[SCSI] seagate: remove header and convert to struct scsi_cmnd

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/Kconfig

@@ -1260,8 +1260,8 @@ config SCSI_SEAGATE
 	  These are 8-bit SCSI controllers; the ST-01 is also supported by
 	  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.  If it
-	  doesn't work out of the box, you may have to change some settings in
-	  <file:drivers/scsi/seagate.h>.
+	  doesn't work out of the box, you may have to change some macros at
+	  compiletime, which are described in <file:drivers/scsi/seagate.c>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called seagate.

drivers/scsi/seagate.c

@@ -106,7 +106,6 @@
 #include "scsi.h"
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
-#include "seagate.h"
 
 #include <scsi/scsi_ioctl.h>
 
@@ -322,6 +321,7 @@ static Signature __initdata signatures[] = {
 static int hostno = -1;
 static void seagate_reconnect_intr (int, void *, struct pt_regs *);
 static irqreturn_t do_seagate_reconnect_intr (int, void *, struct pt_regs *);
+static int seagate_st0x_bus_reset(struct scsi_cmnd *);
 
 #ifdef FAST
 static int fast = 1;
@@ -585,8 +585,8 @@ static int linked_connected = 0;
 static unsigned char linked_target, linked_lun;
 #endif
 
-static void (*done_fn) (Scsi_Cmnd *) = NULL;
-static Scsi_Cmnd *SCint = NULL;
+static void (*done_fn) (struct scsi_cmnd *) = NULL;
+static struct scsi_cmnd *SCint = NULL;
 
 /*
  * These control whether or not disconnect / reconnect will be attempted,
@@ -633,7 +633,7 @@ static irqreturn_t do_seagate_reconnect_intr(int irq, void *dev_id,
 static void seagate_reconnect_intr (int irq, void *dev_id, struct pt_regs *regs)
 {
 	int temp;
-	Scsi_Cmnd *SCtmp;
+	struct scsi_cmnd *SCtmp;
 
 	DPRINTK (PHASE_RESELECT, "scsi%d : seagate_reconnect_intr() called\n", hostno);
 
@@ -675,10 +675,11 @@ static void seagate_reconnect_intr (int irq, void *dev_id, struct pt_regs *regs)
 
 static int recursion_depth = 0;
 
-static int seagate_st0x_queue_command (Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int seagate_st0x_queue_command(struct scsi_cmnd * SCpnt,
+				      void (*done) (struct scsi_cmnd *))
 {
 	int result, reconnect;
-	Scsi_Cmnd *SCtmp;
+	struct scsi_cmnd *SCtmp;
 
 	DANY ("seagate: que_command");
 	done_fn = done;
@@ -1609,7 +1610,7 @@ connect_loop:
 	return retcode (st0x_aborted);
 }				/* end of internal_command */
 
-static int seagate_st0x_abort (Scsi_Cmnd * SCpnt)
+static int seagate_st0x_abort(struct scsi_cmnd * SCpnt)
 {
 	st0x_aborted = DID_ABORT;
 	return SUCCESS;
@@ -1624,7 +1625,7 @@ static int seagate_st0x_abort (Scsi_Cmnd * SCpnt)
  * May be called with SCpnt = NULL
  */
 
-static int seagate_st0x_bus_reset(Scsi_Cmnd * SCpnt)
+static int seagate_st0x_bus_reset(struct scsi_cmnd * SCpnt)
 {
 	/* No timeouts - this command is going to fail because it was reset. */
 	DANY ("scsi%d: Reseting bus... ", hostno);

drivers/scsi/seagate.h

-/*
- *	seagate.h Copyright (C) 1992 Drew Eckhardt 
- *	low level scsi driver header for ST01/ST02 by
- *		Drew Eckhardt 
- *
- *	<drew@colorado.edu>
- */
-
-#ifndef _SEAGATE_H
-#define SEAGATE_H
-
-static int seagate_st0x_detect(struct scsi_host_template *);
-static int seagate_st0x_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-
-static int seagate_st0x_abort(Scsi_Cmnd *);
-static const char *seagate_st0x_info(struct Scsi_Host *);
-static int seagate_st0x_bus_reset(Scsi_Cmnd *);
-
-#endif /* _SEAGATE_H */