- 30 Jun, 2006 40 commits
-
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
The original driver had a restriction that if a card as an saa7113 chip, then it cannot have a CI interface. This is not the case. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Andrew de Quincey authored
These cards do not need the tda10021 configuration change when data is streamed through a CAM module. This disables it for these ones. Signed-off-by:
-
Trent Piepho authored
When someone added the front-end ioctl FE_SET_FRONTEND_TUNE_MODE, they forgot to set the return value to 0. It always returns EOPNOTSUPP, causing problems for programmers who actually check for error conditions. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Mike Isely authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Previously the pvrusb2 driver was conditionalizing printing of the device register / unregister messages against a debug mask. This sort of information should always appear, thus this patch. Signed-off-by:
-
Mauro Carvalho Chehab authored
The supported standards by the tuner on tveeprom were too restricted. It were showing just the main format, instead of the format family. Signed-off-by: -
Hans Verkuil authored
Many tda9887 settings depend on the chosen tuner. Expand the tuner parameters to include these tda9887 settings. Signed-off-by:
-
Randy Dunlap authored
Make 1-bit bitfields unsigned. Removes 68 sparse errors like these: drivers/media/video/videocodec.h:225:17: error: dubious one-bit signed bitfield drivers/media/video/msp3400-driver.h:93:32: error: dubious one-bit signed bitfield Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Michael Krufky authored
We should no longer try to load the tda9887 module, because it no longer exists. The tda9887 driver has been merged into the tuner module. This patch removes all instances of request_module("tda9887") from the following video4linux drivers: bttv, cx88, em28xx and saa7134. Signed-off-by:Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
This patch implements the newer v4l2 control features to make the standard user controls and mpeg encoder controls of cx88-blackbird video encoder boards available to userspace. Signed-off-by:
-
Andrew Morton authored
drivers/i2c/busses/i2c-i801.c: In function 'i801_probe': drivers/i2c/busses/i2c-i801.c:496: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Cc: Greg KH <greg@kroah.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Remove devfs leftovers. Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
J. Bruce Fields authored
Server-side implementation of rpcsec_gss privacy, which enables encryption of the payload of every rpc request and response. Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
J. Bruce Fields authored
Add a rq_sendfile_ok flag to svc_rqst which will be cleared in the privacy case so that the wrapping code will get copies of the read data instead of real page cache pages. This makes life simpler when we encrypt the response. Signed-off-by:
-
J. Bruce Fields authored
Pull out some of the integrity code into its own function, otherwise svcauth_gss_release() is going to become very ungainly after the addition of privacy code. Signed-off-by:
-
J. Bruce Fields authored
Since nfsv4 actually keeps around the file descriptors it gets from open (instead of just using them for a single read or write operation), we need to make sure that we can do RDWR opens and not just RDONLY/WRONLY. Signed-off-by:
-
J. Bruce Fields authored
These tests always returned true; clearly that wasn't what was intended. In keeping with kernel style, make them functions instead of macros while we're at it. Signed-off-by:
-
J. Bruce Fields authored
Adopt a simpler convention for gss_mech_put(), to simplify rsc_parse(). Signed-off-by:
-
David M. Richter authored
In the event that lookup_one_len() fails in nfsd_link(), fh_unlock() is skipped and locks are held overlong. Patch was tested on 2.6.17-rc2 by causing lookup_one_len() to fail and verifying that fh_unlock() gets called appropriately. Signed-off-by:
David M. Richter <richterd@citi.umich.edu> Signed-off-by:
-
J. Bruce Fields authored
We're checking nfs_in_grace here a few times when there isn't really any reason to--bad_stateid is probably the more sensible return value anyway. Signed-off-by:
-
J. Bruce Fields authored
In the typical v2/v3 case the only new filehandles used as arguments to operations are filehandles taken directly off the wire, which don't get dentries until fh_verify() is called. But in v4 the filehandles that are arguments to operations were often created by previous operations (putrootfh, lookup, etc.) using fh_compose, which sets the dentry in the filehandle without calling nfsd_setuser(). This also means that, for example, if filesystem B is mounted on filesystem A, and filesystem A is exported without root-squashing, then a client can bypass the rootsquashing on B using a compound that starts at a filehandle in A, crosses into B using lookups, and then does stuff in B. Signed-off-by:
-
J. Bruce Fields authored
Fix an improper unlock in an error path. Signed-off-by:
-
NeilBrown authored
nfsd tries to return to a client the same sort of filehandle as was used by the client. This removes some filehandle aliasing issues and means that a server upgrade followed by a downgrade will not confused clients not restarted during that time. However when crossing a mountpoint, the filehandle used for one filesystem doesn't provide any useful information on what sort of filehandle should be used on the other, and can provide misleading information. So if the reference filehandle is on a different filesystem to the one being generated, ignore it. Signed-off-by:
-
NeilBrown authored
There is a perfectly valid situation where fh_update gets called on an already uptodate filehandle - in nfsd_create_v3 where a CREATE_UNCHECKED finds an existing file and wants to just set the size. We could possible optimise out the call in that case, but the only harm involved is that fh_update prints a warning, so it is easier to remove the warning. Signed-off-by:
-
Frank Filz authored
Type '3' is used for the fsid in filehandles when the device number of the device holding the filesystem has more than 8 bits in either major or minor. Unfortunately expkey_parse doesn't recognise type 3. Fix this. (Slighty modified from Frank's original) Signed-off-by:
Frank Filz <ffilzlnx@us.ibm.com> Signed-off-by:
-
NeilBrown authored
Just testing the i_sb isn't really enough, at least the vfsmnt must be the same. Thanks Al. Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
-
Doug Thompson authored
Removed Dave Peterson as per his request as co-maintainer of EDAC Thanks Dave. Added Mark Gross as maintainer of edac-e752x driver Thanks Mark Signed-off-by:
Doug Thompson <norsk5@xmission.com> Signed-off-by:
Dave Peterson <dsp@llnl.gov> Signed-off-by:
Mark Gross <mark.gross@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Doug Thompson authored
- Add lower-level functions that handle various parts of the initialization done by the xxx_probe1() functions. Some of the xxx_probe1() functions are much too long and complicated (see "Chapter 5: Functions" in Documentation/CodingStyle). - Cleanup of probe1() functions in EDAC Signed-off-by:
-
Doug Thompson authored
Remove add_mc_to_global_list(). In next patch, this function will be reimplemented with different semantics. 1 Reimplement add_mc_to_global_list() with semantics that allow the caller to determine the ID number for a mem_ctl_info structure. Then modify edac_mc_add_mc() so that the caller specifies the ID number for the new mem_ctl_info structure. Platform-specific code should be able to assign the ID numbers in a platform-specific manner. For instance, on Opteron it makes sense to have the ID of the mem_ctl_info structure match the ID of the node that the memory controller belongs to. 2 Modify callers of edac_mc_add_mc() so they use the new semantics. Signed-off-by:
-
Doug Thompson authored
Change MC drivers from using CVS revision strings for their version number, Now each driver has its own local string. Remove some PCI dependencies from the core EDAC module. Made the code 'struct device' centric instead of 'struct pci_dev' Most of the code changes here are from a patch by Dave Jiang. It may be best to eventually move the PCI-specific code into a separate source file. Signed-off-by:
-
Matt LaPlante authored
Two typos in Documentation/IPMI. Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Josh Triplett authored
Add __acquire annotations to rcu_read_lock and rcu_read_lock_bh, and add __release annotations to rcu_read_unlock and rcu_read_unlock_bh. This allows sparse to detect improperly paired calls to these functions. Signed-off-by:
Josh Triplett <josh@freedesktop.org> Acked-by:
Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by:
-
Adrian Bunk authored
- make __cm206_init() __init (required since it calls the __init cm206_init()) - make the needlessly global bcdbin() static - remove a comment with an obsolete compile command Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Adrian Bunk authored
Don't show a menu that can't be entered due to lack of contents on arm (the options are only available on arm26). Signed-off-by:
Ian Molton <spyro@f2s.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrew Victor authored
This corrects the comments describing the 'enabled' and 'pending' flags in struct rtc_wkalrm of include/linux/rtc.h. Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Andrew Morton authored
Fix a bug identified by Zou Nan hai <nanhai.zou@intel.com>: If the system is in state SYSTEM_BOOTING, and need_resched() is true, cond_resched() returns true even though it didn't reschedule. Consequently need_resched() remains true and JBD locks up. Fix that by teaching cond_resched() to only return true if it really did call schedule(). cond_resched_lock() and cond_resched_softirq() have a problem too. If we're in SYSTEM_BOOTING state and need_resched() is true, these functions will drop the lock and will then try to call schedule(), but the SYSTEM_BOOTING state will prevent schedule() from being called. So on return, need_resched() will still be true, but cond_resched_lock() has to return 1 to tell the caller that the lock was dropped. The caller will probably lock up. Bottom line: if these functions dropped the lock, they _must_ call schedule() to clear need_resched(). Make it so. Also, uninline __cond_resched(). It's largeish, and slowpath. Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by:
-
Jeff Dike authored
The x86_64 build requires a definition for __raw_writeq. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
I run an x86_64 kernel with i386 userspace (Ubuntu Dapper) and decided to try out UML today. I found that UML wasn't quite aware of biarch compilers (which Ubuntu i386 ships). A fix similar to what was done for x86_64 should probably be committed (see http://marc.theaimsgroup.com/?l=linux-kernel&m=113425940204010&w=2). Without the FLAGS changes, the build will fail at a number of places and without the LINK change, the final link will fail. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Jeff Dike authored
Forgot to remove arch/um/kernel/time.c when it was mostly moved to arch/um/os-Linux. Signed-off-by:
-
