Commit dbf763a2 authored by Atsushi Nemoto's avatar Atsushi Nemoto Committed by Ralf Baechle

SPI: spi_txx9: Fix bit rate calculation

TXx9 SPI bit rate is calculated by:
        fBR = (spi-baseclk) / (n + 1)
Fix calculation of min_speed_hz, max_speed_hz and n.
Signed-off-by: default avatarAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 56f3f55c
......@@ -29,6 +29,8 @@
#define SPI_FIFO_SIZE 4
#define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */
#define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */
#define TXx9_SPMCR 0x00
#define TXx9_SPCR0 0x04
......@@ -193,11 +195,8 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
if (prev_speed_hz != speed_hz
|| prev_bits_per_word != bits_per_word) {
u32 n = (c->baseclk + speed_hz - 1) / speed_hz;
if (n < 1)
n = 1;
else if (n > 0xff)
n = 0xff;
int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1;
n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER);
/* enter config mode */
txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR,
TXx9_SPMCR);
......@@ -370,8 +369,8 @@ static int __init txx9spi_probe(struct platform_device *dev)
goto exit;
}
c->baseclk = clk_get_rate(c->clk);
c->min_speed_hz = (c->baseclk + 0xff - 1) / 0xff;
c->max_speed_hz = c->baseclk;
c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment