Commit eaf76e0d authored by Stefan Richter's avatar Stefan Richter

firewire: sbp2: provide fallback if mgt_ORB_timeout is missing

The Unit_Characteristics entry of an SBP-2 unit directory is not
mandatory as far as I can tell.  If it is missing, we would probably
fail to log in into the target because firewire-sbp2 would not wait for
status after it sent the login request.

The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it
is executed exactly once before login, rather than 0..n times depending
on the target's config ROM.  With targets with one or more
Unit_Characteristics entries, the result is the same as before.
Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
parent 544df55d
......@@ -188,14 +188,7 @@ static struct fw_device *target_device(struct sbp2_target *tgt)
/* Impossible login_id, to detect logout attempt before successful login */
#define INVALID_LOGIN_ID 0x10000
/*
* Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
* provided in the config rom. Most devices do provide a value, which
* we'll use for login management orbs, but with some sane limits.
*/
#define SBP2_MIN_LOGIN_ORB_TIMEOUT 5000U /* Timeout in ms */
#define SBP2_MAX_LOGIN_ORB_TIMEOUT 40000U /* Timeout in ms */
#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
#define SBP2_ORB_NULL 0x80000000
#define SBP2_RETRY_LIMIT 0xf /* 15 retries */
#define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */
......@@ -1034,7 +1027,6 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
{
struct fw_csr_iterator ci;
int key, value;
unsigned int timeout;
fw_csr_iterator_init(&ci, directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
......@@ -1059,17 +1051,7 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
case SBP2_CSR_UNIT_CHARACTERISTICS:
/* the timeout value is stored in 500ms units */
timeout = ((unsigned int) value >> 8 & 0xff) * 500;
timeout = max(timeout, SBP2_MIN_LOGIN_ORB_TIMEOUT);
tgt->mgt_orb_timeout =
min(timeout, SBP2_MAX_LOGIN_ORB_TIMEOUT);
if (timeout > tgt->mgt_orb_timeout)
fw_notify("%s: config rom contains %ds "
"management ORB timeout, limiting "
"to %ds\n", tgt->bus_id,
timeout / 1000,
tgt->mgt_orb_timeout / 1000);
tgt->mgt_orb_timeout = (value >> 8 & 0xff) * 500;
break;
case SBP2_CSR_LOGICAL_UNIT_NUMBER:
......@@ -1087,6 +1069,22 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
return 0;
}
/*
* Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
* provided in the config rom. Most devices do provide a value, which
* we'll use for login management orbs, but with some sane limits.
*/
static void sbp2_clamp_management_orb_timeout(struct sbp2_target *tgt)
{
unsigned int timeout = tgt->mgt_orb_timeout;
if (timeout > 40000)
fw_notify("%s: %ds mgt_ORB_timeout limited to 40s\n",
tgt->bus_id, timeout / 1000);
tgt->mgt_orb_timeout = clamp_val(timeout, 5000, 40000);
}
static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
u32 firmware_revision)
{
......@@ -1171,6 +1169,7 @@ static int sbp2_probe(struct device *dev)
&firmware_revision) < 0)
goto fail_tgt_put;
sbp2_clamp_management_orb_timeout(tgt);
sbp2_init_workarounds(tgt, model, firmware_revision);
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment