- 20 Aug, 2007 9 commits
-
-
Bartlomiej Zolnierkiewicz authored
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Also this host driver requires valid PCI BAR4 for normal operation so check it in ->init_chipset and fail initialization if not set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Also this host driver requires valid PCI BAR4 for normal operation so check it in ->init_chipset and fail initialization if not set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Use ->OUTBSYNC instead of ->OUTB when writing command register (needed for scc_pata and pmac host drivers). * Don't check DRDY bit of the status register on ATAPI devices (ATAPI devices are free to ignore DRDY bit). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Move ide_in_drive_list() from ide-dma.c to ide-iops.c. * Add ivb_list[] table for listening early UDMA66 devices which don't conform to ATA4 standard wrt cable detection (bit14 is zero, only bit13 is valid) and use only device side cable detection for them since host side cable detection may be unreliable. * Add model "QUANTUM FIREBALLlct10 05" with firwmare "A03.0900" to the list (from Craig's bugreport). v2: * Improve kernel message basing on suggestion from Sergei. v3: * Don't print kernel message when no device side cable detection is done, plus some minor fixes. (Noticed by Sergei) Thanks to Craig for testing this patch. Cc: Craig Block <chblock3@yahoo.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
pmac_ide_tune_chipset() don't set drive->init_speed. Fix it by setting drive->{current,init}_speed in pmac_ide_do_setfeature() and clean up pmac_ide_{tune_chipset,mdma_enable,udma_enable}(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Add DMA blacklist checking (->ide_dma_on check probably can go now). * Add ->atapi_dma flag checking and remove no longer needed ns87415_ide_dma_check() from ns87415 host driver. * Remove now needless __ide_dma_check() wrapper and symbol export. * Check drive->autodma instead of hwif->autodma (there should be no changes in behavior as all users of config_drive_for_dma() set both ->autodma flags). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their config options lack explicit dependencies on IDE_GENERIC. In the long-term these host drivers should be fixed to do the probing themselves but for now fix them by making their config options select CONFIG_IDE_GENERIC. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Tejun Heo authored
These days, CONFIG_IDE_GENERIC causes more confusion and misconfiguration than it helps. Especially so because libata is linked after the generic driver. Default to N. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: "P.C.Chan" <pc.chan@alcatel-lucent.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 19 Aug, 2007 1 commit
-
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 18 Aug, 2007 25 commits
-
-
Chris Wright authored
With commit ab144f5e the patching code now collects the complete new instruction stream into a temp buffer before finally patching in the new insns. In some cases the paravirt patchers will choose to leave the patch site unpatched (length mismatch, clobbers mismatch, etc). This causes the new patching code to copy an uninitialized temp buffer, i.e. garbage, to the callsite. Simply make sure to always initialize the buffer with the original instruction stream. A better fix is to audit all the patchers and return proper length so that apply_paravirt() can skip copies when we leave the patch site untouched. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4549/1: KS8695: Fix build errors [ARM] 4546/1: s3c2410: fix architecture typo for s3c2442 [ARM] 4544/1: arm: fix section mismatch in pxa fb
-
Andi Kleen authored
Very old 64bit binutils have .cfi_startproc/endproc, but no .cfi_rel_offset. Check for .cfi_rel_offset too. Cc: Jan Beulich <jbeulich@novell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andi Kleen authored
Very old binutils (2.12.90...) seem to have trouble with newlines in assembler macro invocation. They put them into the resulting argument expansion. In this case this lead to a parse error because a .rept expression ended up spread over multiple lines. Change the PMDS() invocation to a single line. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Gollub authored
Fixed wrong expression which enabled watchdogs even if nmi_watchdog kernel parameter wasn't set. This regression got slightly introduced with commit b7471c6d. Introduced NMI_DISABLED (-1) which allows to switch the value of NMI_DEFAULT without breaking the APIC NMI watchdog code (again). Fixes: https://bugzilla.novell.com/show_bug.cgi?id=298084 http://bugzilla.kernel.org/show_bug.cgi?id=7839 And likely some more nmi_watchdog=0 related issues. Signed-off-by: Daniel Gollub <dgollub@suse.de> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andi Kleen authored
This should fix an oops with PCMCIA PATA devices http://bugzilla.kernel.org/show_bug.cgi?id=8424 This is not a full fix for the problem, but probably still the right thing to do. [ I'm almost certain it's *not* the right thing to do, but it avoids an oops, and I want comments from others on what the right thing would actually be.. I suspect we should just remove the use of dma_mask entirely in this function, and just use coherent_dma_mask. - Linus ] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Timo Jantunen authored
If the forcedeth driver receives too much work in an interrupt, it assumes it has a broken hardware with stuck IRQ. It works around the problem by disabling interrupts on the nic but makes a printk while holding device spinlog - which isn't smart thing to do if you have netconsole on the same nic. This patch moves the printk's out of the spinlock protected area. Without this patch the machine hangs hard. With this patch everything still works even when there is significant increase on CPU usage while using the nic. Signed-off-by: Timo Jantunen <jeti@iki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Satyam Sharma authored
Use cpu_relax() in the busy loops, as atomic_read() doesn't automatically imply volatility for i386 and x86_64. x86_64 doesn't have this issue because it open-codes the while loop in smpboot.c:smp_callin() itself that already uses cpu_relax(). For i386, however, smpboot.c:smp_callin() calls wait_for_init_deassert() which is buggy for mach-default and mach-es7000 cases. [ I test-built a kernel -- smp_callin() itself got inlined in its only callsite, smpboot.c:start_secondary() -- and the relevant piece of code disassembles to the following: 0xc1019704 <start_secondary+12>: mov 0xc144c4c8,%eax 0xc1019709 <start_secondary+17>: test %eax,%eax 0xc101970b <start_secondary+19>: je 0xc1019709 <start_secondary+17> init_deasserted (at 0xc144c4c8) gets fetched into %eax only once and then we loop over the test of the stale value in the register only, so these look like real bugs to me. With the fix below, this becomes: 0xc1019706 <start_secondary+14>: pause 0xc1019708 <start_secondary+16>: cmpl $0x0,0xc144c4c8 0xc101970f <start_secondary+23>: je 0xc1019706 <start_secondary+14> which looks nice and healthy. ] Thanks to Heiko Carstens for noticing this. Signed-off-by: Satyam Sharma <satyam@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Engelhardt authored
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
The lguest block device only requests one minor, which means partitions don't work (eg "root=/dev/lgba1"). Let's follow the crowd and ask for 16. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: arch/sh64/kernel/setup.c: duplicate include removal. sh64: arch/sh64/kernel/signal.c: duplicate include removal sh64: Add missing dma_sync_single_for_*().
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23: sh: remove extraneous ; on scif_sercon_putc wait loop sh: Add missing dma_sync_single_range_for_*(). sh: panic on machvec section misalignment. sh: Fix PTRACE_PEEKTEXT/PEEKDATA fallout from generic_ptrace_peekdata().
-
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds authored
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (smsc47m1) restore missing name attribute hwmon: (w83627ehf) don't assume bank 0 hwmon: (w83627ehf) read fan_div values during probe hwmon: fix w83781d temp sensor type setting
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: Cross-compilation between e.g. i386 -> 64bit could break -> work around it [IA64] Enable early console for Ski simulator [IA64] forbid ptrace changes psr.ri to 3 [IA64] Failure to grow RBS [IA64] Fix processor_get_freq [IA64] SGI Altix : fix a force_interrupt bug on altix [IA64] Update arch/ia64/configs/* s/SLAB/SLUB/ [IA64] get back PT_IA_64_UNWIND program header [IA64] need NOTES in vmlinux.lds.S [IA64] make unwinder stop at last frame of the bootloader [IA64] Clean up CPE handler registration [IA64] Include Kconfig.preempt [IA64] SN2 needs platform specific irq_to_vector() function. [IA64] Use atomic64_read to read an atomic64_t. [IA64] disable irq's and check need_resched before safe_halt
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: correct error code in selinux_audit_rule_init
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Incorrect semicolon after if statement mlx4_core: Wait 1 second after reset before accessing device IPoIB: Fix leak in ipoib_transport_dev_init() error path IB/mlx4: Fix opcode returned in RDMA read completion IB/srp: Add OUI for new Cisco targets IB/srp: Wrap OUI checking for workarounds in helper functions RDMA/cxgb3: Always call low level send function via cxgb3_ofld_send() IB: Move the macro IB_UMEM_MAX_PAGE_CHUNK() to umem.c IB: Include <linux/list.h> and <linux/rwsem.h> from <rdma/ib_verbs.h> IB: Include <linux/list.h> from <rdma/ib_mad.h> IB/mad: Fix address handle leak in mad_rmpp IB/mad: agent_send_response() should be void IB/mad: Fix memory leak in switch handling in ib_mad_recv_done_handler() IB/mad: Fix error path if response alloc fails in ib_mad_recv_done_handler() IB/sa: Don't need to check for default P_Key twice IB/core: Ignore membership bit in ib_find_pkey()
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [MATH-EMU]: Fix underflow exception reporting. [SPARC64]: Create a HWCAP_SPARC_N2 and report it to userspace on Niagara-2. [SPARC64]: SMP trampoline needs to avoid %tick_cmpr on sun4v too. [SPARC64]: Do not touch %tick_cmpr on sun4v cpus. [SPARC64]: Niagara-2 optimized copies. [SPARC64]: Allow userspace to get at the machine description. [SPARC32]: Remove superfluous 'kernel_end' alignment on sun4c. [SPARC32]: Fix bogus ramdisk image location check. [SPARC32]: Remove iommu from struct sbus_bus and use archdata like sparc64.
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Invalid semicolon after if statement [NET]: Fix unbalanced rcu_read_unlock in __sock_create [VLAN] net/8021q/vlanproc.c: fix check-after-use [NET]: Unexport dev_ethtool [IOAT]: Remove redundant struct member to avoid descriptor cache miss [ECONET]: remove econet_packet_type on unload [AX25]: don't free pointers to statically allocated data [PATCH] mac80211: probe for hidden SSIDs in pre-auth scan [PATCH] mac80211: fix tx status frame code [BRIDGE]: Fix typo in net/bridge/br_stp_if.c [BRIDGE]: sysfs locking fix. [NETFILTER]: nf_nat_sip: don't drop short packets [NETFILTER]: nf_conntrack_sip: fix SIP-URI parsing [NETFILTER]: nf_conntrack_sip: check sname != NULL before calling strncmp [NETFILTER]: netfilter: xt_u32 bug correction
-
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] Define mmiowb() [AVR32] Fix bogus pte_page() definition [AVR32] Simplify pte_alloc_one{,_kernel} include/asm-avr32/pgalloc.h: kmalloc + memset conversion to kcalloc [AVR32] Wire up i2c-gpio on the ATNGW100 board [AVR32] leds-gpio for stk1000
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix invalid semicolon after if statement [POWERPC] ps3: Fix no storage devices found [POWERPC] Fix for assembler -g [POWERPC] Fix small race in 44x tlbie function [POWERPC] Remove unused code causing a compile warning [POWERPC] cell: Fix errno for modular spufs_create with invalid neighbour
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: adjust libata to ignore errors after spinup ata_piix: add TECRA M7 to broken suspend list pata_hpt{37x|3x2n}: fix clock reporting (take 2) pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2) pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R] ata_piix: update map 10b for ich8m sata_mv: PCI IDs for Hightpoint RocketRaid 1740/1742 [libata] pata_isapnp: replace missing module device table
-
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setupLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [x86 setup] edd.c: make sure MBR signatures actually get reported [x86 setup] Don't use EDD to get the MBR signature [x86 setup] The current display page is returned in %bh, not %bl
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Check return code on failed alloc [CIFS] Update CIFS project web site [CIFS] Fix hang in find_writable_file
-
Marcel Holtmann authored
This fixes a vulnerability in the "parent process death signal" implementation discoverd by Wojciech Purczynski of COSEINC PTE Ltd. and iSEC Security Research. http://marc.info/?l=bugtraq&m=118711306802632&w=2Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Cyrill Gorcunov authored
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
-
- 17 Aug, 2007 5 commits
-
-
Thomas Renninger authored
Adrian Bunk: scripts/mod/file2alias.c is compiled with HOSTCC and ensures that kernel_ulong_t is correct, but it can't cope with different padding on different architectures. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Peter Chubb authored
When using Ski to debug early startup, it's a bit of a pain not to have printk. This patch enables the simulated console very early. It may be worth conditionalising on the command line... but this is enough for now. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Shaohua Li authored
The "ri" field in the processor status register only has defined values of 0, 1, 2. Do not let ptrace set this to 3. As with other reserved fields in registers we silently discard the value. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
David S. Miller authored
The underflow exception cases were wrong. This is one weird area of ieee1754 handling in that the underflow behavior changes based upon whether underflow is enabled in the trap enable mask of the FPU control register. As a specific case the Sparc V9 manual gives us the following description: -------------------- If UFM = 0: Underflow occurs if a nonzero result is tiny and a loss of accuracy occurs. Tininess may be detected before or after rounding. Loss of accuracy may be either a denormalization loss or an inexact result. If UFM = 1: Underflow occurs if a nonzero result is tiny. Tininess may be detected before or after rounding. -------------------- What this amounts to in the packing case is if we go subnormal, we set underflow if any of the following are true: 1) rounding sets inexact 2) we ended up rounding back up to normal (this is the case where we set the exponent to 1 and set the fraction to zero), this should set inexact too 3) underflow is set in FPU control register trap-enable mask The initially discovered example was "DBL_MIN / 16.0" which incorrectly generated an underflow. It should not, unless underflow is set in the trap-enable mask of the FPU csr. Another example, "0x0.0000000000001p-1022 / 16.0", should signal both inexact and underflow. The cpu implementations and ieee1754 literature is very clear about this. This is case #2 above. However, if underflow is set in the trap enable mask, only underflow should be set and reported as a trap. That is handled properly by the prioritization logic in arch/sparc{,64}/math-emu/math.c:record_exception(). Based upon a report and test case from Jakub Jelinek. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
A similar fix to netfilter from Eric Dumazet inspired me to look around a bit by using some grep/sed stuff as looking for this kind of bugs seemed easy to automate. This is one of them I found where it looks like this semicolon is not valid. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-