Skip to content

L
linux-davinci
Commit ddd64159 authored by Andy Fleming's avatar Andy Fleming Committed by Paul Mackerras
Browse files
Options

[POWERPC] Fix CDS IRQ handling and PCI code 

* Fix IRQ support in the 85xx CDS boards so it uses the new
  generic stuff
* Fix PCI IRQ mapping to use the device tree
* Disabled i8259 support to allow the CDS to boot.  This will be
  fixed soon, but the current code doesn't even compile, so this
  is a vast improvement
Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 4c86cd9c
Hide whitespace changes
Inline Side-by-side
Showing with 88 additions and 123 deletions
arch/powerpc/platforms/85xx/Kconfig
View file @ ddd64159
......@@ -14,7 +14,6 @@ config MPC8540_ADS
config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
select PPC_I8259 if PCI
help
This option enables support for the MPC85xx CDS board
......
arch/powerpc/platforms/85xx/mpc85xx_cds.c
View file @ ddd64159
......@@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0;
static int cds_pci_slot = 2;
static volatile u8 *cadmus;
/*
* Internal interrupts are all Level Sensitive, and Positive Polarity
*
* Note: Likely, this table and the following function should be
* obtained and derived from the OF Device Tree.
*/
static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
MPC85XX_INTERNAL_IRQ_SENSES,
#if defined(CONFIG_PCI)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */
#else
0x0, /* External 0: */
0x0, /* External 1: */
0x0, /* External 2: */
0x0, /* External 3: */
#endif
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
0x0, /* External 6: */
0x0, /* External 7: */
0x0, /* External 8: */
0x0, /* External 9: */
0x0, /* External 10: */
#ifdef CONFIG_PCI
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */
#else
0x0, /* External 11: */
#endif
};
#ifdef CONFIG_PCI
/*
* interrupt routing
*/
int
mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
if (!hose->index)
{
/* Handle PCI1 interrupts */
char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
/* Note IRQ assignment for slots is based on which slot the elysium is
* in -- in this setup elysium is in slot #2 (this PIRQA as first
* interrupt on slot */
{
{ 0, 1, 2, 3 }, /* 16 - PMC */
{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
{ 3, 0, 1, 2 }, /* 21 - Slot 4 */
};
const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
int i, j;
for (i = 0; i < 6; i++)
for (j = 0; j < 4; j++)
pci_irq_table[i][j] =
((pci_irq_table[i][j] + 5 -
cds_pci_slot) & 0x3) + PIRQ0A;
return PCI_IRQ_TABLE_LOOKUP;
} else {
/* Handle PCI2 interrupts (if we have one) */
char pci_irq_table[][4] =
{
/*
* We only have one slot and one interrupt
* going to PIRQA - PIRQD */
{ PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
};
const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
}
#define ARCADIA_HOST_BRIDGE_IDSEL 17
#define ARCADIA_2ND_BRIDGE_IDSEL 3
......@@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
pci_dev_put(dev);
}
/* Now map all the PCI irqs */
dev = NULL;
for_each_pci_dev(dev)
pci_read_irq_line(dev);
}
#ifdef CONFIG_PPC_I8259
#warning The i8259 PIC support is currently broken
static void mpc85xx_8259_cascade(unsigned int irq, struct
irq_desc *desc, struct pt_regs *regs)
{
unsigned int cascade_irq = i8259_irq(regs);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq, regs);
desc->chip->eoi(irq);
}
#endif /* PPC_I8259 */
#endif /* CONFIG_PCI */
void __init mpc85xx_cds_pic_init(void)
{
struct mpic *mpic1;
phys_addr_t OpenPIC_PAddr;
struct mpic *mpic;
struct resource r;
struct device_node *np = NULL;
struct device_node *cascade_node = NULL;
int cascade_irq;
/* Determine the Physical Address of the OpenPIC regs */
OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
np = of_find_node_by_type(np, "open-pic");
if (np == NULL) {
printk(KERN_ERR "Could not find open-pic node\n");
return;
}
mpic1 = mpic_alloc(OpenPIC_PAddr,
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "Failed to map mpic register space\n");
of_node_put(np);
return;
}
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
mpc85xx_cds_openpic_initsenses,
sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC ");
BUG_ON(mpic1 == NULL);
mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
/* dummy mappings to get to 48 */
mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
/* External ints */
mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
mpic_init(mpic1);
4, 0, " OpenPIC ");
BUG_ON(mpic == NULL);
/* Return the mpic node */
of_node_put(np);
mpic_assign_isu(mpic, 0, r.start + 0x10200);
mpic_assign_isu(mpic, 1, r.start + 0x10280);
mpic_assign_isu(mpic, 2, r.start + 0x10300);
mpic_assign_isu(mpic, 3, r.start + 0x10380);
mpic_assign_isu(mpic, 4, r.start + 0x10400);
mpic_assign_isu(mpic, 5, r.start + 0x10480);
mpic_assign_isu(mpic, 6, r.start + 0x10500);
mpic_assign_isu(mpic, 7, r.start + 0x10580);
/* Used only for 8548 so far, but no harm in
* allocating them for everyone */
mpic_assign_isu(mpic, 8, r.start + 0x10600);
mpic_assign_isu(mpic, 9, r.start + 0x10680);
mpic_assign_isu(mpic, 10, r.start + 0x10700);
mpic_assign_isu(mpic, 11, r.start + 0x10780);
/* External Interrupts */
mpic_assign_isu(mpic, 12, r.start + 0x10000);
mpic_assign_isu(mpic, 13, r.start + 0x10080);
mpic_assign_isu(mpic, 14, r.start + 0x10100);
mpic_init(mpic);
#ifdef CONFIG_PPC_I8259
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}
if (cascade_node == NULL) {
printk(KERN_DEBUG "Could not find i8259 PIC\n");
return;
}
#ifdef CONFIG_PCI
mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
cascade_irq = irq_of_parse_and_map(cascade_node, 0);
if (cascade_irq == NO_IRQ) {
printk(KERN_ERR "Failed to map cascade interrupt\n");
return;
}
i8259_init(0,0);
#endif
i8259_init(cascade_node, 0);
of_node_put(cascade_node);
set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
#endif /* CONFIG_PPC_I8259 */
}
......@@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void)
add_bridge(np);
ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = mpc85xx_map_irq;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment