[POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus

MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate
fixed-link property in the device tree.

If not, ethernet will not work:
  e0024520:03 not found
  eth1: Could not attach to PHY
  IP-Config: Failed to open eth1
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8377_rdb.dts

@@ -164,12 +164,6 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
 		};
 
 		enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
-			phy-handle = <&phy3>;
+			fixed-link = <1 1 1000 0 0>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8378_rdb.dts

@@ -164,12 +164,6 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
 		};
 
 		enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
-			phy-handle = <&phy3>;
+			fixed-link = <1 1 1000 0 0>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8379_rdb.dts

@@ -164,12 +164,6 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
 		};
 
 		enet0: ethernet@24000 {
@@ -195,7 +189,7 @@
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
-			phy-handle = <&phy3>;
+			fixed-link = <1 1 1000 0 0>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/configs/83xx/mpc837x_rdb_defconfig

 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:29 2008
+# Tue Jun 10 09:17:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -454,7 +454,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y