Commit f1410647 authored by Eliezer Tamir's avatar Eliezer Tamir Committed by David S. Miller

[BNX2X]: Correct Link management

Properly protect PHY access between two devices on the same board with
a HW lock.

Use GPIO to clear all previous configurations before changing link
parameters.

Shut down the external PHY in case of fan failure.

Reducing the MDC/MDIO clock to 2.5MHz due to problems with some
devices.

Resolve the flow control response according to autoneg with external
PHY.

Unmasking all PHY interrupts in single write to prevent a race in the
interrupts order.

LASI indication fixes to work with peculiarities of PHYs.

Disable MAC RX to avoid a HW bug when closing the MAC under traffic.

Disable parallel detection on HiGig due to HW limitation.

Updating the shared memory structure to work with the current
bootcode.
Signed-off-by: default avatarEliezer Tamir <eliezert@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 25047950
This diff is collapsed.
...@@ -24,6 +24,8 @@ ...@@ -24,6 +24,8 @@
#define BNX2X_MSG_STATS 0x20000 /* was: NETIF_MSG_TIMER */ #define BNX2X_MSG_STATS 0x20000 /* was: NETIF_MSG_TIMER */
#define NETIF_MSG_NVM 0x40000 /* was: NETIF_MSG_HW */ #define NETIF_MSG_NVM 0x40000 /* was: NETIF_MSG_HW */
#define NETIF_MSG_DMAE 0x80000 /* was: NETIF_MSG_HW */ #define NETIF_MSG_DMAE 0x80000 /* was: NETIF_MSG_HW */
#define BNX2X_MSG_SP 0x100000 /* was: NETIF_MSG_INTR */
#define BNX2X_MSG_FP 0x200000 /* was: NETIF_MSG_INTR */
#define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */ #define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */
...@@ -40,6 +42,12 @@ ...@@ -40,6 +42,12 @@
__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \ __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
} while (0) } while (0)
/* for logging (never masked) */
#define BNX2X_LOG(__fmt, __args...) do { \
printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \
__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
} while (0)
/* before we have a dev->name use dev_info() */ /* before we have a dev->name use dev_info() */
#define BNX2X_DEV_INFO(__fmt, __args...) do { \ #define BNX2X_DEV_INFO(__fmt, __args...) do { \
if (bp->msglevel & NETIF_MSG_PROBE) \ if (bp->msglevel & NETIF_MSG_PROBE) \
...@@ -574,7 +582,8 @@ struct bnx2x { ...@@ -574,7 +582,8 @@ struct bnx2x {
u32 fw_mb; u32 fw_mb;
u32 hw_config; u32 hw_config;
u32 serdes_config; u32 board;
u32 serdes_config;
u32 lane_config; u32 lane_config;
u32 ext_phy_config; u32 ext_phy_config;
#define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \ #define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \
...@@ -595,11 +604,11 @@ struct bnx2x { ...@@ -595,11 +604,11 @@ struct bnx2x {
u8 tx_lane_swap; u8 tx_lane_swap;
u8 link_up; u8 link_up;
u8 phy_link_up;
u32 supported; u32 supported;
/* link settings - missing defines */ /* link settings - missing defines */
#define SUPPORTED_2500baseT_Full (1 << 15) #define SUPPORTED_2500baseT_Full (1 << 15)
#define SUPPORTED_CX4 (1 << 16)
u32 phy_flags; u32 phy_flags;
/*#define PHY_SERDES_FLAG 0x1*/ /*#define PHY_SERDES_FLAG 0x1*/
...@@ -644,16 +653,9 @@ struct bnx2x { ...@@ -644,16 +653,9 @@ struct bnx2x {
#define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH #define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
#define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE #define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
u32 pause_mode;
#define PAUSE_NONE 0
#define PAUSE_SYMMETRIC 1
#define PAUSE_ASYMMETRIC 2
#define PAUSE_BOTH 3
u32 advertising; u32 advertising;
/* link settings - missing defines */ /* link settings - missing defines */
#define ADVERTISED_2500baseT_Full (1 << 15) #define ADVERTISED_2500baseT_Full (1 << 15)
#define ADVERTISED_CX4 (1 << 16)
u32 link_status; u32 link_status;
u32 line_speed; u32 line_speed;
...@@ -667,6 +669,8 @@ struct bnx2x { ...@@ -667,6 +669,8 @@ struct bnx2x {
#define NVRAM_TIMEOUT_COUNT 30000 #define NVRAM_TIMEOUT_COUNT 30000
#define NVRAM_PAGE_SIZE 256 #define NVRAM_PAGE_SIZE 256
u8 wol;
int rx_ring_size; int rx_ring_size;
u16 tx_quick_cons_trip_int; u16 tx_quick_cons_trip_int;
...@@ -718,9 +722,6 @@ struct bnx2x { ...@@ -718,9 +722,6 @@ struct bnx2x {
#endif #endif
char *name; char *name;
u16 bus_speed_mhz;
u8 wol;
u8 pad;
/* used to synchronize stats collecting */ /* used to synchronize stats collecting */
int stats_state; int stats_state;
...@@ -873,6 +874,7 @@ struct bnx2x { ...@@ -873,6 +874,7 @@ struct bnx2x {
#define PCICFG_LINK_SPEED 0xf0000 #define PCICFG_LINK_SPEED 0xf0000
#define PCICFG_LINK_SPEED_SHIFT 16 #define PCICFG_LINK_SPEED_SHIFT 16
#define BMAC_CONTROL_RX_ENABLE 2
/* stuff added to make the code fit 80Col */ /* stuff added to make the code fit 80Col */
#define TPA_TYPE_START ETH_FAST_PATH_RX_CQE_START_FLG #define TPA_TYPE_START ETH_FAST_PATH_RX_CQE_START_FLG
...@@ -944,13 +946,13 @@ struct bnx2x { ...@@ -944,13 +946,13 @@ struct bnx2x {
#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD #define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD #define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \ #define NIG_STATUS_XGXS0_LINK10G \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
#define NIG_XGXS0_LINK_STATUS \ #define NIG_STATUS_XGXS0_LINK_STATUS \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
#define NIG_XGXS0_LINK_STATUS_SIZE \ #define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
#define NIG_SERDES0_LINK_STATUS \ #define NIG_STATUS_SERDES0_LINK_STATUS \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
#define NIG_MASK_MI_INT \ #define NIG_MASK_MI_INT \
NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
......
/* bnx2x_fw_defs.h: Broadcom Everest network driver. /* bnx2x_fw_defs.h: Broadcom Everest network driver.
* *
* Copyright (c) 2007 Broadcom Corporation * Copyright (c) 2007-2008 Broadcom Corporation
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
......
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment