Commit de95a54b authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville

mac80211: pass all probe request IEs to driver

Instead of just passing the cfg80211-requested IEs, pass
the locally generated ones as well.
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 18a83659
......@@ -503,7 +503,7 @@ struct cfg80211_scan_request {
int n_ssids;
struct ieee80211_channel **channels;
u32 n_channels;
u8 *ie;
const u8 *ie;
size_t ie_len;
/* internal */
......
......@@ -1330,11 +1330,14 @@ enum ieee80211_ampdu_mlme_action {
* the scan state machine in stack. The scan must honour the channel
* configuration done by the regulatory agent in the wiphy's
* registered bands. The hardware (or the driver) needs to make sure
* that power save is disabled. When the scan finishes,
* ieee80211_scan_completed() must be called; note that it also must
* be called when the scan cannot finish because the hardware is
* turned off! Anything else is a bug! Returns a negative error code
* which will be seen in userspace.
* that power save is disabled.
* The @req ie/ie_len members are rewritten by mac80211 to contain the
* entire IEs after the SSID, so that drivers need not look at these
* at all but just send them after the SSID -- mac80211 includes the
* (extended) supported rates and HT information (where applicable).
* When the scan finishes, ieee80211_scan_completed() must be called;
* note that it also must be called when the scan cannot finish due to
* any error unless this callback returned a negative error code.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
......
......@@ -671,7 +671,10 @@ struct ieee80211_local {
struct cfg80211_scan_request int_scan_req;
struct cfg80211_scan_request *scan_req;
struct ieee80211_channel *scan_channel;
const u8 *orig_ies;
int orig_ies_len;
int scan_channel_idx;
int scan_ies_len;
enum { SCAN_SET_CHANNEL, SCAN_SEND_PROBE } scan_state;
unsigned long last_scan_completed;
......@@ -1090,9 +1093,11 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
u16 transaction, u16 auth_alg,
u8 *extra, size_t extra_len,
const u8 *bssid, int encrypt);
int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
const u8 *ie, size_t ie_len);
void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
u8 *ssid, size_t ssid_len,
u8 *ie, size_t ie_len);
const u8 *ssid, size_t ssid_len,
const u8 *ie, size_t ie_len);
void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
const size_t supp_rates_len,
......
......@@ -729,22 +729,12 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
wiphy->privid = mac80211_wiphy_privid;
if (!ops->hw_scan) {
/* For hw_scan, driver needs to set these up. */
wiphy->max_scan_ssids = 4;
/* we support a maximum of 32 rates in cfg80211 */
wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN
- 2 - 32 /* SSID */
- 4 - 32 /* (ext) supp rates */;
}
/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
sizeof(struct cfg80211_bss);
local = wiphy_priv(wiphy);
local->hw.wiphy = wiphy;
local->hw.priv = (char *)local +
......@@ -831,7 +821,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
enum ieee80211_band band;
struct net_device *mdev;
struct ieee80211_master_priv *mpriv;
int channels, i, j;
int channels, i, j, max_bitrates;
/*
* generic code guarantees at least one band,
......@@ -839,18 +829,23 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
* that hw.conf.channel is assigned
*/
channels = 0;
max_bitrates = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[band];
if (sband && !local->oper_channel) {
if (!sband)
continue;
if (!local->oper_channel) {
/* init channel we're on */
local->hw.conf.channel =
local->oper_channel =
local->scan_channel = &sband->channels[0];
}
if (sband)
channels += sband->n_channels;
channels += sband->n_channels;
if (max_bitrates < sband->n_bitrates)
max_bitrates = sband->n_bitrates;
}
local->int_scan_req.n_channels = channels;
......@@ -870,6 +865,30 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
* includes the (extended) supported rates and HT
* information -- SSID is the driver's responsibility.
*/
local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
if (!local->ops->hw_scan) {
/* For hw_scan, driver needs to set these up. */
local->hw.wiphy->max_scan_ssids = 4;
local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
}
/*
* If the driver supports any scan IEs, then assume the
* limit includes the IEs mac80211 will add, otherwise
* leave it at zero and let the driver sort it out; we
* still pass our IEs to the driver but userspace will
* not be allowed to in that case.
*/
if (local->hw.wiphy->max_scan_ie_len)
local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
......
......@@ -285,6 +285,12 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
if (WARN_ON(!local->scan_req))
return;
if (local->hw_scanning) {
kfree(local->scan_req->ie);
local->scan_req->ie = local->orig_ies;
local->scan_req->ie_len = local->orig_ies_len;
}
if (local->scan_req != &local->int_scan_req)
cfg80211_scan_done(local->scan_req, aborted);
local->scan_req = NULL;
......@@ -457,12 +463,28 @@ int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
}
if (local->ops->hw_scan) {
int rc;
u8 *ies;
int rc, ielen;
ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
local->scan_ies_len + req->ie_len, GFP_KERNEL);
if (!ies)
return -ENOMEM;
ielen = ieee80211_build_preq_ies(local, ies,
req->ie, req->ie_len);
local->orig_ies = req->ie;
local->orig_ies_len = req->ie_len;
req->ie = ies;
req->ie_len = ielen;
local->hw_scanning = true;
rc = local->ops->hw_scan(local_to_hw(local), req);
if (rc) {
local->hw_scanning = false;
kfree(ies);
req->ie_len = local->orig_ies_len;
req->ie = local->orig_ies;
return rc;
}
local->scan_sdata = scan_sdata;
......
......@@ -831,16 +831,57 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
ieee80211_tx_skb(sdata, skb, encrypt);
}
int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
const u8 *ie, size_t ie_len)
{
struct ieee80211_supported_band *sband;
u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
int i;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
pos = buffer;
*pos++ = WLAN_EID_SUPP_RATES;
supp_rates_len = pos;
*pos++ = 0;
for (i = 0; i < sband->n_bitrates; i++) {
struct ieee80211_rate *rate = &sband->bitrates[i];
if (esupp_rates_len) {
*esupp_rates_len += 1;
} else if (*supp_rates_len == 8) {
*pos++ = WLAN_EID_EXT_SUPP_RATES;
esupp_rates_len = pos;
*pos++ = 1;
} else
*supp_rates_len += 1;
*pos++ = rate->bitrate / 5;
}
/*
* If adding more here, adjust code in main.c
* that calculates local->scan_ies_len.
*/
if (ie) {
memcpy(pos, ie, ie_len);
pos += ie_len;
}
return pos - buffer;
}
void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
u8 *ssid, size_t ssid_len,
u8 *ie, size_t ie_len)
const u8 *ssid, size_t ssid_len,
const u8 *ie, size_t ie_len)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u8 *pos, *supp_rates, *esupp_rates = NULL;
int i;
u8 *pos;
skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt) + 200 +
ie_len);
......@@ -867,33 +908,9 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
*pos++ = WLAN_EID_SSID;
*pos++ = ssid_len;
memcpy(pos, ssid, ssid_len);
pos += ssid_len;
supp_rates = skb_put(skb, 2);
supp_rates[0] = WLAN_EID_SUPP_RATES;
supp_rates[1] = 0;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
for (i = 0; i < sband->n_bitrates; i++) {
struct ieee80211_rate *rate = &sband->bitrates[i];
if (esupp_rates) {
pos = skb_put(skb, 1);
esupp_rates[1]++;
} else if (supp_rates[1] == 8) {
esupp_rates = skb_put(skb, 3);
esupp_rates[0] = WLAN_EID_EXT_SUPP_RATES;
esupp_rates[1] = 1;
pos = &esupp_rates[2];
} else {
pos = skb_put(skb, 1);
supp_rates[1]++;
}
*pos = rate->bitrate / 5;
}
/* if adding more here, adjust max_scan_ie_len */
if (ie)
memcpy(skb_put(skb, ie_len), ie, ie_len);
skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len));
ieee80211_tx_skb(sdata, skb, 0);
}
......
......@@ -2597,7 +2597,8 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_IE]) {
request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
memcpy(request->ie, nla_data(info->attrs[NL80211_ATTR_IE]),
memcpy((void *)request->ie,
nla_data(info->attrs[NL80211_ATTR_IE]),
request->ie_len);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment