Commit de99ff82 authored by Ivo van Doorn's avatar Ivo van Doorn Committed by John W. Linville

rt2x00: Rename dscape -> mac80211

The dscape stack was renamed to mac80211 a long time ago,
we are long overdue with fixing all comments to reflect this.
Signed-off-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ef8f66cd
...@@ -5,7 +5,7 @@ config RT2X00 ...@@ -5,7 +5,7 @@ config RT2X00
This will enable the experimental support for the Ralink drivers, This will enable the experimental support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
These drivers will make use of the Devicescape ieee80211 stack. These drivers will make use of the mac80211 stack.
When building one of the individual drivers, the rt2x00 library When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as will also be created. That library (when the driver is built as
......
...@@ -923,13 +923,13 @@ ...@@ -923,13 +923,13 @@
#define RXD_W7_RESERVED FIELD32(0xffffffff) #define RXD_W7_RESERVED FIELD32(0xffffffff)
/* /*
* Macro's for converting txpower from EEPROM to dscape value * Macro's for converting txpower from EEPROM to mac80211 value
* and from dscape value to register value. * and from mac80211 value to register value.
* NOTE: Logics in rt2400pci for txpower are reversed * NOTE: Logics in rt2400pci for txpower are reversed
* compared to the other rt2x00 drivers. A higher txpower * compared to the other rt2x00 drivers. A higher txpower
* value means that the txpower must be lowered. This is * value means that the txpower must be lowered. This is
* important when converting the value coming from the * important when converting the value coming from the
* dscape stack to the rt2400 acceptable value. * mac80211 stack to the rt2400 acceptable value.
*/ */
#define MIN_TXPOWER 31 #define MIN_TXPOWER 31
#define MAX_TXPOWER 62 #define MAX_TXPOWER 62
......
...@@ -1213,8 +1213,8 @@ ...@@ -1213,8 +1213,8 @@
#define RXD_W10_DROP FIELD32(0x00000001) #define RXD_W10_DROP FIELD32(0x00000001)
/* /*
* Macro's for converting txpower from EEPROM to dscape value * Macro's for converting txpower from EEPROM to mac80211 value
* and from dscape value to register value. * and from mac80211 value to register value.
*/ */
#define MIN_TXPOWER 0 #define MIN_TXPOWER 0
#define MAX_TXPOWER 31 #define MAX_TXPOWER 31
......
...@@ -787,8 +787,8 @@ ...@@ -787,8 +787,8 @@
#define RXD_W3_EIV FIELD32(0xffffffff) #define RXD_W3_EIV FIELD32(0xffffffff)
/* /*
* Macro's for converting txpower from EEPROM to dscape value * Macro's for converting txpower from EEPROM to mac80211 value
* and from dscape value to register value. * and from mac80211 value to register value.
*/ */
#define MIN_TXPOWER 0 #define MIN_TXPOWER 0
#define MAX_TXPOWER 31 #define MAX_TXPOWER 31
......
...@@ -1455,8 +1455,8 @@ struct hw_pairwise_ta_entry { ...@@ -1455,8 +1455,8 @@ struct hw_pairwise_ta_entry {
#define RXD_W15_RESERVED FIELD32(0xffffffff) #define RXD_W15_RESERVED FIELD32(0xffffffff)
/* /*
* Macro's for converting txpower from EEPROM to dscape value * Macro's for converting txpower from EEPROM to mac80211 value
* and from dscape value to register value. * and from mac80211 value to register value.
*/ */
#define MIN_TXPOWER 0 #define MIN_TXPOWER 0
#define MAX_TXPOWER 31 #define MAX_TXPOWER 31
......
...@@ -1023,8 +1023,8 @@ struct hw_pairwise_ta_entry { ...@@ -1023,8 +1023,8 @@ struct hw_pairwise_ta_entry {
#define RXD_W5_RESERVED FIELD32(0xffffffff) #define RXD_W5_RESERVED FIELD32(0xffffffff)
/* /*
* Macro's for converting txpower from EEPROM to dscape value * Macro's for converting txpower from EEPROM to mac80211 value
* and from dscape value to register value. * and from mac80211 value to register value.
*/ */
#define MIN_TXPOWER 0 #define MIN_TXPOWER 0
#define MAX_TXPOWER 31 #define MAX_TXPOWER 31
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment