ppc64: remove ppc_irq_dispatch_handler

Use __do_IRQ instead.  The only difference is that every controller
is now assumed to have an end() routine (only xics_8259 did not).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

arch/powerpc/kernel/misc_64.S

@@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_ppc_irq_dispatch_handler)
+_GLOBAL(call___do_IRQ)
 	mflr	r0
 	std	r0,16(r1)
 	stdu	r1,THREAD_SIZE-112(r5)
 	mr	r1,r5
-	bl	.ppc_irq_dispatch_handler
+	bl	.__do_IRQ
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0

arch/powerpc/platforms/iseries/irq.c

@@ -120,13 +120,13 @@ static void intReceived(struct XmPciLpEvent *eventParm,
 		if (curtp != irqtp) {
 			irqtp->task = curtp->task;
 			irqtp->flags = 0;
-			call_ppc_irq_dispatch_handler(regsParm, irq, irqtp);
+			call___do_IRQ(irq, regsParm, irqtp);
 			irqtp->task = NULL;
 			if (irqtp->flags)
 				set_bits(irqtp->flags, &curtp->flags);
 		} else
 #endif
-			ppc_irq_dispatch_handler(regsParm, irq);
+			__do_IRQ(irq, regsParm);
 		HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
 			eventParm->eventData.slotInterrupt.subBusNumber,
 			eventParm->eventData.slotInterrupt.deviceId);
@@ -326,10 +326,8 @@ static void iSeries_disable_IRQ(unsigned int irq)
 }
 
 /*
- * Need to define this so ppc_irq_dispatch_handler will NOT call
- * enable_IRQ at the end of interrupt handling.  However, this does
- * nothing because there is not enough information provided to do
- * the EOI HvCall.  This is done by XmPciLpEvent.c
+ * This does nothing because there is not enough information
+ * provided to do the EOI HvCall.  This is done by XmPciLpEvent.c
  */
 static void iSeries_end_IRQ(unsigned int irq)
 {

arch/powerpc/platforms/pseries/xics.c

@@ -567,6 +567,7 @@ nextnode:
 
 	xics_8259_pic.enable = i8259_pic.enable;
 	xics_8259_pic.disable = i8259_pic.disable;
+	xics_8259_pic.end = i8259_pic.end;
 	for (i = 0; i < 16; ++i)
 		get_irq_desc(i)->handler = &xics_8259_pic;
 	for (; i < NR_IRQS; ++i)

arch/ppc64/kernel/irq.c

@@ -144,110 +144,6 @@ void fixup_irqs(cpumask_t map)
 }
 #endif
 
-extern int noirqdebug;
-
-/*
- * Eventually, this should take an array of interrupts and an array size
- * so it can dispatch multiple interrupts.
- */
-void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
-{
-	int status;
-	struct irqaction *action;
-	int cpu = smp_processor_id();
-	irq_desc_t *desc = get_irq_desc(irq);
-	irqreturn_t action_ret;
-
-	kstat_cpu(cpu).irqs[irq]++;
-
-	if (desc->status & IRQ_PER_CPU) {
-		/* no locking required for CPU-local interrupts: */
-		ack_irq(irq);
-		action_ret = handle_IRQ_event(irq, regs, desc->action);
-		desc->handler->end(irq);
-		return;
-	}
-
-	spin_lock(&desc->lock);
-	ack_irq(irq);	
-	/*
-	   REPLAY is when Linux resends an IRQ that was dropped earlier
-	   WAITING is used by probe to mark irqs that are being tested
-	   */
-	status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
-	status |= IRQ_PENDING; /* we _want_ to handle it */
-
-	/*
-	 * If the IRQ is disabled for whatever reason, we cannot
-	 * use the action we have.
-	 */
-	action = NULL;
-	if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
-		action = desc->action;
-		if (!action || !action->handler) {
-			ppc_spurious_interrupts++;
-			printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq);
-			/* We can't call disable_irq here, it would deadlock */
-			if (!desc->depth)
-				desc->depth = 1;
-			desc->status |= IRQ_DISABLED;
-			/* This is not a real spurrious interrupt, we
-			 * have to eoi it, so we jump to out
-			 */
-			mask_irq(irq);
-			goto out;
-		}
-		status &= ~IRQ_PENDING; /* we commit to handling */
-		status |= IRQ_INPROGRESS; /* we are handling it */
-	}
-	desc->status = status;
-
-	/*
-	 * If there is no IRQ handler or it was disabled, exit early.
-	   Since we set PENDING, if another processor is handling
-	   a different instance of this same irq, the other processor
-	   will take care of it.
-	 */
-	if (unlikely(!action))
-		goto out;
-
-	/*
-	 * Edge triggered interrupts need to remember
-	 * pending events.
-	 * This applies to any hw interrupts that allow a second
-	 * instance of the same irq to arrive while we are in do_IRQ
-	 * or in the handler. But the code here only handles the _second_
-	 * instance of the irq, not the third or fourth. So it is mostly
-	 * useful for irq hardware that does not mask cleanly in an
-	 * SMP environment.
-	 */
-	for (;;) {
-		spin_unlock(&desc->lock);
-
-		action_ret = handle_IRQ_event(irq, regs, action);
-
-		spin_lock(&desc->lock);
-		if (!noirqdebug)
-			note_interrupt(irq, desc, action_ret, regs);
-		if (likely(!(desc->status & IRQ_PENDING)))
-			break;
-		desc->status &= ~IRQ_PENDING;
-	}
-out:
-	desc->status &= ~IRQ_INPROGRESS;
-	/*
-	 * The ->end() handler has to deal with interrupts which got
-	 * disabled while the handler was running.
-	 */
-	if (desc->handler) {
-		if (desc->handler->end)
-			desc->handler->end(irq);
-		else if (desc->handler->enable)
-			desc->handler->enable(irq);
-	}
-	spin_unlock(&desc->lock);
-}
-
 #ifdef CONFIG_PPC_ISERIES
 void do_IRQ(struct pt_regs *regs)
 {
@@ -325,13 +221,13 @@ void do_IRQ(struct pt_regs *regs)
 		if (curtp != irqtp) {
 			irqtp->task = curtp->task;
 			irqtp->flags = 0;
-			call_ppc_irq_dispatch_handler(regs, irq, irqtp);
+			call___do_IRQ(irq, regs, irqtp);
 			irqtp->task = NULL;
 			if (irqtp->flags)
 				set_bits(irqtp->flags, &curtp->flags);
 		} else
 #endif
-			ppc_irq_dispatch_handler(regs, irq);
+			__do_IRQ(irq, regs);
 	} else
 		/* That's not SMP safe ... but who cares ? */
 		ppc_spurious_interrupts++;

arch/ppc64/kernel/misc.S

@@ -78,12 +78,12 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_ppc_irq_dispatch_handler)
+_GLOBAL(call___do_IRQ)
 	mflr	r0
 	std	r0,16(r1)
 	stdu	r1,THREAD_SIZE-112(r5)
 	mr	r1,r5
-	bl	.ppc_irq_dispatch_handler
+	bl	.__do_IRQ
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0

include/asm-powerpc/hw_irq.h

@@ -12,7 +12,6 @@
 #include <asm/processor.h>
 
 extern void timer_interrupt(struct pt_regs *);
-extern void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq);
 
 #ifdef CONFIG_PPC_ISERIES
 

include/asm-powerpc/irq.h

@@ -488,7 +488,7 @@ extern struct thread_info *softirq_ctx[NR_CPUS];
 
 extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
-extern int call_ppc_irq_dispatch_handler(struct pt_regs *regs, int irq,
+extern int call___do_IRQ(int irq, struct pt_regs *regs,
 		struct thread_info *tp);
 
 #define __ARCH_HAS_DO_SOFTIRQ