Commit e4d222ff authored by David Woodhouse's avatar David Woodhouse

[MTD] Remove PCI dependency for Geode CS553[56] NAND controller.

PCI is faked on these devices by SMM traps. Don't depend on that --
check for the chipset directly instead.
Signed-off-by: default avatarDavid Woodhouse <dwmw2@infradead.org>
parent 89291a9d
......@@ -211,7 +211,7 @@ config MTD_NAND_SHARPSL
config MTD_NAND_CS553X
tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
depends on MTD_NAND && X86_PC && PCI
depends on MTD_NAND && (X86_PC || X86_GENERICARCH)
help
The CS553x companion chips for the AMD Geode processor
include NAND flash controllers with built-in hardware ECC
......
......@@ -31,6 +31,10 @@
#define NR_CS553X_CONTROLLERS 4
#define MSR_DIVIL_GLD_CAP 0x51400000 /* DIVIL capabilitiies */
#define CAP_CS5535 0x2df000ULL
#define CAP_CS5536 0x5df500ULL
/* NAND Timing MSRs */
#define MSR_NANDF_DATA 0x5140001b /* NAND Flash Data Timing MSR */
#define MSR_NANDF_CTL 0x5140001c /* NAND Flash Control Timing */
......@@ -252,17 +256,40 @@ out:
return err;
}
static int is_geode(void)
{
/* These are the CPUs which will have a CS553[56] companion chip */
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 == 5 &&
boot_cpu_data.x86_model == 10)
return 1; /* Geode LX */
if ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC ||
boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX) &&
boot_cpu_data.x86 == 5 &&
boot_cpu_data.x86_model == 5)
return 1; /* Geode GX (née GX2) */
return 0;
}
static int __init cs553x_init(void)
{
int err = -ENXIO;
int i;
uint64_t val;
/* Check whether we actually have a CS5535 or CS5536 */
if (!pci_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, NULL) &&
!pci_find_device(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA, NULL))
/* If the CPU isn't a Geode GX or LX, abort */
if (!is_geode())
return -ENXIO;
/* If it doesn't have the CS553[56], abort */
rdmsrl(MSR_DIVIL_GLD_CAP, val);
val &= ~0xFFULL;
if (val != CAP_CS5535 && val != CAP_CS5536)
return -ENXIO;
/* If it doesn't have the NAND controller enabled, abort */
rdmsrl(MSR_DIVIL_BALL_OPTS, val);
if (val & 1) {
printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment