MIPS: Alchemy: DB1200: Remove custom wait implementation

While playing with the out-of-tree MAE driver module, the system would
panic after a while in the db1200 custom wait code after wakeup due to
a clobbered k0 register being used as target address of a store op.

Remove the custom wait implementation and revert back to the Alchemy-
recommended implementation already set as default.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1092/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/alchemy/devboards/db1200/setup.c

@@ -60,43 +60,6 @@ void __init board_setup(void)
 	wmb();
 }
 
-/* use the hexleds to count the number of times the cpu has entered
- * wait, the dots to indicate whether the CPU is currently idle or
- * active (dots off = sleeping, dots on = working) for cases where
- * the number doesn't change for a long(er) period of time.
- */
-static void db1200_wait(void)
-{
-	__asm__("	.set	push			\n"
-		"	.set	mips3			\n"
-		"	.set	noreorder		\n"
-		"	cache	0x14, 0(%0)		\n"
-		"	cache	0x14, 32(%0)		\n"
-		"	cache	0x14, 64(%0)		\n"
-		/* dots off: we're about to call wait */
-		"	lui	$26, 0xb980		\n"
-		"	ori	$27, $0, 3		\n"
-		"	sb	$27, 0x18($26)		\n"
-		"	sync				\n"
-		"	nop				\n"
-		"	wait				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		/* dots on: there's work to do, increment cntr */
-		"	lui	$26, 0xb980		\n"
-		"	sb	$0, 0x18($26)		\n"
-		"	lui	$26, 0xb9c0		\n"
-		"	lb	$27, 0($26)		\n"
-		"	addiu	$27, $27, 1		\n"
-		"	sb	$27, 0($26)		\n"
-		"	sync				\n"
-		"	.set	pop			\n"
-		: : "r" (db1200_wait));
-}
-
 static int __init db1200_arch_init(void)
 {
 	/* GPIO7 is low-level triggered CPLD cascade */
@@ -110,9 +73,6 @@ static int __init db1200_arch_init(void)
 	irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
 	irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
 
-	if (cpu_wait)
-		cpu_wait = db1200_wait;
-
 	return 0;
 }
 arch_initcall(db1200_arch_init);