igb: add pf side of VMDq support

Add the pf portion of vmdq support.  This provides enough support so that
VMDq is enabled, and the pf is functional without enabling vfs.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/igb/e1000_82575.h

@@ -40,8 +40,11 @@ extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
 #define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT                 2  /* Shift _left_ */
 #define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF                0x02000000
 #define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS          0x0A000000
+#define E1000_SRRCTL_DROP_EN                            0x80000000
 
 #define E1000_MRQC_ENABLE_RSS_4Q            0x00000002
+#define E1000_MRQC_ENABLE_VMDQ              0x00000003
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q       0x00000005
 #define E1000_MRQC_RSS_FIELD_IPV4_UDP       0x00400000
 #define E1000_MRQC_RSS_FIELD_IPV6_UDP       0x00800000
 #define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX    0x01000000
@@ -159,4 +162,27 @@ struct e1000_adv_tx_context_desc {
 #define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
 #define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
 
+/* Easy defines for setting default pool, would normally be left a zero */
+#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
+#define E1000_VT_CTL_DEFAULT_POOL_MASK  (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
+
+/* Other useful VMD_CTL register defines */
+#define E1000_VT_CTL_IGNORE_MAC         (1 << 28)
+#define E1000_VT_CTL_DISABLE_DEF_POOL   (1 << 29)
+#define E1000_VT_CTL_VM_REPL_EN         (1 << 30)
+
+/* Per VM Offload register setup */
+#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
+#define E1000_VMOLR_LPE        0x00010000 /* Accept Long packet */
+#define E1000_VMOLR_RSSE       0x00020000 /* Enable RSS */
+#define E1000_VMOLR_AUPE       0x01000000 /* Accept untagged packets */
+#define E1000_VMOLR_ROMPE      0x02000000 /* Accept overflow multicast */
+#define E1000_VMOLR_ROPE       0x04000000 /* Accept overflow unicast */
+#define E1000_VMOLR_BAM        0x08000000 /* Accept Broadcast packets */
+#define E1000_VMOLR_MPME       0x10000000 /* Multicast promiscuous mode */
+#define E1000_VMOLR_STRVLAN    0x40000000 /* Vlan stripping enable */
+
+#define ALL_QUEUES   0xFFFF
+
+
 #endif

drivers/net/igb/e1000_defines.h

@@ -399,6 +399,8 @@
 #define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
 #define E1000_RAL_MAC_ADDR_LEN 4
 #define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAH_POOL_MASK 0x03FC0000
+#define E1000_RAH_POOL_1 0x00040000
 
 /* Error Codes */
 #define E1000_ERR_NVM      1

drivers/net/igb/e1000_regs.h

@@ -292,7 +292,7 @@ enum {
 #define E1000_RAH(_i)  (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
                                        (0x054E4 + ((_i - 16) * 8)))
 #define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
-#define E1000_VMD_CTL  0x0581C  /* VMDq Control - RW */
+#define E1000_VT_CTL   0x0581C  /* VMDq Control - RW */
 #define E1000_WUC      0x05800  /* Wakeup Control - RW */
 #define E1000_WUFC     0x05808  /* Wakeup Filter Control - RW */
 #define E1000_WUS      0x05810  /* Wakeup Status - RO */
@@ -320,6 +320,11 @@ enum {
 #define E1000_RETA(_i)  (0x05C00 + ((_i) * 4))
 #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
 
+/* VT Registers */
+#define E1000_QDE       0x02408 /* Queue Drop Enable - RW */
+/* These act per VF so an array friendly macro is used */
+#define E1000_VMOLR(_n)        (0x05AD0 + (4 * (_n)))
+
 #define wr32(reg, value) (writel(value, hw->hw_addr + reg))
 #define rd32(reg) (readl(hw->hw_addr + reg))
 #define wrfl() ((void)rd32(E1000_STATUS))

drivers/net/igb/igb.h

@@ -88,8 +88,7 @@ struct igb_adapter;
 #define IGB_RXBUFFER_2048  2048
 #define IGB_RXBUFFER_16384 16384
 
-/* Packet Buffer allocations */
-
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
 
 /* How many Tx Descriptors do we need to call netif_wake_queue ? */
 #define IGB_TX_QUEUE_WAKE	16

drivers/net/igb/igb_ethtool.c

@@ -398,7 +398,7 @@ static void igb_get_regs(struct net_device *netdev,
 	regs_buff[34] = rd32(E1000_RLPML);
 	regs_buff[35] = rd32(E1000_RFCTL);
 	regs_buff[36] = rd32(E1000_MRQC);
-	regs_buff[37] = rd32(E1000_VMD_CTL);
+	regs_buff[37] = rd32(E1000_VT_CTL);
 
 	/* Transmit */
 	regs_buff[38] = rd32(E1000_TCTL);

drivers/net/igb/igb_main.c

@@ -122,6 +122,10 @@ static void igb_vlan_rx_register(struct net_device *, struct vlan_group *);
 static void igb_vlan_rx_add_vid(struct net_device *, u16);
 static void igb_vlan_rx_kill_vid(struct net_device *, u16);
 static void igb_restore_vlan(struct igb_adapter *);
+static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
+static void igb_set_mc_list_pools(struct igb_adapter *, int, u16);
+static inline void igb_set_vmolr(struct e1000_hw *, int);
+static inline void igb_set_vf_rlpml(struct igb_adapter *, int, int);
 
 static int igb_suspend(struct pci_dev *, pm_message_t);
 #ifdef CONFIG_PM
@@ -888,6 +892,9 @@ int igb_up(struct igb_adapter *adapter)
 	if (adapter->msix_entries)
 		igb_configure_msix(adapter);
 
+	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
+	igb_set_vmolr(hw, adapter->vfs_allocated_count);
+
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
 	igb_irq_enable(adapter);
@@ -1617,6 +1624,9 @@ static int igb_open(struct net_device *netdev)
 	 * clean_rx handler before we do so.  */
 	igb_configure(adapter);
 
+	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
+	igb_set_vmolr(hw, adapter->vfs_allocated_count);
+
 	err = igb_request_irq(adapter);
 	if (err)
 		goto err_req_irq;
@@ -1797,10 +1807,11 @@ static void igb_configure_tx(struct igb_adapter *adapter)
 		wr32(E1000_DCA_TXCTRL(j), txctrl);
 	}
 
-	/* Use the default values for the Tx Inter Packet Gap (IPG) timer */
+	/* disable queue 0 to prevent tail bump w/o re-configuration */
+	if (adapter->vfs_allocated_count)
+		wr32(E1000_TXDCTL(0), 0);
 
 	/* Program the Transmit Control Register */
-
 	tctl = rd32(E1000_TCTL);
 	tctl &= ~E1000_TCTL_CT;
 	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
@@ -1954,6 +1965,30 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 		srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
 	}
 
+	/* Attention!!!  For SR-IOV PF driver operations you must enable
+	 * queue drop for all VF and PF queues to prevent head of line blocking
+	 * if an un-trusted VF does not provide descriptors to hardware.
+	 */
+	if (adapter->vfs_allocated_count) {
+		u32 vmolr;
+
+		j = adapter->rx_ring[0].reg_idx;
+
+		/* set all queue drop enable bits */
+		wr32(E1000_QDE, ALL_QUEUES);
+		srrctl |= E1000_SRRCTL_DROP_EN;
+
+		/* disable queue 0 to prevent tail write w/o re-config */
+		wr32(E1000_RXDCTL(0), 0);
+
+		vmolr = rd32(E1000_VMOLR(j));
+		if (rctl & E1000_RCTL_LPE)
+			vmolr |= E1000_VMOLR_LPE;
+		if (adapter->num_rx_queues > 0)
+			vmolr |= E1000_VMOLR_RSSE;
+		wr32(E1000_VMOLR(j), vmolr);
+	}
+
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		j = adapter->rx_ring[i].reg_idx;
 		wr32(E1000_SRRCTL(j), srrctl);
@@ -1962,6 +1997,54 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	wr32(E1000_RCTL, rctl);
 }
 
+/**
+ * igb_rlpml_set - set maximum receive packet size
+ * @adapter: board private structure
+ *
+ * Configure maximum receivable packet size.
+ **/
+static void igb_rlpml_set(struct igb_adapter *adapter)
+{
+	u32 max_frame_size = adapter->max_frame_size;
+	struct e1000_hw *hw = &adapter->hw;
+	u16 pf_id = adapter->vfs_allocated_count;
+
+	if (adapter->vlgrp)
+		max_frame_size += VLAN_TAG_SIZE;
+
+	/* if vfs are enabled we set RLPML to the largest possible request
+	 * size and set the VMOLR RLPML to the size we need */
+	if (pf_id) {
+		igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
+		max_frame_size = MAX_STD_JUMBO_FRAME_SIZE + VLAN_TAG_SIZE;
+	}
+
+	wr32(E1000_RLPML, max_frame_size);
+}
+
+/**
+ * igb_configure_vt_default_pool - Configure VT default pool
+ * @adapter: board private structure
+ *
+ * Configure the default pool
+ **/
+static void igb_configure_vt_default_pool(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u16 pf_id = adapter->vfs_allocated_count;
+	u32 vtctl;
+
+	/* not in sr-iov mode - do nothing */
+	if (!pf_id)
+		return;
+
+	vtctl = rd32(E1000_VT_CTL);
+	vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+		   E1000_VT_CTL_DISABLE_DEF_POOL);
+	vtctl |= pf_id << E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+	wr32(E1000_VT_CTL, vtctl);
+}
+
 /**
  * igb_configure_rx - Configure receive Unit after Reset
  * @adapter: board private structure
@@ -2033,8 +2116,10 @@ static void igb_configure_rx(struct igb_adapter *adapter)
 				writel(reta.dword,
 				       hw->hw_addr + E1000_RETA(0) + (j & ~3));
 		}
-
-		mrqc = E1000_MRQC_ENABLE_RSS_4Q;
+		if (adapter->vfs_allocated_count)
+			mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+		else
+			mrqc = E1000_MRQC_ENABLE_RSS_4Q;
 
 		/* Fill out hash function seeds */
 		for (j = 0; j < 10; j++)
@@ -2059,6 +2144,9 @@ static void igb_configure_rx(struct igb_adapter *adapter)
 		rxcsum |= E1000_RXCSUM_PCSD;
 		wr32(E1000_RXCSUM, rxcsum);
 	} else {
+		/* Enable multi-queue for sr-iov */
+		if (adapter->vfs_allocated_count)
+			wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ);
 		/* Enable Receive Checksum Offload for TCP and UDP */
 		rxcsum = rd32(E1000_RXCSUM);
 		if (adapter->rx_csum)
@@ -2069,11 +2157,10 @@ static void igb_configure_rx(struct igb_adapter *adapter)
 		wr32(E1000_RXCSUM, rxcsum);
 	}
 
-	if (adapter->vlgrp)
-		wr32(E1000_RLPML,
-				adapter->max_frame_size + VLAN_TAG_SIZE);
-	else
-		wr32(E1000_RLPML, adapter->max_frame_size);
+	/* Set the default pool for the PF's first queue */
+	igb_configure_vt_default_pool(adapter);
+
+	igb_rlpml_set(adapter);
 
 	/* Enable Receives */
 	wr32(E1000_RCTL, rctl);
@@ -2303,6 +2390,8 @@ static int igb_set_mac(struct net_device *netdev, void *p)
 
 	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
 
+	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
+
 	return 0;
 }
 
@@ -2362,7 +2451,11 @@ static void igb_set_multi(struct net_device *netdev)
 		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
 		mc_ptr = mc_ptr->next;
 	}
-	igb_update_mc_addr_list(hw, mta_list, i, 1, mac->rar_entry_count);
+	igb_update_mc_addr_list(hw, mta_list, i,
+	                        adapter->vfs_allocated_count + 1,
+	                        mac->rar_entry_count);
+
+	igb_set_mc_list_pools(adapter, i, mac->rar_entry_count);
 	kfree(mta_list);
 }
 
@@ -3222,7 +3315,6 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu)
 		return -EINVAL;
 	}
 
-#define MAX_STD_JUMBO_FRAME_SIZE 9234
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
 		dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
 		return -EINVAL;
@@ -3256,6 +3348,12 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu)
 #else
 		adapter->rx_buffer_len = PAGE_SIZE / 2;
 #endif
+
+	/* if sr-iov is enabled we need to force buffer size to 1K or larger */
+	if (adapter->vfs_allocated_count &&
+	    (adapter->rx_buffer_len < IGB_RXBUFFER_1024))
+		adapter->rx_buffer_len = IGB_RXBUFFER_1024;
+
 	/* adjust allocation if LPE protects us, and we aren't using SBP */
 	if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
 	     (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))
@@ -4462,8 +4560,6 @@ static void igb_vlan_rx_register(struct net_device *netdev,
 		rctl &= ~E1000_RCTL_CFIEN;
 		wr32(E1000_RCTL, rctl);
 		igb_update_mng_vlan(adapter);
-		wr32(E1000_RLPML,
-				adapter->max_frame_size + VLAN_TAG_SIZE);
 	} else {
 		/* disable VLAN tag insert/strip */
 		ctrl = rd32(E1000_CTRL);
@@ -4474,10 +4570,10 @@ static void igb_vlan_rx_register(struct net_device *netdev,
 			igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
 			adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
 		}
-		wr32(E1000_RLPML,
-				adapter->max_frame_size);
 	}
 
+	igb_rlpml_set(adapter);
+
 	if (!test_bit(__IGB_DOWN, &adapter->state))
 		igb_irq_enable(adapter);
 }
@@ -4841,4 +4937,52 @@ static void igb_io_resume(struct pci_dev *pdev)
 	igb_get_hw_control(adapter);
 }
 
+static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
+{
+	u32 reg_data;
+
+	reg_data = rd32(E1000_VMOLR(vfn));
+	reg_data |= E1000_VMOLR_BAM |	 /* Accept broadcast */
+	            E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
+	            E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
+	            E1000_VMOLR_AUPE |   /* Accept untagged packets */
+	            E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+	wr32(E1000_VMOLR(vfn), reg_data);
+}
+
+static inline void igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+                                    int vfn)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr;
+
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr &= ~E1000_VMOLR_RLPML_MASK;
+	vmolr |= size | E1000_VMOLR_LPE;
+	wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
+{
+	u32 reg_data;
+
+	reg_data = rd32(E1000_RAH(entry));
+	reg_data &= ~E1000_RAH_POOL_MASK;
+	reg_data |= E1000_RAH_POOL_1 << pool;;
+	wr32(E1000_RAH(entry), reg_data);
+}
+
+static void igb_set_mc_list_pools(struct igb_adapter *adapter,
+				  int entry_count, u16 total_rar_filters)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int i = adapter->vfs_allocated_count + 1;
+
+	if ((i + entry_count) < total_rar_filters)
+		total_rar_filters = i + entry_count;
+
+	for (; i < total_rar_filters; i++)
+		igb_set_rah_pool(hw, adapter->vfs_allocated_count, i);
+}
+
 /* igb_main.c */