from the top of the kernel virtual memory address space. This patch implements virtual memory size detection for 64 bit MIPS CPUs to avoid resulting crashes. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/935/Reviewed-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Marek Skuczynski authored
Signed-off-by:
Marek Skuczynski <mareksk7@gmail.com> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Marek Skuczynski authored
Signed-off-by:
Matt Fleming <matt@console-pimps.org> Signed-off-by:
-
Magnus Damm authored
This patch improves disable_controller() in the r8a66597-hdc driver to disable all interrupts and clear status flags. It also makes sure that disable_controller() is called during probe(). This fixes the relatively rare case of unexpected pending interrupts after kexec reboot. Signed-off-by:
Magnus Damm <damm@opensource.se> Acked-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
