[SERIAL] turn serial semaphores into mutexes

Turn several drivers/serial/ semaphores-used-as-mutex into mutexes
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

drivers/serial/8250.c

@@ -41,6 +41,7 @@
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/nmi.h>
+#include <linux/mutex.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -2467,7 +2468,7 @@ static struct platform_device *serial8250_isa_devs;
  * 16x50 serial ports to be configured at run-time, to support PCMCIA
  * modems and PCI multiport cards.
  */
-static DECLARE_MUTEX(serial_sem);
+static DEFINE_MUTEX(serial_mutex);
 
 static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
 {
@@ -2522,7 +2523,7 @@ int serial8250_register_port(struct uart_port *port)
 	if (port->uartclk == 0)
 		return -EINVAL;
 
-	down(&serial_sem);
+	mutex_lock(&serial_mutex);
 
 	uart = serial8250_find_match_or_unused(port);
 	if (uart) {
@@ -2544,7 +2545,7 @@ int serial8250_register_port(struct uart_port *port)
 		if (ret == 0)
 			ret = uart->port.line;
 	}
-	up(&serial_sem);
+	mutex_unlock(&serial_mutex);
 
 	return ret;
 }
@@ -2561,7 +2562,7 @@ void serial8250_unregister_port(int line)
 {
 	struct uart_8250_port *uart = &serial8250_ports[line];
 
-	down(&serial_sem);
+	mutex_lock(&serial_mutex);
 	uart_remove_one_port(&serial8250_reg, &uart->port);
 	if (serial8250_isa_devs) {
 		uart->port.flags &= ~UPF_BOOT_AUTOCONF;
@@ -2571,7 +2572,7 @@ void serial8250_unregister_port(int line)
 	} else {
 		uart->port.dev = NULL;
 	}
-	up(&serial_sem);
+	mutex_unlock(&serial_mutex);
 }
 EXPORT_SYMBOL(serial8250_unregister_port);
 

drivers/serial/crisv10.c

@@ -442,6 +442,7 @@ static char *serial_version = "$Revision: 1.25 $";
 #include <linux/init.h>
 #include <asm/uaccess.h>
 #include <linux/kernel.h>
+#include <linux/mutex.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1315,11 +1316,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
  * memory if large numbers of serial ports are open.
  */
 static unsigned char *tmp_buf;
-#ifdef DECLARE_MUTEX
-static DECLARE_MUTEX(tmp_buf_sem);
-#else
-static struct semaphore tmp_buf_sem = MUTEX;
-#endif
+static DEFINE_MUTEX(tmp_buf_mutex);
 
 /* Calculate the chartime depending on baudrate, numbor of bits etc. */
 static void update_char_time(struct e100_serial * info)
@@ -3661,7 +3658,7 @@ rs_raw_write(struct tty_struct * tty, int from_user,
 	 * design.
 	 */
 	if (from_user) {
-		down(&tmp_buf_sem);
+		mutex_lock(&tmp_buf_mutex);
 		while (1) {
 			int c1;
 			c = CIRC_SPACE_TO_END(info->xmit.head,
@@ -3692,7 +3689,7 @@ rs_raw_write(struct tty_struct * tty, int from_user,
 			count -= c;
 			ret += c;
 		}
-		up(&tmp_buf_sem);
+		mutex_unlock(&tmp_buf_mutex);
 	} else {
 		cli();
 		while (count) {

drivers/serial/pmac_zilog.c

@@ -60,6 +60,7 @@
 #include <linux/pmu.h>
 #include <linux/bitops.h>
 #include <linux/sysrq.h>
+#include <linux/mutex.h>
 #include <asm/sections.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -96,7 +97,7 @@ MODULE_LICENSE("GPL");
  */
 static struct uart_pmac_port	pmz_ports[MAX_ZS_PORTS];
 static int			pmz_ports_count;
-static DECLARE_MUTEX(pmz_irq_sem);
+static DEFINE_MUTEX(pmz_irq_mutex);
 
 static struct uart_driver pmz_uart_reg = {
 	.owner		=	THIS_MODULE,
@@ -922,7 +923,7 @@ static int pmz_startup(struct uart_port *port)
 	if (uap->node == NULL)
 		return -ENODEV;
 
-	down(&pmz_irq_sem);
+	mutex_lock(&pmz_irq_mutex);
 
 	uap->flags |= PMACZILOG_FLAG_IS_OPEN;
 
@@ -940,11 +941,11 @@ static int pmz_startup(struct uart_port *port)
 		dev_err(&uap->dev->ofdev.dev,
 			"Unable to register zs interrupt handler.\n");
 		pmz_set_scc_power(uap, 0);
-		up(&pmz_irq_sem);
+		mutex_unlock(&pmz_irq_mutex);
 		return -ENXIO;
 	}
 
-	up(&pmz_irq_sem);
+	mutex_unlock(&pmz_irq_mutex);
 
 	/* Right now, we deal with delay by blocking here, I'll be
 	 * smarter later on
@@ -981,7 +982,7 @@ static void pmz_shutdown(struct uart_port *port)
 	if (uap->node == NULL)
 		return;
 
-	down(&pmz_irq_sem);
+	mutex_lock(&pmz_irq_mutex);
 
 	/* Release interrupt handler */
        	free_irq(uap->port.irq, uap);
@@ -1002,7 +1003,7 @@ static void pmz_shutdown(struct uart_port *port)
 
 	if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
 		spin_unlock_irqrestore(&port->lock, flags);
-		up(&pmz_irq_sem);
+		mutex_unlock(&pmz_irq_mutex);
 		return;
 	}
 
@@ -1019,7 +1020,7 @@ static void pmz_shutdown(struct uart_port *port)
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	up(&pmz_irq_sem);
+	mutex_unlock(&pmz_irq_mutex);
 
 	pmz_debug("pmz: shutdown() done.\n");
 }
@@ -1591,7 +1592,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 
 	state = pmz_uart_reg.state + uap->port.line;
 
-	down(&pmz_irq_sem);
+	mutex_lock(&pmz_irq_mutex);
 	down(&state->sem);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
@@ -1624,7 +1625,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 	pmz_set_scc_power(uap, 0);
 
 	up(&state->sem);
-	up(&pmz_irq_sem);
+	mutex_unlock(&pmz_irq_mutex);
 
 	pmz_debug("suspend, switching complete\n");
 
@@ -1651,7 +1652,7 @@ static int pmz_resume(struct macio_dev *mdev)
 
 	state = pmz_uart_reg.state + uap->port.line;
 
-	down(&pmz_irq_sem);
+	mutex_lock(&pmz_irq_mutex);
 	down(&state->sem);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
@@ -1685,7 +1686,7 @@ static int pmz_resume(struct macio_dev *mdev)
 
  bail:
 	up(&state->sem);
-	up(&pmz_irq_sem);
+	mutex_unlock(&pmz_irq_mutex);
 
 	/* Right now, we deal with delay by blocking here, I'll be
 	 * smarter later on

drivers/serial/serial_core.c

@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
 #include <linux/delay.h>
+#include <linux/mutex.h>
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -47,7 +48,7 @@
 /*
  * This is used to lock changes in serial line configuration.
  */
-static DECLARE_MUTEX(port_sem);
+static DEFINE_MUTEX(port_mutex);
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
@@ -1472,7 +1473,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
 	struct uart_state *state;
 
-	down(&port_sem);
+	mutex_lock(&port_mutex);
 	state = drv->state + line;
 	if (down_interruptible(&state->sem)) {
 		state = ERR_PTR(-ERESTARTSYS);
@@ -1509,7 +1510,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 	}
 
  out:
-	up(&port_sem);
+	mutex_unlock(&port_mutex);
 	return state;
 }
 
@@ -2219,7 +2220,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 
 	state = drv->state + port->line;
 
-	down(&port_sem);
+	mutex_lock(&port_mutex);
 	if (state->port) {
 		ret = -EINVAL;
 		goto out;
@@ -2255,7 +2256,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 		register_console(port->cons);
 
  out:
-	up(&port_sem);
+	mutex_unlock(&port_mutex);
 
 	return ret;
 }
@@ -2279,7 +2280,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 		printk(KERN_ALERT "Removing wrong port: %p != %p\n",
 			state->port, port);
 
-	down(&port_sem);
+	mutex_lock(&port_mutex);
 
 	/*
 	 * Remove the devices from devfs
@@ -2288,7 +2289,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 
 	uart_unconfigure_port(drv, state);
 	state->port = NULL;
-	up(&port_sem);
+	mutex_unlock(&port_mutex);
 
 	return 0;
 }

drivers/serial/serial_txx9.c

@@ -52,6 +52,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/mutex.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1018,7 +1019,7 @@ static void serial_txx9_resume_port(int line)
 	uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
 }
 
-static DECLARE_MUTEX(serial_txx9_sem);
+static DEFINE_MUTEX(serial_txx9_mutex);
 
 /**
  *	serial_txx9_register_port - register a serial port
@@ -1037,7 +1038,7 @@ static int __devinit serial_txx9_register_port(struct uart_port *port)
 	struct uart_txx9_port *uart;
 	int ret = -ENOSPC;
 
-	down(&serial_txx9_sem);
+	mutex_lock(&serial_txx9_mutex);
 	for (i = 0; i < UART_NR; i++) {
 		uart = &serial_txx9_ports[i];
 		if (uart->port.type == PORT_UNKNOWN)
@@ -1058,7 +1059,7 @@ static int __devinit serial_txx9_register_port(struct uart_port *port)
 		if (ret == 0)
 			ret = uart->port.line;
 	}
-	up(&serial_txx9_sem);
+	mutex_unlock(&serial_txx9_mutex);
 	return ret;
 }
 
@@ -1073,7 +1074,7 @@ static void __devexit serial_txx9_unregister_port(int line)
 {
 	struct uart_txx9_port *uart = &serial_txx9_ports[line];
 
-	down(&serial_txx9_sem);
+	mutex_lock(&serial_txx9_mutex);
 	uart_remove_one_port(&serial_txx9_reg, &uart->port);
 	uart->port.flags = 0;
 	uart->port.type = PORT_UNKNOWN;
@@ -1082,7 +1083,7 @@ static void __devexit serial_txx9_unregister_port(int line)
 	uart->port.membase = 0;
 	uart->port.dev = NULL;
 	uart_add_one_port(&serial_txx9_reg, &uart->port);
-	up(&serial_txx9_sem);
+	mutex_unlock(&serial_txx9_mutex);
 }
 
 /*