Commit ef6f0d1f authored by Pete Popov's avatar Pete Popov Committed by Thomas Gleixner

[MTD] NAND: Alchemy board driver cleanup

- cleaned up the partitions and include files
- added more flexible CS and address detection and setup

Regression tested on db1200 and db1550.
Signed-off-by: default avatarPete Popov <ppopov@pacbell.net>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent 733802d9
# drivers/mtd/nand/Kconfig
# $Id: Kconfig,v 1.31 2005/06/20 12:03:21 bjd Exp $
# $Id: Kconfig,v 1.34 2005/09/23 01:44:55 ppopov Exp $
menu "NAND Flash Device Drivers"
depends on MTD!=n
......@@ -59,8 +59,8 @@ config MTD_NAND_IDS
tristate
config MTD_NAND_AU1550
tristate "Au1550 NAND support"
depends on SOC_AU1550 && MTD_NAND
tristate "Au1550/1200 NAND support"
depends on (SOC_AU1200 || SOC_AU1550) && MTD_NAND
help
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
......
......@@ -3,7 +3,7 @@
*
* Copyright (C) 2004 Embedded Edge, LLC
*
* $Id: au1550nd.c,v 1.11 2004/11/04 12:53:10 gleixner Exp $
* $Id: au1550nd.c,v 1.12 2005/09/23 01:44:55 ppopov Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -21,13 +21,7 @@
/* fixme: this is ugly */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1550
#include <asm/mach-pb1x00/pb1550.h>
#endif
#ifdef CONFIG_MIPS_DB1550
#include <asm/mach-db1x00/db1x00.h>
#endif
#include <asm/mach-au1x00/au1xxx.h>
#else
#include <asm/au1000.h>
#ifdef CONFIG_MIPS_PB1550
......@@ -45,39 +39,22 @@ static struct mtd_info *au1550_mtd = NULL;
static void __iomem *p_nand;
static int nand_width = 1; /* default x8*/
#define NAND_CS 1
/*
* Define partitions for flash device
*/
const static struct mtd_partition partition_info[] = {
#ifdef CONFIG_MIPS_PB1550
#define NUM_PARTITIONS 2
{
.name = "Pb1550 NAND FS 0",
.offset = 0,
.size = 8*1024*1024
},
{
.name = "Pb1550 NAND FS 1",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
}
#endif
#ifdef CONFIG_MIPS_DB1550
#define NUM_PARTITIONS 2
{
.name = "Db1550 NAND FS 0",
.name = "NAND FS 0",
.offset = 0,
.size = 8*1024*1024
.size = 8*1024*1024
},
{
.name = "Db1550 NAND FS 1",
.name = "NAND FS 1",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
.size = MTDPART_SIZ_FULL
}
#endif
};
#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
/**
......@@ -339,11 +316,13 @@ int au1550_device_ready(struct mtd_info *mtd)
/*
* Main initialization routine
*/
int __init au1550_init (void)
int __init au1xxx_nand_init (void)
{
struct nand_chip *this;
u16 boot_swapboot = 0; /* default value */
int retval;
u32 mem_staddr;
u32 nand_phys;
/* Allocate memory for MTD device structure and private data */
au1550_mtd = kmalloc (sizeof(struct mtd_info) +
......@@ -364,8 +343,11 @@ int __init au1550_init (void)
au1550_mtd->priv = this;
/* MEM_STNDCTL: disable ints, disable nand boot */
au_writel(0, MEM_STNDCTL);
/* disable interrupts */
au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
/* disable NAND boot */
au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
#ifdef CONFIG_MIPS_PB1550
/* set gpio206 high */
......@@ -397,19 +379,60 @@ int __init au1550_init (void)
}
#endif
/* Configure RCE1 - should be done by YAMON */
au_writel(0x5 | (nand_width << 22), 0xB4001010); /* MEM_STCFG1 */
au_writel(NAND_TIMING, 0xB4001014); /* MEM_STTIME1 */
au_sync();
/* Configure chip-select; normally done by boot code, e.g. YAMON */
#ifdef NAND_STCFG
if (NAND_CS == 0) {
au_writel(NAND_STCFG, MEM_STCFG0);
au_writel(NAND_STTIME, MEM_STTIME0);
au_writel(NAND_STADDR, MEM_STADDR0);
}
if (NAND_CS == 1) {
au_writel(NAND_STCFG, MEM_STCFG1);
au_writel(NAND_STTIME, MEM_STTIME1);
au_writel(NAND_STADDR, MEM_STADDR1);
}
if (NAND_CS == 2) {
au_writel(NAND_STCFG, MEM_STCFG2);
au_writel(NAND_STTIME, MEM_STTIME2);
au_writel(NAND_STADDR, MEM_STADDR2);
}
if (NAND_CS == 3) {
au_writel(NAND_STCFG, MEM_STCFG3);
au_writel(NAND_STTIME, MEM_STTIME3);
au_writel(NAND_STADDR, MEM_STADDR3);
}
#endif
/* Locate NAND chip-select in order to determine NAND phys address */
mem_staddr = 0x00000000;
if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
mem_staddr = au_readl(MEM_STADDR0);
else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
mem_staddr = au_readl(MEM_STADDR1);
else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
mem_staddr = au_readl(MEM_STADDR2);
else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
mem_staddr = au_readl(MEM_STADDR3);
if (mem_staddr == 0x00000000) {
printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
kfree(au1550_mtd);
return 1;
}
nand_phys = (mem_staddr << 4) & 0xFFFC0000;
/* setup and enable chip select, MEM_STADDR1 */
/* we really need to decode offsets only up till 0x20 */
au_writel((1<<28) | (NAND_PHYS_ADDR>>4) |
(((NAND_PHYS_ADDR + 0x1000)-1) & (0x3fff<<18)>>18),
MEM_STADDR1);
au_sync();
p_nand = (void __iomem *)ioremap(nand_phys, 0x1000);
/* make controller and MTD agree */
if (NAND_CS == 0)
nand_width = au_readl(MEM_STCFG0) & (1<<22);
if (NAND_CS == 1)
nand_width = au_readl(MEM_STCFG1) & (1<<22);
if (NAND_CS == 2)
nand_width = au_readl(MEM_STCFG2) & (1<<22);
if (NAND_CS == 3)
nand_width = au_readl(MEM_STCFG3) & (1<<22);
p_nand = ioremap(NAND_PHYS_ADDR, 0x1000);
/* Set address of hardware control function */
this->hwcontrol = au1550_hwcontrol;
......@@ -438,7 +461,7 @@ int __init au1550_init (void)
}
/* Register the partitions */
add_mtd_partitions(au1550_mtd, partition_info, NUM_PARTITIONS);
add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info));
return 0;
......@@ -450,7 +473,7 @@ int __init au1550_init (void)
return retval;
}
module_init(au1550_init);
module_init(au1xxx_nand_init);
/*
* Clean up routine
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment