Commit e6a3b616 authored by Tobias Doerffel's avatar Tobias Doerffel Committed by John W. Linville

ath5k: added cfg80211 based rfkill support

This patch introduces initial rfkill support for the ath5k driver
based on rfkill support in the cfg80211 framework.
All rfkill related code is separated into newly created rfkill.c.

Changes to existing code are minimal:

* added a new data structure ath5k_rfkill to the ath5k_softc structure
* inserted calls to HW rfkill init/deinit routines
* ath5k_intr() has been extended to handle AR5K_INT_GPIO interrupts
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 207ee162
......@@ -39,3 +39,11 @@ config ATH5K_DEBUG
modprobe ath5k debug=0x00000400
config ATH5K_RFKILL
bool "Atheros 5xxx rfkill support"
depends on ATH5K
default y
---help---
Include support for enabling/disabling WiFi via rfkill switch
with Atheros 5xxx cards
......@@ -12,4 +12,5 @@ ath5k-y += attach.o
ath5k-y += base.o
ath5k-y += led.o
ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o
ath5k-$(CONFIG_ATH5K_RFKILL) += rfkill.o
obj-$(CONFIG_ATH5K) += ath5k.o
......@@ -1256,6 +1256,15 @@ extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
/* rfkill Functions */
#ifdef CONFIG_ATH5K_RFKILL
extern void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
extern void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
#else
static inline void ath5k_rfkill_hw_start(struct ath5k_hw *ah) {}
static inline void ath5k_rfkill_hw_stop(struct ath5k_hw *ah) {}
#endif
/* Misc functions */
int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
......
......@@ -2360,6 +2360,8 @@ ath5k_init(struct ath5k_softc *sc)
if (ret)
goto done;
ath5k_rfkill_hw_start(ah);
/*
* Reset the key cache since some parts do not reset the
* contents on initial power up or resume from suspend.
......@@ -2468,6 +2470,8 @@ ath5k_stop_hw(struct ath5k_softc *sc)
tasklet_kill(&sc->restq);
tasklet_kill(&sc->beacontq);
ath5k_rfkill_hw_stop(sc->ah);
return ret;
}
......@@ -2526,6 +2530,12 @@ ath5k_intr(int irq, void *dev_id)
*/
ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
}
#ifdef CONFIG_ATH5K_RFKILL
if (status & AR5K_INT_GPIO)
{
tasklet_schedule(&sc->rf_kill.toggleq);
}
#endif
}
} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
......
......@@ -46,6 +46,7 @@
#include <linux/wireless.h>
#include <linux/if_ether.h>
#include <linux/leds.h>
#include <linux/rfkill.h>
#include "ath5k.h"
#include "debug.h"
......@@ -91,6 +92,15 @@ struct ath5k_led
struct led_classdev led_dev; /* led classdev */
};
/* Rfkill */
struct ath5k_rfkill {
/* GPIO PIN for rfkill */
u16 gpio;
/* polarity of rfkill GPIO PIN */
bool polarity;
/* RFKILL toggle tasklet */
struct tasklet_struct toggleq;
};
#if CHAN_DEBUG
#define ATH_CHAN_MAX (26+26+26+200+200)
......@@ -167,6 +177,10 @@ struct ath5k_softc {
struct tasklet_struct txtq; /* tx intr tasklet */
struct ath5k_led tx_led; /* tx led */
#ifdef CONFIG_ATH5K_RFKILL
struct ath5k_rfkill rf_kill;
#endif
spinlock_t block; /* protects beacon */
struct tasklet_struct beacontq; /* beacon intr tasklet */
struct ath5k_buf *bbuf; /* beacon buffer */
......
......@@ -1304,23 +1304,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
if (ah->ah_version != AR5K_AR5210)
ath5k_hw_set_imr(ah, ah->ah_imr);
/*
* Setup RFKill interrupt if rfkill flag is set on eeprom.
* TODO: Use gpio pin and polarity infos from eeprom
* TODO: Handle this in ath5k_intr because it'll result
* a nasty interrupt storm.
*/
#if 0
if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
ath5k_hw_set_gpio_input(ah, 0);
ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
if (ah->ah_gpio[0] == 0)
ath5k_hw_set_gpio_intr(ah, 0, 1);
else
ath5k_hw_set_gpio_intr(ah, 0, 0);
}
#endif
/* Enable 32KHz clock function for AR5212+ chips
* Set clocks to 32KHz operation and use an
* external 32KHz crystal when sleeping if one
......
/*
* RFKILL support for ath5k
*
* Copyright (c) 2009 Tobias Doerffel <tobias.doerffel@gmail.com>
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
#include "base.h"
static inline void ath5k_rfkill_disable(struct ath5k_softc *sc)
{
ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill disable (gpio:%d polarity:%d)\n",
sc->rf_kill.gpio, sc->rf_kill.polarity);
ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio);
ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, !sc->rf_kill.polarity);
}
static inline void ath5k_rfkill_enable(struct ath5k_softc *sc)
{
ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill enable (gpio:%d polarity:%d)\n",
sc->rf_kill.gpio, sc->rf_kill.polarity);
ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio);
ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, sc->rf_kill.polarity);
}
static inline void ath5k_rfkill_set_intr(struct ath5k_softc *sc, bool enable)
{
struct ath5k_hw *ah = sc->ah;
ath5k_hw_set_gpio_input(ah, sc->rf_kill.gpio);
ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, sc->rf_kill.gpio);
ath5k_hw_set_gpio_intr(ah, sc->rf_kill.gpio, enable ?
!!ah->ah_gpio[0] : !ah->ah_gpio[0]);
}
static bool
ath5k_is_rfkill_set(struct ath5k_softc *sc)
{
/* configuring GPIO for input for some reason disables rfkill */
/*ath5k_hw_set_gpio_input(sc->ah, sc->rf_kill.gpio);*/
return ath5k_hw_get_gpio(sc->ah, sc->rf_kill.gpio) ==
sc->rf_kill.polarity;
}
static void
ath5k_tasklet_rfkill_toggle(unsigned long data)
{
struct ath5k_softc *sc = (void *)data;
bool blocked;
blocked = ath5k_is_rfkill_set(sc);
wiphy_rfkill_set_hw_state(sc->hw->wiphy, blocked);
}
void
ath5k_rfkill_hw_start(struct ath5k_hw *ah)
{
struct ath5k_softc *sc = ah->ah_sc;
/* read rfkill GPIO configuration from EEPROM header */
sc->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin;
sc->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol;
tasklet_init(&sc->rf_kill.toggleq, ath5k_tasklet_rfkill_toggle,
(unsigned long)sc);
ath5k_rfkill_disable(sc);
/* enable interrupt for rfkill switch */
if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
ath5k_rfkill_set_intr(sc, true);
}
}
void
ath5k_rfkill_hw_stop(struct ath5k_hw *ah)
{
struct ath5k_softc *sc = ah->ah_sc;
/* disable interrupt for rfkill switch */
if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
ath5k_rfkill_set_intr(sc, false);
}
tasklet_kill(&sc->rf_kill.toggleq);
/* enable RFKILL when stopping HW so Wifi LED is turned off */
ath5k_rfkill_enable(sc);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment