Commit d3561b7f authored by Rusty Russell's avatar Rusty Russell Committed by Andi Kleen

[PATCH] paravirt: header and stubs for paravirtualisation

Create a paravirt.h header for all the critical operations which need to be
replaced with hypervisor calls, and include that instead of defining native
operations, when CONFIG_PARAVIRT.

This patch does the dumbest possible replacement of paravirtualized
instructions: calls through a "paravirt_ops" structure.  Currently these are
function implementations of native hardware: hypervisors will override the ops
structure with their own variants.

All the pv-ops functions are declared "fastcall" so that a specific
register-based ABI is used, to make inlining assember easier.

And:

+From: Andy Whitcroft <apw@shadowen.org>

The paravirt ops introduce a 'weak' attribute onto memory_setup().
Code ordering leads to the following warnings on x86:

    arch/i386/kernel/setup.c:651: warning: weak declaration of
                `memory_setup' after first use results in unspecified behavior

Move memory_setup() to avoid this.
Signed-off-by: default avatarRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: default avatarChris Wright <chrisw@sous-sol.org>
Signed-off-by: default avatarAndi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
parent db91b882
...@@ -182,6 +182,17 @@ config X86_ES7000 ...@@ -182,6 +182,17 @@ config X86_ES7000
endchoice endchoice
config PARAVIRT
bool "Paravirtualization support (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
Paravirtualization is a way of running multiple instances of
Linux on the same machine, under a hypervisor. This option
changes the kernel so it can modify itself when it is run
under a hypervisor, improving performance significantly.
However, when run without a hypervisor the kernel is
theoretically slower. If in doubt, say N.
config ACPI_SRAT config ACPI_SRAT
bool bool
default y default y
......
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/ */
#undef CONFIG_PARAVIRT
#include <linux/linkage.h> #include <linux/linkage.h>
#include <linux/vmalloc.h> #include <linux/vmalloc.h>
#include <linux/screen_info.h> #include <linux/screen_info.h>
......
...@@ -39,6 +39,7 @@ obj-$(CONFIG_VM86) += vm86.o ...@@ -39,6 +39,7 @@ obj-$(CONFIG_VM86) += vm86.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_K8_NB) += k8.o
obj-$(CONFIG_PARAVIRT) += paravirt.o
EXTRA_AFLAGS := -traditional EXTRA_AFLAGS := -traditional
......
...@@ -101,4 +101,14 @@ void foo(void) ...@@ -101,4 +101,14 @@ void foo(void)
BLANK(); BLANK();
OFFSET(PDA_cpu, i386_pda, cpu_number); OFFSET(PDA_cpu, i386_pda, cpu_number);
OFFSET(PDA_pcurrent, i386_pda, pcurrent); OFFSET(PDA_pcurrent, i386_pda, pcurrent);
#ifdef CONFIG_PARAVIRT
BLANK();
OFFSET(PARAVIRT_enabled, paravirt_ops, paravirt_enabled);
OFFSET(PARAVIRT_irq_disable, paravirt_ops, irq_disable);
OFFSET(PARAVIRT_irq_enable, paravirt_ops, irq_enable);
OFFSET(PARAVIRT_irq_enable_sysexit, paravirt_ops, irq_enable_sysexit);
OFFSET(PARAVIRT_iret, paravirt_ops, iret);
OFFSET(PARAVIRT_read_cr0, paravirt_ops, read_cr0);
#endif
} }
...@@ -62,13 +62,6 @@ DF_MASK = 0x00000400 ...@@ -62,13 +62,6 @@ DF_MASK = 0x00000400
NT_MASK = 0x00004000 NT_MASK = 0x00004000
VM_MASK = 0x00020000 VM_MASK = 0x00020000
/* These are replaces for paravirtualization */
#define DISABLE_INTERRUPTS cli
#define ENABLE_INTERRUPTS sti
#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
#define INTERRUPT_RETURN iret
#define GET_CR0_INTO_EAX movl %cr0, %eax
#ifdef CONFIG_PREEMPT #ifdef CONFIG_PREEMPT
#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF #define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF
#else #else
...@@ -416,6 +409,20 @@ ldt_ss: ...@@ -416,6 +409,20 @@ ldt_ss:
jnz restore_nocheck jnz restore_nocheck
testl $0x00400000, %eax # returning to 32bit stack? testl $0x00400000, %eax # returning to 32bit stack?
jnz restore_nocheck # allright, normal return jnz restore_nocheck # allright, normal return
#ifdef CONFIG_PARAVIRT
/*
* The kernel can't run on a non-flat stack if paravirt mode
* is active. Rather than try to fixup the high bits of
* ESP, bypass this code entirely. This may break DOSemu
* and/or Wine support in a paravirt VM, although the option
* is still available to implement the setting of the high
* 16-bits in the INTERRUPT_RETURN paravirt-op.
*/
cmpl $0, paravirt_ops+PARAVIRT_enabled
jne restore_nocheck
#endif
/* If returning to userspace with 16bit stack, /* If returning to userspace with 16bit stack,
* try to fix the higher word of ESP, as the CPU * try to fix the higher word of ESP, as the CPU
* won't restore it. * won't restore it.
...@@ -833,6 +840,19 @@ nmi_espfix_stack: ...@@ -833,6 +840,19 @@ nmi_espfix_stack:
.previous .previous
KPROBE_END(nmi) KPROBE_END(nmi)
#ifdef CONFIG_PARAVIRT
ENTRY(native_iret)
1: iret
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
.previous
ENTRY(native_irq_enable_sysexit)
sti
sysexit
#endif
KPROBE_ENTRY(int3) KPROBE_ENTRY(int3)
RING0_INT_FRAME RING0_INT_FRAME
pushl $-1 # mark this as an int pushl $-1 # mark this as an int
......
...@@ -381,7 +381,10 @@ void __init init_ISA_irqs (void) ...@@ -381,7 +381,10 @@ void __init init_ISA_irqs (void)
} }
} }
void __init init_IRQ(void) /* Overridden in paravirt.c */
void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
void __init native_init_IRQ(void)
{ {
int i; int i;
......
/* Paravirtualization interfaces
Copyright (C) 2006 Rusty Russell IBM Corporation
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/efi.h>
#include <linux/bcd.h>
#include <asm/bug.h>
#include <asm/paravirt.h>
#include <asm/desc.h>
#include <asm/setup.h>
#include <asm/arch_hooks.h>
#include <asm/time.h>
#include <asm/irq.h>
#include <asm/delay.h>
/* nop stub */
static void native_nop(void)
{
}
static void __init default_banner(void)
{
printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
paravirt_ops.name);
}
char *memory_setup(void)
{
return paravirt_ops.memory_setup();
}
static fastcall unsigned long native_get_debugreg(int regno)
{
unsigned long val = 0; /* Damn you, gcc! */
switch (regno) {
case 0:
asm("movl %%db0, %0" :"=r" (val)); break;
case 1:
asm("movl %%db1, %0" :"=r" (val)); break;
case 2:
asm("movl %%db2, %0" :"=r" (val)); break;
case 3:
asm("movl %%db3, %0" :"=r" (val)); break;
case 6:
asm("movl %%db6, %0" :"=r" (val)); break;
case 7:
asm("movl %%db7, %0" :"=r" (val)); break;
default:
BUG();
}
return val;
}
static fastcall void native_set_debugreg(int regno, unsigned long value)
{
switch (regno) {
case 0:
asm("movl %0,%%db0" : /* no output */ :"r" (value));
break;
case 1:
asm("movl %0,%%db1" : /* no output */ :"r" (value));
break;
case 2:
asm("movl %0,%%db2" : /* no output */ :"r" (value));
break;
case 3:
asm("movl %0,%%db3" : /* no output */ :"r" (value));
break;
case 6:
asm("movl %0,%%db6" : /* no output */ :"r" (value));
break;
case 7:
asm("movl %0,%%db7" : /* no output */ :"r" (value));
break;
default:
BUG();
}
}
void init_IRQ(void)
{
paravirt_ops.init_IRQ();
}
static fastcall void native_clts(void)
{
asm volatile ("clts");
}
static fastcall unsigned long native_read_cr0(void)
{
unsigned long val;
asm volatile("movl %%cr0,%0\n\t" :"=r" (val));
return val;
}
static fastcall void native_write_cr0(unsigned long val)
{
asm volatile("movl %0,%%cr0": :"r" (val));
}
static fastcall unsigned long native_read_cr2(void)
{
unsigned long val;
asm volatile("movl %%cr2,%0\n\t" :"=r" (val));
return val;
}
static fastcall void native_write_cr2(unsigned long val)
{
asm volatile("movl %0,%%cr2": :"r" (val));
}
static fastcall unsigned long native_read_cr3(void)
{
unsigned long val;
asm volatile("movl %%cr3,%0\n\t" :"=r" (val));
return val;
}
static fastcall void native_write_cr3(unsigned long val)
{
asm volatile("movl %0,%%cr3": :"r" (val));
}
static fastcall unsigned long native_read_cr4(void)
{
unsigned long val;
asm volatile("movl %%cr4,%0\n\t" :"=r" (val));
return val;
}
static fastcall unsigned long native_read_cr4_safe(void)
{
unsigned long val;
/* This could fault if %cr4 does not exist */
asm("1: movl %%cr4, %0 \n"
"2: \n"
".section __ex_table,\"a\" \n"
".long 1b,2b \n"
".previous \n"
: "=r" (val): "0" (0));
return val;
}
static fastcall void native_write_cr4(unsigned long val)
{
asm volatile("movl %0,%%cr4": :"r" (val));
}
static fastcall unsigned long native_save_fl(void)
{
unsigned long f;
asm volatile("pushfl ; popl %0":"=g" (f): /* no input */);
return f;
}
static fastcall void native_restore_fl(unsigned long f)
{
asm volatile("pushl %0 ; popfl": /* no output */
:"g" (f)
:"memory", "cc");
}
static fastcall void native_irq_disable(void)
{
asm volatile("cli": : :"memory");
}
static fastcall void native_irq_enable(void)
{
asm volatile("sti": : :"memory");
}
static fastcall void native_safe_halt(void)
{
asm volatile("sti; hlt": : :"memory");
}
static fastcall void native_halt(void)
{
asm volatile("hlt": : :"memory");
}
static fastcall void native_wbinvd(void)
{
asm volatile("wbinvd": : :"memory");
}
static fastcall unsigned long long native_read_msr(unsigned int msr, int *err)
{
unsigned long long val;
asm volatile("2: rdmsr ; xorl %0,%0\n"
"1:\n\t"
".section .fixup,\"ax\"\n\t"
"3: movl %3,%0 ; jmp 1b\n\t"
".previous\n\t"
".section __ex_table,\"a\"\n"
" .align 4\n\t"
" .long 2b,3b\n\t"
".previous"
: "=r" (*err), "=A" (val)
: "c" (msr), "i" (-EFAULT));
return val;
}
static fastcall int native_write_msr(unsigned int msr, unsigned long long val)
{
int err;
asm volatile("2: wrmsr ; xorl %0,%0\n"
"1:\n\t"
".section .fixup,\"ax\"\n\t"
"3: movl %4,%0 ; jmp 1b\n\t"
".previous\n\t"
".section __ex_table,\"a\"\n"
" .align 4\n\t"
" .long 2b,3b\n\t"
".previous"
: "=a" (err)
: "c" (msr), "0" ((u32)val), "d" ((u32)(val>>32)),
"i" (-EFAULT));
return err;
}
static fastcall unsigned long long native_read_tsc(void)
{
unsigned long long val;
asm volatile("rdtsc" : "=A" (val));
return val;
}
static fastcall unsigned long long native_read_pmc(void)
{
unsigned long long val;
asm volatile("rdpmc" : "=A" (val));
return val;
}
static fastcall void native_load_tr_desc(void)
{
asm volatile("ltr %w0"::"q" (GDT_ENTRY_TSS*8));
}
static fastcall void native_load_gdt(const struct Xgt_desc_struct *dtr)
{
asm volatile("lgdt %0"::"m" (*dtr));
}
static fastcall void native_load_idt(const struct Xgt_desc_struct *dtr)
{
asm volatile("lidt %0"::"m" (*dtr));
}
static fastcall void native_store_gdt(struct Xgt_desc_struct *dtr)
{
asm ("sgdt %0":"=m" (*dtr));
}
static fastcall void native_store_idt(struct Xgt_desc_struct *dtr)
{
asm ("sidt %0":"=m" (*dtr));
}
static fastcall unsigned long native_store_tr(void)
{
unsigned long tr;
asm ("str %0":"=r" (tr));
return tr;
}
static fastcall void native_load_tls(struct thread_struct *t, unsigned int cpu)
{
#define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]
C(0); C(1); C(2);
#undef C
}
static inline void native_write_dt_entry(void *dt, int entry, u32 entry_low, u32 entry_high)
{
u32 *lp = (u32 *)((char *)dt + entry*8);
lp[0] = entry_low;
lp[1] = entry_high;
}
static fastcall void native_write_ldt_entry(void *dt, int entrynum, u32 low, u32 high)
{
native_write_dt_entry(dt, entrynum, low, high);
}
static fastcall void native_write_gdt_entry(void *dt, int entrynum, u32 low, u32 high)
{
native_write_dt_entry(dt, entrynum, low, high);
}
static fastcall void native_write_idt_entry(void *dt, int entrynum, u32 low, u32 high)
{
native_write_dt_entry(dt, entrynum, low, high);
}
static fastcall void native_load_esp0(struct tss_struct *tss,
struct thread_struct *thread)
{
tss->esp0 = thread->esp0;
/* This can only happen when SEP is enabled, no need to test "SEP"arately */
if (unlikely(tss->ss1 != thread->sysenter_cs)) {
tss->ss1 = thread->sysenter_cs;
wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
}
}
static fastcall void native_io_delay(void)
{
asm volatile("outb %al,$0x80");
}
/* These are in entry.S */
extern fastcall void native_iret(void);
extern fastcall void native_irq_enable_sysexit(void);
static int __init print_banner(void)
{
paravirt_ops.banner();
return 0;
}
core_initcall(print_banner);
struct paravirt_ops paravirt_ops = {
.name = "bare hardware",
.paravirt_enabled = 0,
.kernel_rpl = 0,
.banner = default_banner,
.arch_setup = native_nop,
.memory_setup = machine_specific_memory_setup,
.get_wallclock = native_get_wallclock,
.set_wallclock = native_set_wallclock,
.time_init = time_init_hook,
.init_IRQ = native_init_IRQ,
.cpuid = native_cpuid,
.get_debugreg = native_get_debugreg,
.set_debugreg = native_set_debugreg,
.clts = native_clts,
.read_cr0 = native_read_cr0,
.write_cr0 = native_write_cr0,
.read_cr2 = native_read_cr2,
.write_cr2 = native_write_cr2,
.read_cr3 = native_read_cr3,
.write_cr3 = native_write_cr3,
.read_cr4 = native_read_cr4,
.read_cr4_safe = native_read_cr4_safe,
.write_cr4 = native_write_cr4,
.save_fl = native_save_fl,
.restore_fl = native_restore_fl,
.irq_disable = native_irq_disable,
.irq_enable = native_irq_enable,
.safe_halt = native_safe_halt,
.halt = native_halt,
.wbinvd = native_wbinvd,
.read_msr = native_read_msr,
.write_msr = native_write_msr,
.read_tsc = native_read_tsc,
.read_pmc = native_read_pmc,
.load_tr_desc = native_load_tr_desc,
.set_ldt = native_set_ldt,
.load_gdt = native_load_gdt,
.load_idt = native_load_idt,
.store_gdt = native_store_gdt,
.store_idt = native_store_idt,
.store_tr = native_store_tr,
.load_tls = native_load_tls,
.write_ldt_entry = native_write_ldt_entry,
.write_gdt_entry = native_write_gdt_entry,
.write_idt_entry = native_write_idt_entry,
.load_esp0 = native_load_esp0,
.set_iopl_mask = native_set_iopl_mask,
.io_delay = native_io_delay,
.const_udelay = __const_udelay,
.irq_enable_sysexit = native_irq_enable_sysexit,
.iret = native_iret,
};
EXPORT_SYMBOL(paravirt_ops);
...@@ -495,6 +495,12 @@ static void set_mca_bus(int x) ...@@ -495,6 +495,12 @@ static void set_mca_bus(int x)
static void set_mca_bus(int x) { } static void set_mca_bus(int x) { }
#endif #endif
/* Overridden in paravirt.c if CONFIG_PARAVIRT */
char * __attribute__((weak)) memory_setup(void)
{
return machine_specific_memory_setup();
}
/* /*
* Determine if we were loaded by an EFI loader. If so, then we have also been * Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures * passed the efi memmap, systab, etc., so we should use these data structures
...@@ -547,7 +553,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -547,7 +553,7 @@ void __init setup_arch(char **cmdline_p)
efi_init(); efi_init();
else { else {
printk(KERN_INFO "BIOS-provided physical RAM map:\n"); printk(KERN_INFO "BIOS-provided physical RAM map:\n");
print_memory_map(machine_specific_memory_setup()); print_memory_map(memory_setup());
} }
copy_edd(); copy_edd();
......
...@@ -33,6 +33,11 @@ ...@@ -33,6 +33,11 @@
* Dave Jones : Report invalid combinations of Athlon CPUs. * Dave Jones : Report invalid combinations of Athlon CPUs.
* Rusty Russell : Hacked into shape for new "hotplug" boot process. */ * Rusty Russell : Hacked into shape for new "hotplug" boot process. */
/* SMP boot always wants to use real time delay to allow sufficient time for
* the APs to come online */
#define USE_REAL_TIME_DELAY
#include <linux/module.h> #include <linux/module.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/kernel.h> #include <linux/kernel.h>
......
...@@ -56,6 +56,7 @@ ...@@ -56,6 +56,7 @@
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/timer.h> #include <asm/timer.h>
#include <asm/time.h>
#include "mach_time.h" #include "mach_time.h"
...@@ -116,10 +117,7 @@ static int set_rtc_mmss(unsigned long nowtime) ...@@ -116,10 +117,7 @@ static int set_rtc_mmss(unsigned long nowtime)
/* gets recalled with irq locally disabled */ /* gets recalled with irq locally disabled */
/* XXX - does irqsave resolve this? -johnstul */ /* XXX - does irqsave resolve this? -johnstul */
spin_lock_irqsave(&rtc_lock, flags); spin_lock_irqsave(&rtc_lock, flags);
if (efi_enabled) retval = set_wallclock(nowtime);
retval = efi_set_rtc_mmss(nowtime);
else
retval = mach_set_rtc_mmss(nowtime);
spin_unlock_irqrestore(&rtc_lock, flags); spin_unlock_irqrestore(&rtc_lock, flags);
return retval; return retval;
...@@ -223,10 +221,7 @@ unsigned long get_cmos_time(void) ...@@ -223,10 +221,7 @@ unsigned long get_cmos_time(void)
spin_lock_irqsave(&rtc_lock, flags); spin_lock_irqsave(&rtc_lock, flags);
if (efi_enabled) retval = get_wallclock();
retval = efi_get_time();
else
retval = mach_get_cmos_time();
spin_unlock_irqrestore(&rtc_lock, flags); spin_unlock_irqrestore(&rtc_lock, flags);
...@@ -370,7 +365,7 @@ static void __init hpet_time_init(void) ...@@ -370,7 +365,7 @@ static void __init hpet_time_init(void)
printk("Using HPET for base-timer\n"); printk("Using HPET for base-timer\n");
} }
time_init_hook(); do_time_init();
} }
#endif #endif
...@@ -392,5 +387,5 @@ void __init time_init(void) ...@@ -392,5 +387,5 @@ void __init time_init(void)
do_settimeofday(&ts); do_settimeofday(&ts);
time_init_hook(); do_time_init();
} }
...@@ -26,8 +26,8 @@ void __save_processor_state(struct saved_context *ctxt) ...@@ -26,8 +26,8 @@ void __save_processor_state(struct saved_context *ctxt)
/* /*
* descriptor tables * descriptor tables
*/ */
store_gdt(&ctxt->gdt_limit); store_gdt(&ctxt->gdt);
store_idt(&ctxt->idt_limit); store_idt(&ctxt->idt);
store_tr(ctxt->tr); store_tr(ctxt->tr);
/* /*
...@@ -99,8 +99,8 @@ void __restore_processor_state(struct saved_context *ctxt) ...@@ -99,8 +99,8 @@ void __restore_processor_state(struct saved_context *ctxt)
* now restore the descriptor tables to their proper values * now restore the descriptor tables to their proper values
* ltr is done i fix_processor_context(). * ltr is done i fix_processor_context().
*/ */
load_gdt(&ctxt->gdt_limit); load_gdt(&ctxt->gdt);
load_idt(&ctxt->idt_limit); load_idt(&ctxt->idt);
/* /*
* segment registers * segment registers
......
...@@ -43,7 +43,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj ...@@ -43,7 +43,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj
* modify the following "#define": (see <asm/io.h> for more info) * modify the following "#define": (see <asm/io.h> for more info)
#define REALLY_SLOW_IO #define REALLY_SLOW_IO
*/ */
#define SLOW_IO_BY_JUMPING /* Looks "better" than dummy write to port 0x80 :-) */
/* use 0 for production, 1 for verification, >2 for debug */ /* use 0 for production, 1 for verification, >2 for debug */
#ifdef DE600_DEBUG #ifdef DE600_DEBUG
......
...@@ -16,6 +16,13 @@ extern void __ndelay(unsigned long nsecs); ...@@ -16,6 +16,13 @@ extern void __ndelay(unsigned long nsecs);
extern void __const_udelay(unsigned long usecs); extern void __const_udelay(unsigned long usecs);
extern void __delay(unsigned long loops); extern void __delay(unsigned long loops);
#if defined(CONFIG_PARAVIRT) && !defined(USE_REAL_TIME_DELAY)
#define udelay(n) paravirt_ops.const_udelay((n) * 0x10c7ul)
#define ndelay(n) paravirt_ops.const_udelay((n) * 5ul)
#else /* !PARAVIRT || USE_REAL_TIME_DELAY */
/* 0x10c7 is 2**32 / 1000000 (rounded up) */ /* 0x10c7 is 2**32 / 1000000 (rounded up) */
#define udelay(n) (__builtin_constant_p(n) ? \ #define udelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \ ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
...@@ -25,6 +32,7 @@ extern void __delay(unsigned long loops); ...@@ -25,6 +32,7 @@ extern void __delay(unsigned long loops);
#define ndelay(n) (__builtin_constant_p(n) ? \ #define ndelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
__ndelay(n)) __ndelay(n))
#endif
void use_tsc_delay(void); void use_tsc_delay(void);
......
...@@ -55,6 +55,9 @@ static inline void pack_gate(__u32 *a, __u32 *b, ...@@ -55,6 +55,9 @@ static inline void pack_gate(__u32 *a, __u32 *b,
#define DESCTYPE_DPL3 0x60 /* DPL-3 */ #define DESCTYPE_DPL3 0x60 /* DPL-3 */
#define DESCTYPE_S 0x10 /* !system */ #define DESCTYPE_S 0x10 /* !system */
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8)) #define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8))
#define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr)) #define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr))
...@@ -105,7 +108,11 @@ static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, const vo ...@@ -105,7 +108,11 @@ static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, const vo
write_gdt_entry(get_cpu_gdt_table(cpu), entry, a, b); write_gdt_entry(get_cpu_gdt_table(cpu), entry, a, b);
} }
static inline void set_ldt(void *addr, unsigned int entries) #define set_ldt native_set_ldt
#endif /* CONFIG_PARAVIRT */
static inline fastcall void native_set_ldt(const void *addr,
unsigned int entries)
{ {
if (likely(entries == 0)) if (likely(entries == 0))
__asm__ __volatile__("lldt %w0"::"q" (0)); __asm__ __volatile__("lldt %w0"::"q" (0));
......
...@@ -256,11 +256,11 @@ static inline void flush_write_buffers(void) ...@@ -256,11 +256,11 @@ static inline void flush_write_buffers(void)
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
#ifdef SLOW_IO_BY_JUMPING #if defined(CONFIG_PARAVIRT)
#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:" #include <asm/paravirt.h>
#else #else
#define __SLOW_DOWN_IO "outb %%al,$0x80;" #define __SLOW_DOWN_IO "outb %%al,$0x80;"
#endif
static inline void slow_down_io(void) { static inline void slow_down_io(void) {
__asm__ __volatile__( __asm__ __volatile__(
...@@ -271,6 +271,8 @@ static inline void slow_down_io(void) { ...@@ -271,6 +271,8 @@ static inline void slow_down_io(void) {
: : ); : : );
} }
#endif
#ifdef CONFIG_X86_NUMAQ #ifdef CONFIG_X86_NUMAQ
extern void *xquad_portio; /* Where the IO area was mapped */ extern void *xquad_portio; /* Where the IO area was mapped */
#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
......
...@@ -41,4 +41,7 @@ extern int irqbalance_disable(char *str); ...@@ -41,4 +41,7 @@ extern int irqbalance_disable(char *str);
extern void fixup_irqs(cpumask_t map); extern void fixup_irqs(cpumask_t map);
#endif #endif
void init_IRQ(void);
void __init native_init_IRQ(void);
#endif /* _ASM_IRQ_H */ #endif /* _ASM_IRQ_H */
...@@ -10,6 +10,9 @@ ...@@ -10,6 +10,9 @@
#ifndef _ASM_IRQFLAGS_H #ifndef _ASM_IRQFLAGS_H
#define _ASM_IRQFLAGS_H #define _ASM_IRQFLAGS_H
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
static inline unsigned long __raw_local_save_flags(void) static inline unsigned long __raw_local_save_flags(void)
...@@ -25,9 +28,6 @@ static inline unsigned long __raw_local_save_flags(void) ...@@ -25,9 +28,6 @@ static inline unsigned long __raw_local_save_flags(void)
return flags; return flags;
} }
#define raw_local_save_flags(flags) \
do { (flags) = __raw_local_save_flags(); } while (0)
static inline void raw_local_irq_restore(unsigned long flags) static inline void raw_local_irq_restore(unsigned long flags)
{ {
__asm__ __volatile__( __asm__ __volatile__(
...@@ -66,18 +66,6 @@ static inline void halt(void) ...@@ -66,18 +66,6 @@ static inline void halt(void)
__asm__ __volatile__("hlt": : :"memory"); __asm__ __volatile__("hlt": : :"memory");
} }
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
return !(flags & (1 << 9));
}
static inline int raw_irqs_disabled(void)
{
unsigned long flags = __raw_local_save_flags();
return raw_irqs_disabled_flags(flags);
}
/* /*
* For spinlocks, etc: * For spinlocks, etc:
*/ */
...@@ -90,9 +78,33 @@ static inline unsigned long __raw_local_irq_save(void) ...@@ -90,9 +78,33 @@ static inline unsigned long __raw_local_irq_save(void)
return flags; return flags;
} }
#else
#define DISABLE_INTERRUPTS cli
#define ENABLE_INTERRUPTS sti
#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
#define INTERRUPT_RETURN iret
#define GET_CR0_INTO_EAX movl %cr0, %eax
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_PARAVIRT */
#ifndef __ASSEMBLY__
#define raw_local_save_flags(flags) \
do { (flags) = __raw_local_save_flags(); } while (0)
#define raw_local_irq_save(flags) \ #define raw_local_irq_save(flags) \
do { (flags) = __raw_local_irq_save(); } while (0) do { (flags) = __raw_local_irq_save(); } while (0)
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
return !(flags & (1 << 9));
}
static inline int raw_irqs_disabled(void)
{
unsigned long flags = __raw_local_save_flags();
return raw_irqs_disabled_flags(flags);
}
#endif /* __ASSEMBLY__ */ #endif /* __ASSEMBLY__ */
/* /*
......
...@@ -2,4 +2,6 @@ ...@@ -2,4 +2,6 @@
/* no action for generic */ /* no action for generic */
#ifndef ARCH_SETUP
#define ARCH_SETUP #define ARCH_SETUP
#endif
#ifndef __ASM_MSR_H #ifndef __ASM_MSR_H
#define __ASM_MSR_H #define __ASM_MSR_H
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
/* /*
* Access to machine-specific registers (available on 586 and better only) * Access to machine-specific registers (available on 586 and better only)
* Note: the rd* operations modify the parameters directly (without using * Note: the rd* operations modify the parameters directly (without using
...@@ -77,6 +81,7 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val) ...@@ -77,6 +81,7 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val)
__asm__ __volatile__("rdpmc" \ __asm__ __volatile__("rdpmc" \
: "=a" (low), "=d" (high) \ : "=a" (low), "=d" (high) \
: "c" (counter)) : "c" (counter))
#endif /* !CONFIG_PARAVIRT */
/* symbolic names for some interesting MSRs */ /* symbolic names for some interesting MSRs */
/* Intel defined MSRs. */ /* Intel defined MSRs. */
......
#ifndef __ASM_PARAVIRT_H
#define __ASM_PARAVIRT_H
/* Various instructions on x86 need to be replaced for
* para-virtualization: those hooks are defined here. */
#include <linux/linkage.h>
#ifdef CONFIG_PARAVIRT
#ifndef __ASSEMBLY__
struct thread_struct;
struct Xgt_desc_struct;
struct tss_struct;
struct paravirt_ops
{
unsigned int kernel_rpl;
int paravirt_enabled;
const char *name;
void (*arch_setup)(void);
char *(*memory_setup)(void);
void (*init_IRQ)(void);
void (*banner)(void);
unsigned long (*get_wallclock)(void);
int (*set_wallclock)(unsigned long);
void (*time_init)(void);
/* All the function pointers here are declared as "fastcall"
so that we get a specific register-based calling
convention. This makes it easier to implement inline
assembler replacements. */
void (fastcall *cpuid)(unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx);
unsigned long (fastcall *get_debugreg)(int regno);
void (fastcall *set_debugreg)(int regno, unsigned long value);
void (fastcall *clts)(void);
unsigned long (fastcall *read_cr0)(void);
void (fastcall *write_cr0)(unsigned long);
unsigned long (fastcall *read_cr2)(void);
void (fastcall *write_cr2)(unsigned long);
unsigned long (fastcall *read_cr3)(void);
void (fastcall *write_cr3)(unsigned long);
unsigned long (fastcall *read_cr4_safe)(void);
unsigned long (fastcall *read_cr4)(void);
void (fastcall *write_cr4)(unsigned long);
unsigned long (fastcall *save_fl)(void);
void (fastcall *restore_fl)(unsigned long);
void (fastcall *irq_disable)(void);
void (fastcall *irq_enable)(void);
void (fastcall *safe_halt)(void);
void (fastcall *halt)(void);
void (fastcall *wbinvd)(void);
/* err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
u64 (fastcall *read_msr)(unsigned int msr, int *err);
int (fastcall *write_msr)(unsigned int msr, u64 val);
u64 (fastcall *read_tsc)(void);
u64 (fastcall *read_pmc)(void);
void (fastcall *load_tr_desc)(void);
void (fastcall *load_gdt)(const struct Xgt_desc_struct *);
void (fastcall *load_idt)(const struct Xgt_desc_struct *);
void (fastcall *store_gdt)(struct Xgt_desc_struct *);
void (fastcall *store_idt)(struct Xgt_desc_struct *);
void (fastcall *set_ldt)(const void *desc, unsigned entries);
unsigned long (fastcall *store_tr)(void);
void (fastcall *load_tls)(struct thread_struct *t, unsigned int cpu);
void (fastcall *write_ldt_entry)(void *dt, int entrynum,
u32 low, u32 high);
void (fastcall *write_gdt_entry)(void *dt, int entrynum,
u32 low, u32 high);
void (fastcall *write_idt_entry)(void *dt, int entrynum,
u32 low, u32 high);
void (fastcall *load_esp0)(struct tss_struct *tss,
struct thread_struct *thread);
void (fastcall *set_iopl_mask)(unsigned mask);
void (fastcall *io_delay)(void);
void (*const_udelay)(unsigned long loops);
/* These two are jmp to, not actually called. */
void (fastcall *irq_enable_sysexit)(void);
void (fastcall *iret)(void);
};
extern struct paravirt_ops paravirt_ops;
#define paravirt_enabled() (paravirt_ops.paravirt_enabled)
static inline void load_esp0(struct tss_struct *tss,
struct thread_struct *thread)
{
paravirt_ops.load_esp0(tss, thread);
}
#define ARCH_SETUP paravirt_ops.arch_setup();
static inline unsigned long get_wallclock(void)
{
return paravirt_ops.get_wallclock();
}
static inline int set_wallclock(unsigned long nowtime)
{
return paravirt_ops.set_wallclock(nowtime);
}
static inline void do_time_init(void)
{
return paravirt_ops.time_init();
}
/* The paravirtualized CPUID instruction. */
static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx)
{
paravirt_ops.cpuid(eax, ebx, ecx, edx);
}
/*
* These special macros can be used to get or set a debugging register
*/
#define get_debugreg(var, reg) var = paravirt_ops.get_debugreg(reg)
#define set_debugreg(val, reg) paravirt_ops.set_debugreg(reg, val)
#define clts() paravirt_ops.clts()
#define read_cr0() paravirt_ops.read_cr0()
#define write_cr0(x) paravirt_ops.write_cr0(x)
#define read_cr2() paravirt_ops.read_cr2()
#define write_cr2(x) paravirt_ops.write_cr2(x)
#define read_cr3() paravirt_ops.read_cr3()
#define write_cr3(x) paravirt_ops.write_cr3(x)
#define read_cr4() paravirt_ops.read_cr4()
#define read_cr4_safe(x) paravirt_ops.read_cr4_safe()
#define write_cr4(x) paravirt_ops.write_cr4(x)
static inline unsigned long __raw_local_save_flags(void)
{
return paravirt_ops.save_fl();
}
static inline void raw_local_irq_restore(unsigned long flags)
{
return paravirt_ops.restore_fl(flags);
}
static inline void raw_local_irq_disable(void)
{
paravirt_ops.irq_disable();
}
static inline void raw_local_irq_enable(void)
{
paravirt_ops.irq_enable();
}
static inline unsigned long __raw_local_irq_save(void)
{
unsigned long flags = paravirt_ops.save_fl();
paravirt_ops.irq_disable();
return flags;
}
static inline void raw_safe_halt(void)
{
paravirt_ops.safe_halt();
}
static inline void halt(void)
{
paravirt_ops.safe_halt();
}
#define wbinvd() paravirt_ops.wbinvd()
#define get_kernel_rpl() (paravirt_ops.kernel_rpl)
#define rdmsr(msr,val1,val2) do { \
int _err; \
u64 _l = paravirt_ops.read_msr(msr,&_err); \
val1 = (u32)_l; \
val2 = _l >> 32; \
} while(0)
#define wrmsr(msr,val1,val2) do { \
u64 _l = ((u64)(val2) << 32) | (val1); \
paravirt_ops.write_msr((msr), _l); \
} while(0)
#define rdmsrl(msr,val) do { \
int _err; \
val = paravirt_ops.read_msr((msr),&_err); \
} while(0)
#define wrmsrl(msr,val) (paravirt_ops.write_msr((msr),(val)))
#define wrmsr_safe(msr,a,b) ({ \
u64 _l = ((u64)(b) << 32) | (a); \
paravirt_ops.write_msr((msr),_l); \
})
/* rdmsr with exception handling */
#define rdmsr_safe(msr,a,b) ({ \
int _err; \
u64 _l = paravirt_ops.read_msr(msr,&_err); \
(*a) = (u32)_l; \
(*b) = _l >> 32; \
_err; })
#define rdtsc(low,high) do { \
u64 _l = paravirt_ops.read_tsc(); \
low = (u32)_l; \
high = _l >> 32; \
} while(0)
#define rdtscl(low) do { \
u64 _l = paravirt_ops.read_tsc(); \
low = (int)_l; \
} while(0)
#define rdtscll(val) (val = paravirt_ops.read_tsc())
#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
#define rdpmc(counter,low,high) do { \
u64 _l = paravirt_ops.read_pmc(); \
low = (u32)_l; \
high = _l >> 32; \
} while(0)
#define load_TR_desc() (paravirt_ops.load_tr_desc())
#define load_gdt(dtr) (paravirt_ops.load_gdt(dtr))
#define load_idt(dtr) (paravirt_ops.load_idt(dtr))
#define set_ldt(addr, entries) (paravirt_ops.set_ldt((addr), (entries)))
#define store_gdt(dtr) (paravirt_ops.store_gdt(dtr))
#define store_idt(dtr) (paravirt_ops.store_idt(dtr))
#define store_tr(tr) ((tr) = paravirt_ops.store_tr())
#define load_TLS(t,cpu) (paravirt_ops.load_tls((t),(cpu)))
#define write_ldt_entry(dt, entry, low, high) \
(paravirt_ops.write_ldt_entry((dt), (entry), (low), (high)))
#define write_gdt_entry(dt, entry, low, high) \
(paravirt_ops.write_gdt_entry((dt), (entry), (low), (high)))
#define write_idt_entry(dt, entry, low, high) \
(paravirt_ops.write_idt_entry((dt), (entry), (low), (high)))
#define set_iopl_mask(mask) (paravirt_ops.set_iopl_mask(mask))
/* The paravirtualized I/O functions */
static inline void slow_down_io(void) {
paravirt_ops.io_delay();
#ifdef REALLY_SLOW_IO
paravirt_ops.io_delay();
paravirt_ops.io_delay();
paravirt_ops.io_delay();
#endif
}
#define CLI_STRING "pushl %eax; pushl %ecx; pushl %edx; call *paravirt_ops+PARAVIRT_irq_disable; popl %edx; popl %ecx; popl %eax"
#define STI_STRING "pushl %eax; pushl %ecx; pushl %edx; call *paravirt_ops+PARAVIRT_irq_enable; popl %edx; popl %ecx; popl %eax"
#else /* __ASSEMBLY__ */
#define INTERRUPT_RETURN jmp *%cs:paravirt_ops+PARAVIRT_iret
#define DISABLE_INTERRUPTS pushl %eax; pushl %ecx; pushl %edx; call *paravirt_ops+PARAVIRT_irq_disable; popl %edx; popl %ecx; popl %eax
#define ENABLE_INTERRUPTS pushl %eax; pushl %ecx; pushl %edx; call *%cs:paravirt_ops+PARAVIRT_irq_enable; popl %edx; popl %ecx; popl %eax
#define ENABLE_INTERRUPTS_SYSEXIT jmp *%cs:paravirt_ops+PARAVIRT_irq_enable_sysexit
#define GET_CR0_INTO_EAX call *paravirt_ops+PARAVIRT_read_cr0
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_PARAVIRT */
#endif /* __ASM_PARAVIRT_H */
...@@ -144,8 +144,8 @@ static inline void detect_ht(struct cpuinfo_x86 *c) {} ...@@ -144,8 +144,8 @@ static inline void detect_ht(struct cpuinfo_x86 *c) {}
#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */ #define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */
#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */ #define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */
static inline void __cpuid(unsigned int *eax, unsigned int *ebx, static inline fastcall void native_cpuid(unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx) unsigned int *ecx, unsigned int *edx)
{ {
/* ecx is often an input as well as an output. */ /* ecx is often an input as well as an output. */
__asm__("cpuid" __asm__("cpuid"
...@@ -491,6 +491,12 @@ struct thread_struct { ...@@ -491,6 +491,12 @@ struct thread_struct {
.io_bitmap = { [ 0 ... IO_BITMAP_LONGS] = ~0 }, \ .io_bitmap = { [ 0 ... IO_BITMAP_LONGS] = ~0 }, \
} }
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define paravirt_enabled() 0
#define __cpuid native_cpuid
static inline void load_esp0(struct tss_struct *tss, struct thread_struct *thread) static inline void load_esp0(struct tss_struct *tss, struct thread_struct *thread)
{ {
tss->esp0 = thread->esp0; tss->esp0 = thread->esp0;
...@@ -524,10 +530,13 @@ static inline void load_esp0(struct tss_struct *tss, struct thread_struct *threa ...@@ -524,10 +530,13 @@ static inline void load_esp0(struct tss_struct *tss, struct thread_struct *threa
: /* no output */ \ : /* no output */ \
:"r" (value)) :"r" (value))
#define set_iopl_mask native_set_iopl_mask
#endif /* CONFIG_PARAVIRT */
/* /*
* Set IOPL bits in EFLAGS from given mask * Set IOPL bits in EFLAGS from given mask
*/ */
static inline void set_iopl_mask(unsigned mask) static fastcall inline void native_set_iopl_mask(unsigned mask)
{ {
unsigned int reg; unsigned int reg;
__asm__ __volatile__ ("pushfl;" __asm__ __volatile__ ("pushfl;"
......
...@@ -131,5 +131,7 @@ ...@@ -131,5 +131,7 @@
#define SEGMENT_LDT 0x4 #define SEGMENT_LDT 0x4
#define SEGMENT_GDT 0x0 #define SEGMENT_GDT 0x0
#ifndef CONFIG_PARAVIRT
#define get_kernel_rpl() 0 #define get_kernel_rpl() 0
#endif #endif
#endif
...@@ -70,6 +70,7 @@ extern unsigned char boot_params[PARAM_SIZE]; ...@@ -70,6 +70,7 @@ extern unsigned char boot_params[PARAM_SIZE];
struct e820entry; struct e820entry;
char * __init machine_specific_memory_setup(void); char * __init machine_specific_memory_setup(void);
char *memory_setup(void);
int __init copy_e820_map(struct e820entry * biosmap, int nr_map); int __init copy_e820_map(struct e820entry * biosmap, int nr_map);
int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map); int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map);
......
...@@ -7,8 +7,12 @@ ...@@ -7,8 +7,12 @@
#include <asm/processor.h> #include <asm/processor.h>
#include <linux/compiler.h> #include <linux/compiler.h>
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define CLI_STRING "cli" #define CLI_STRING "cli"
#define STI_STRING "sti" #define STI_STRING "sti"
#endif /* CONFIG_PARAVIRT */
/* /*
* Your basic SMP spinlocks, allowing only a single CPU anywhere * Your basic SMP spinlocks, allowing only a single CPU anywhere
......
...@@ -23,12 +23,8 @@ arch_prepare_suspend(void) ...@@ -23,12 +23,8 @@ arch_prepare_suspend(void)
struct saved_context { struct saved_context {
u16 es, fs, gs, ss; u16 es, fs, gs, ss;
unsigned long cr0, cr2, cr3, cr4; unsigned long cr0, cr2, cr3, cr4;
u16 gdt_pad; struct Xgt_desc_struct gdt;
u16 gdt_limit; struct Xgt_desc_struct idt;
unsigned long gdt_base;
u16 idt_pad;
u16 idt_limit;
unsigned long idt_base;
u16 ldt; u16 ldt;
u16 tss; u16 tss;
unsigned long tr; unsigned long tr;
......
...@@ -88,6 +88,9 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ ...@@ -88,6 +88,9 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \
#define savesegment(seg, value) \ #define savesegment(seg, value) \
asm volatile("mov %%" #seg ",%0":"=rm" (value)) asm volatile("mov %%" #seg ",%0":"=rm" (value))
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define read_cr0() ({ \ #define read_cr0() ({ \
unsigned int __dummy; \ unsigned int __dummy; \
__asm__ __volatile__( \ __asm__ __volatile__( \
...@@ -139,17 +142,18 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \ ...@@ -139,17 +142,18 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \
#define write_cr4(x) \ #define write_cr4(x) \
__asm__ __volatile__("movl %0,%%cr4": :"r" (x)) __asm__ __volatile__("movl %0,%%cr4": :"r" (x))
/* #define wbinvd() \
* Clear and set 'TS' bit respectively __asm__ __volatile__ ("wbinvd": : :"memory")
*/
/* Clear the 'TS' bit */
#define clts() __asm__ __volatile__ ("clts") #define clts() __asm__ __volatile__ ("clts")
#endif/* CONFIG_PARAVIRT */
/* Set the 'TS' bit */
#define stts() write_cr0(8 | read_cr0()) #define stts() write_cr0(8 | read_cr0())
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
#define wbinvd() \
__asm__ __volatile__ ("wbinvd": : :"memory")
static inline unsigned long get_limit(unsigned long segment) static inline unsigned long get_limit(unsigned long segment)
{ {
unsigned long __limit; unsigned long __limit;
......
#ifndef _ASMi386_TIME_H
#define _ASMi386_TIME_H
#include <linux/efi.h>
#include "mach_time.h"
static inline unsigned long native_get_wallclock(void)
{
unsigned long retval;
if (efi_enabled)
retval = efi_get_time();
else
retval = mach_get_cmos_time();
return retval;
}
static inline int native_set_wallclock(unsigned long nowtime)
{
int retval;
if (efi_enabled)
retval = efi_set_rtc_mmss(nowtime);
else
retval = mach_set_rtc_mmss(nowtime);
return retval;
}
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else /* !CONFIG_PARAVIRT */
#define get_wallclock() native_get_wallclock()
#define set_wallclock(x) native_set_wallclock(x)
#define do_time_init() time_init_hook()
#endif /* CONFIG_PARAVIRT */
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment