Skip to content

L
linux-davinci
Commit ca61f10a authored by James Bottomley's avatar James Bottomley
Browse files
Options

[SCSI] remove broken driver cpqfc 

Hopefully there should be a brand new replacement driver for this heap
of junk by the beginning of next year.

Acked By: Martin K. Petersen <mkp@mkp.net>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 80e23bab
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 13274 deletions
drivers/scsi/Kconfig
View file @ ca61f10a
......@@ -620,19 +620,6 @@ config SCSI_OMIT_FLASHPOINT
substantial, so users of MultiMaster Host Adapters may wish to omit
it.
#
# This is marked broken because it uses over 4kB of stack in
# just two routines:
# 2076 CpqTsProcessIMQEntry
# 2052 PeekIMQEntry
#
config SCSI_CPQFCTS
tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
depends on PCI && SCSI && BROKEN
help
Say Y here to compile in support for the Compaq StorageWorks Fibre
Channel 64-bit/66Mhz Host Bus Adapter.
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
......
drivers/scsi/Makefile
View file @ ca61f10a
......@@ -120,7 +120,6 @@ obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o
obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
obj-$(CONFIG_SCSI_FCAL) += fcal.o
obj-$(CONFIG_SCSI_CPQFCTS) += cpqfc.o
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
obj-$(CONFIG_SCSI_IPR) += ipr.o
......@@ -165,8 +164,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
cpqfc-objs := cpqfcTSinit.o cpqfcTScontrol.o cpqfcTSi2c.o \
cpqfcTSworker.o cpqfcTStrigger.o
libata-objs := libata-core.o libata-scsi.o
# Files generated that shall be removed upon make clean
......
drivers/scsi/cpqfcTS.h deleted 100644 → 0
View file @ 80e23bab
#ifndef CPQFCTS_H
#define CPQFCTS_H
#include "cpqfcTSstructs.h"
// These functions are required by the Linux SCSI layers
extern int cpqfcTS_detect(Scsi_Host_Template *);
extern int cpqfcTS_release(struct Scsi_Host *);
extern const char * cpqfcTS_info(struct Scsi_Host *);
extern int cpqfcTS_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
extern int cpqfcTS_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
extern int cpqfcTS_abort(Scsi_Cmnd *);
extern int cpqfcTS_reset(Scsi_Cmnd *, unsigned int);
extern int cpqfcTS_eh_abort(Scsi_Cmnd *Cmnd);
extern int cpqfcTS_eh_device_reset(Scsi_Cmnd *);
extern int cpqfcTS_biosparam(struct scsi_device *, struct block_device *,
sector_t, int[]);
extern int cpqfcTS_ioctl( Scsi_Device *ScsiDev, int Cmnd, void *arg);
#endif /* CPQFCTS_H */
drivers/scsi/cpqfcTSchip.h deleted 100644 → 0
View file @ 80e23bab
/* Copyright(c) 2000, Compaq Computer Corporation
* Fibre Channel Host Bus Adapter
* 64-bit, 66MHz PCI
* Originally developed and tested on:
* (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ...
* SP# P225CXCBFIEL6T, Rev XC
* SP# 161290-001, Rev XD
* (back): Board No. 010008-001 A/W Rev X5, FAB REV X5
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
* Written by Don Zimmerman
*/
#ifndef CPQFCTSCHIP_H
#define CPQFCTSCHIP_H
#ifndef TACHYON_CHIP_INC
// FC-PH (Physical) specification levels for Login payloads
// NOTE: These are NOT strictly complied with by any FC vendors
#define FC_PH42 0x08
#define FC_PH43 0x09
#define FC_PH3 0x20
#define TACHLITE_TS_RX_SIZE 1024 // max inbound frame size
// "I" prefix is for Include
#define IVENDID 0x00 // word
#define IDEVID 0x02
#define ITLCFGCMD 0x04
#define IMEMBASE 0x18 // Tachyon
#define ITLMEMBASE 0x1C // Tachlite
#define IIOBASEL 0x10 // Tachyon I/O base address, lower 256 bytes
#define IIOBASEU 0x14 // Tachyon I/O base address, upper 256 bytes
#define ITLIOBASEL 0x14 // TachLite I/O base address, lower 256 bytes
#define ITLIOBASEU 0x18 // TachLite I/O base address, upper 256 bytes
#define ITLRAMBASE 0x20 // TL on-board RAM start
#define ISROMBASE 0x24
#define IROMBASE 0x30
#define ICFGCMD 0x04 // PCI config - PCI config access (word)
#define ICFGSTAT 0x06 // PCI status (R - word)
#define IRCTR_WCTR 0x1F2 // ROM control / pre-fetch wait counter
#define IPCIMCTR 0x1F3 // PCI master control register
#define IINTPEND 0x1FD // Interrupt pending (I/O Upper - Tachyon & TL)
#define IINTEN 0x1FE // Interrupt enable (I/O Upper - Tachyon & TL)
#define IINTSTAT 0x1FF // Interrupt status (I/O Upper - Tachyon & TL)
#define IMQ_BASE 0x80
#define IMQ_LENGTH 0x84
#define IMQ_CONSUMER_INDEX 0x88
#define IMQ_PRODUCER_INDEX 0x8C // Tach copies its INDX to bits 0-7 of value
/*
// IOBASE UPPER
#define SFSBQ_BASE 0x00 // single-frame sequences
#define SFSBQ_LENGTH 0x04
#define SFSBQ_PRODUCER_INDEX 0x08
#define SFSBQ_CONSUMER_INDEX 0x0C // (R)
#define SFS_BUFFER_LENGTH 0X10
// SCSI-FCP hardware assists
#define SEST_BASE 0x40 // SSCI Exchange State Table
#define SEST_LENGTH 0x44
#define SCSI_BUFFER_LENGTH 0x48
#define SEST_LINKED_LIST 0x4C
#define TACHYON_My_ID 0x6C
#define TACHYON_CONFIGURATION 0x84 // (R/W) reset val 2
#define TACHYON_CONTROL 0x88
#define TACHYON_STATUS 0x8C // (R)
#define TACHYON_FLUSH_SEST 0x90 // (R/W)
#define TACHYON_EE_CREDIT_TMR 0x94 // (R)
#define TACHYON_BB_CREDIT_TMR 0x98 // (R)
#define TACHYON_RCV_FRAME_ERR 0x9C // (R)
#define FRAME_MANAGER_CONFIG 0xC0 // (R/W)
#define FRAME_MANAGER_CONTROL 0xC4
#define FRAME_MANAGER_STATUS 0xC8 // (R)
#define FRAME_MANAGER_ED_TOV 0xCC
#define FRAME_MANAGER_LINK_ERR1 0xD0 // (R)
#define FRAME_MANAGER_LINK_ERR2 0xD4 // (R)
#define FRAME_MANAGER_TIMEOUT2 0xD8 // (W)
#define FRAME_MANAGER_BB_CREDIT 0xDC // (R)
#define FRAME_MANAGER_WWN_HI 0xE0 // (R/W)
#define FRAME_MANAGER_WWN_LO 0xE4 // (R/W)
#define FRAME_MANAGER_RCV_AL_PA 0xE8 // (R)
#define FRAME_MANAGER_PRIMITIVE 0xEC // {K28.5} byte1 byte2 byte3
*/
#define TL_MEM_ERQ_BASE 0x0 //ERQ Base
#define TL_IO_ERQ_BASE 0x0 //ERQ base
#define TL_MEM_ERQ_LENGTH 0x4 //ERQ Length
#define TL_IO_ERQ_LENGTH 0x4 //ERQ Length
#define TL_MEM_ERQ_PRODUCER_INDEX 0x8 //ERQ Producer Index register
#define TL_IO_ERQ_PRODUCER_INDEX 0x8 //ERQ Producer Index register
#define TL_MEM_ERQ_CONSUMER_INDEX_ADR 0xC //ERQ Consumer Index address register
#define TL_IO_ERQ_CONSUMER_INDEX_ADR 0xC //ERQ Consumer Index address register
#define TL_MEM_ERQ_CONSUMER_INDEX 0xC //ERQ Consumer Index
#define TL_IO_ERQ_CONSUMER_INDEX 0xC //ERQ Consumer Index
#define TL_MEM_SFQ_BASE 0x50 //SFQ Base
#define TL_IO_SFQ_BASE 0x50 //SFQ base
#define TL_MEM_SFQ_LENGTH 0x54 //SFQ Length
#define TL_IO_SFQ_LENGTH 0x54 //SFQ Length
#define TL_MEM_SFQ_CONSUMER_INDEX 0x58 //SFQ Consumer Index
#define TL_IO_SFQ_CONSUMER_INDEX 0x58 //SFQ Consumer Index
#define TL_MEM_IMQ_BASE 0x80 //IMQ Base
#define TL_IO_IMQ_BASE 0x80 //IMQ base
#define TL_MEM_IMQ_LENGTH 0x84 //IMQ Length
#define TL_IO_IMQ_LENGTH 0x84 //IMQ Length
#define TL_MEM_IMQ_CONSUMER_INDEX 0x88 //IMQ Consumer Index
#define TL_IO_IMQ_CONSUMER_INDEX 0x88 //IMQ Consumer Index
#define TL_MEM_IMQ_PRODUCER_INDEX_ADR 0x8C //IMQ Producer Index address register
#define TL_IO_IMQ_PRODUCER_INDEX_ADR 0x8C //IMQ Producer Index address register
#define TL_MEM_SEST_BASE 0x140 //SFQ Base
#define TL_IO_SEST_BASE 0x40 //SFQ base
#define TL_MEM_SEST_LENGTH 0x144 //SFQ Length
#define TL_IO_SEST_LENGTH 0x44 //SFQ Length
#define TL_MEM_SEST_LINKED_LIST 0x14C
#define TL_MEM_SEST_SG_PAGE 0x168 // Extended Scatter/Gather page size
#define TL_MEM_TACH_My_ID 0x16C
#define TL_IO_TACH_My_ID 0x6C //My AL_PA ID
#define TL_MEM_TACH_CONFIG 0x184 //Tachlite Configuration register
#define TL_IO_CONFIG 0x84 //Tachlite Configuration register
#define TL_MEM_TACH_CONTROL 0x188 //Tachlite Control register
#define TL_IO_CTR 0x88 //Tachlite Control register
#define TL_MEM_TACH_STATUS 0x18C //Tachlite Status register
#define TL_IO_STAT 0x8C //Tachlite Status register
#define TL_MEM_FM_CONFIG 0x1C0 //Frame Manager Configuration register
#define TL_IO_FM_CONFIG 0xC0 //Frame Manager Configuration register
#define TL_MEM_FM_CONTROL 0x1C4 //Frame Manager Control
#define TL_IO_FM_CTL 0xC4 //Frame Manager Control
#define TL_MEM_FM_STATUS 0x1C8 //Frame Manager Status
#define TL_IO_FM_STAT 0xC8 //Frame Manager Status
#define TL_MEM_FM_LINK_STAT1 0x1D0 //Frame Manager Link Status 1
#define TL_IO_FM_LINK_STAT1 0xD0 //Frame Manager Link Status 1
#define TL_MEM_FM_LINK_STAT2 0x1D4 //Frame Manager Link Status 2
#define TL_IO_FM_LINK_STAT2 0xD4 //Frame Manager Link Status 2
#define TL_MEM_FM_TIMEOUT2 0x1D8 // (W)
#define TL_MEM_FM_BB_CREDIT0 0x1DC
#define TL_MEM_FM_WWN_HI 0x1E0 //Frame Manager World Wide Name High
#define TL_IO_FM_WWN_HI 0xE0 //Frame Manager World Wide Name High
#define TL_MEM_FM_WWN_LO 0x1E4 //Frame Manager World Wide Name LOW
#define TL_IO_FM_WWN_LO 0xE4 //Frame Manager World Wide Name Low
#define TL_MEM_FM_RCV_AL_PA 0x1E8 //Frame Manager AL_PA Received register
#define TL_IO_FM_ALPA 0xE8 //Frame Manager AL_PA Received register
#define TL_MEM_FM_ED_TOV 0x1CC
#define TL_IO_ROMCTR 0xFA //TL PCI ROM Control Register
#define TL_IO_PCIMCTR 0xFB //TL PCI Master Control Register
#define TL_IO_SOFTRST 0xFC //Tachlite Configuration register
#define TL_MEM_SOFTRST 0x1FC //Tachlite Configuration register
// completion message types (bit 8 set means Interrupt generated)
// CM_Type
#define OUTBOUND_COMPLETION 0
#define ERROR_IDLE_COMPLETION 0x01
#define OUT_HI_PRI_COMPLETION 0x01
#define INBOUND_MFS_COMPLETION 0x02
#define INBOUND_000_COMPLETION 0x03
#define INBOUND_SFS_COMPLETION 0x04 // Tachyon & TachLite
#define ERQ_FROZEN_COMPLETION 0x06 // TachLite
#define INBOUND_C1_TIMEOUT 0x05
#define INBOUND_BUSIED_FRAME 0x06
#define SFS_BUF_WARN 0x07
#define FCP_FROZEN_COMPLETION 0x07 // TachLite
#define MFS_BUF_WARN 0x08
#define IMQ_BUF_WARN 0x09
#define FRAME_MGR_INTERRUPT 0x0A
#define READ_STATUS 0x0B
#define INBOUND_SCSI_DATA_COMPLETION 0x0C
#define INBOUND_FCP_XCHG_COMPLETION 0x0C // TachLite
#define INBOUND_SCSI_DATA_COMMAND 0x0D
#define BAD_SCSI_FRAME 0x0E
#define INB_SCSI_STATUS_COMPLETION 0x0F
#define BUFFER_PROCESSED_COMPLETION 0x11
// FC-AL (Tachyon) Loop Port State Machine defs
// (loop "Up" states)
#define MONITORING 0x0
#define ARBITRATING 0x1
#define ARBITRAT_WON 0x2
#define OPEN 0x3
#define OPENED 0x4
#define XMITTD_CLOSE 0x5
#define RCVD_CLOSE 0x6
#define TRANSFER 0x7
// (loop "Down" states)
#define INITIALIZING 0x8
#define O_I_INIT 0x9
#define O_I_PROTOCOL 0xa
#define O_I_LIP_RCVD 0xb
#define HOST_CONTROL 0xc
#define LOOP_FAIL 0xd
// (no 0xe)
#define OLD_PORT 0xf
#define TACHYON_CHIP_INC
#endif
#endif /* CPQFCTSCHIP_H */
drivers/scsi/cpqfcTScontrol.c deleted 100644 → 0
View file @ 80e23bab
This diff is collapsed.
drivers/scsi/cpqfcTSi2c.c deleted 100644 → 0
View file @ 80e23bab
This diff is collapsed.
drivers/scsi/cpqfcTSinit.c deleted 100644 → 0
View file @ 80e23bab
This diff is collapsed.
drivers/scsi/cpqfcTSioctl.h deleted 100644 → 0
View file @ 80e23bab
// for user apps, make sure data size types are defined
// with
#define CCPQFCTS_IOC_MAGIC 'Z'
typedef struct
{
__u8 bus;
__u8 dev_fn;
__u32 board_id;
} cpqfc_pci_info_struct;
typedef __u32 DriverVer_type;
/*
typedef union
{
struct // Peripheral Unit Device
{
__u8 Bus:6;
__u8 Mode:2; // b00
__u8 Dev;
} PeripDev;
struct // Volume Set Address
{
__u8 DevMSB:6;
__u8 Mode:2; // b01
__u8 DevLSB;
} LogDev;
struct // Logical Unit Device (SCSI-3, SCC-2 defined)
{
__u8 Targ:6;
__u8 Mode:2; // b10
__u8 Dev:5;
__u8 Bus:3;
} LogUnit;
} SCSI3Addr_struct;
typedef struct
{
SCSI3Addr_struct FCP_Nexus;
__u8 cdb[16];
} PassThru_Command_struct;
*/
/* this is nearly duplicated in idashare.h */
typedef struct {
int lc; /* Controller number */
int node; /* Node (box) number */
int ld; /* Logical Drive on this box, if required */
__u32 nexus; /* SCSI Nexus */
void *argp; /* Argument pointer */
} VENDOR_IOCTL_REQ;
typedef struct {
char cdb[16]; /* SCSI CDB for the pass-through */
ushort bus; /* Target bus on the box */
ushort pdrive; /* Physical drive on the box */
int len; /* Length of the data area of the CDB */
int sense_len; /* Length of the sense data */
char sense_data[40]; /* Sense data */
void *bufp; /* Data area for the CDB */
char rw_flag; /* Read CDB or Write CDB */
} cpqfc_passthru_t;
/*
** Defines for the IOCTLS.
*/
#define VENDOR_READ_OPCODE 0x26
#define VENDOR_WRITE_OPCODE 0x27
#define CPQFCTS_GETPCIINFO _IOR( CCPQFCTS_IOC_MAGIC, 1, cpqfc_pci_info_struct)
#define CPQFCTS_GETDRIVVER _IOR( CCPQFCTS_IOC_MAGIC, 9, DriverVer_type)
#define CPQFCTS_SCSI_PASSTHRU _IOWR( CCPQFCTS_IOC_MAGIC,11, VENDOR_IOCTL_REQ)
/* We would rather have equivalent generic, low-level driver agnostic
ioctls that do what CPQFC_IOCTL_FC_TARGET_ADDRESS and
CPQFC_IOCTL_FC_TDR 0x5388 do, but currently, we do not have them,
consequently applications would have to know they are talking to cpqfc. */
/* Used to get Fibre Channel WWN and port_id from device */
// #define CPQFC_IOCTL_FC_TARGET_ADDRESS 0x5387
#define CPQFC_IOCTL_FC_TARGET_ADDRESS \
_IOR( CCPQFCTS_IOC_MAGIC, 13, Scsi_FCTargAddress)
/* Used to invoke Target Defice Reset for Fibre Channel */
// #define CPQFC_IOCTL_FC_TDR 0x5388
#define CPQFC_IOCTL_FC_TDR _IO( CCPQFCTS_IOC_MAGIC, 15)
drivers/scsi/cpqfcTSstructs.h deleted 100644 → 0
View file @ 80e23bab
This diff is collapsed.
drivers/scsi/cpqfcTStrigger.c deleted 100644 → 0
View file @ 80e23bab
// Routine to trigger Finisar GTA analyzer. Runs of GPIO2
// NOTE: DEBUG ONLY! Could interfere with FCMNGR/Miniport operation
// since it writes directly to the Tachyon board. This function
// developed for Compaq HBA Tachyon TS v1.2 (Rev X5 PCB)
#include "cpqfcTStrigger.h"
#if TRIGGERABLE_HBA
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
void TriggerHBA( void* IOBaseUpper, int Print)
{
__u32 long value;
// get initial value in hopes of not modifying any other GPIO line
IOBaseUpper += 0x188; // TachTL/TS Control reg
value = readl( IOBaseUpper);
// set HIGH to trigger external analyzer (tested on Dolche Finisar 1Gb GTA)
// The Finisar anaylzer triggers on low-to-high TTL transition
value |= 0x01; // set bit 0
writel( value, IOBaseUpper);
if( Print)
printk( " -GPIO0 set- ");
}
#endif
drivers/scsi/cpqfcTStrigger.h deleted 100644 → 0
View file @ 80e23bab
// don't do this unless you have the right hardware!
#define TRIGGERABLE_HBA 0
#if TRIGGERABLE_HBA
void TriggerHBA( void*, int);
#else
#define TriggerHBA(x, y)
#endif
drivers/scsi/cpqfcTSworker.c deleted 100644 → 0
View file @ 80e23bab
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment