Staging: comedi: Move trailing statements to next line as requested by checkpatch

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/comedi/drivers/s626.c

@@ -749,7 +749,8 @@ static int s626_attach(comedi_device *dev, comedi_devconfig *it)
 		/*  Write I2C control: abort any I2C activity. */
 		MC_ENABLE(P_MC2, MC2_UPLD_IIC);
 		/*  Invoke command  upload */
-		while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0);
+		while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0)
+			;
 		/*  and wait for upload to complete. */
 
 		/* Per SAA7146 data sheet, write to STATUS reg twice to
@@ -758,7 +759,8 @@ static int s626_attach(comedi_device *dev, comedi_devconfig *it)
 			WR7146(P_I2CSTAT, I2C_CLKSEL);
 			/*  Write I2C control: reset  error flags. */
 			MC_ENABLE(P_MC2, MC2_UPLD_IIC);	/*  Invoke command upload */
-			while (!MC_TEST(P_MC2, MC2_UPLD_IIC));
+			while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
+				;
 			/* and wait for upload to complete. */
 		}
 
@@ -1592,7 +1594,8 @@ static int s626_ai_insn_read(comedi_device *dev, comedi_subdevice *s,
 		/*  shift into FB BUFFER 1 register. */
 
 		/*  Wait for ADC done. */
-		while (!(RR7146(P_PSR) & PSR_GPIO2)) ;
+		while (!(RR7146(P_PSR) & PSR_GPIO2))
+			;
 
 		/*  Fetch ADC data. */
 		if (n != 0)
@@ -1624,7 +1627,8 @@ static int s626_ai_insn_read(comedi_device *dev, comedi_subdevice *s,
 	/*  Wait for the data to arrive in FB BUFFER 1 register. */
 
 	/*  Wait for ADC done. */
-	while (!(RR7146(P_PSR) & PSR_GPIO2)) ;
+	while (!(RR7146(P_PSR) & PSR_GPIO2))
+		;
 
 	/*  Fetch ADC data from audio interface's input shift register. */
 
@@ -2462,10 +2466,12 @@ static uint32_t I2Chandshake(comedi_device *dev, uint32_t val)
 	/*  upload confirmation. */
 
 	MC_ENABLE(P_MC2, MC2_UPLD_IIC);
-	while (!MC_TEST(P_MC2, MC2_UPLD_IIC)) ;
+	while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
+		;
 
 	/*  Wait until I2C bus transfer is finished or an error occurs. */
-	while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY) ;
+	while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
+		;
 
 	/*  Return non-zero if I2C error occured. */
 	return RR7146(P_I2CCTRL) & I2C_ERR;
@@ -2579,7 +2585,8 @@ static void SendDAC(comedi_device *dev, uint32_t val)
 	 * Done by polling the DMAC enable flag; this flag is automatically
 	 * cleared when the transfer has finished.
 	 */
-	while ((RR7146(P_MC1) & MC1_A2OUT) != 0) ;
+	while ((RR7146(P_MC1) & MC1_A2OUT) != 0)
+		;
 
 	/* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
 
@@ -2596,7 +2603,8 @@ static void SendDAC(comedi_device *dev, uint32_t val)
 	 * finished transferring the DAC's data DWORD from the output FIFO
 	 * to the output buffer register.
 	 */
-	while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0) ;
+	while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0)
+		;
 
 	/* Set up to trap execution at slot 0 when the TSL sequencer cycles
 	 * back to slot 0 after executing the EOS in slot 5.  Also,
@@ -2632,7 +2640,8 @@ static void SendDAC(comedi_device *dev, uint32_t val)
 		 * from 0xFF to 0x00, which slot 0 causes to happen by shifting
 		 * out/in on SD2 the 0x00 that is always referenced by slot 5.
 		 */
-		 while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0) ;
+		 while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0)
+			;
 	}
 	/* Either (1) we were too late setting the slot 0 trap; the TSL
 	 * sequencer restarted slot 0 before we could set the EOS trap flag,
@@ -2648,7 +2657,8 @@ static void SendDAC(comedi_device *dev, uint32_t val)
 	 * the next DAC write.  This is detected when FB_BUFFER2 MSB changes
 	 * from 0x00 to 0xFF.
 	 */
-	while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0) ;
+	while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0)
+		;
 }
 
 static void WriteMISC2(comedi_device *dev, uint16_t NewImage)
@@ -2687,10 +2697,12 @@ static void DEBItransfer(comedi_device *dev)
 
 	/*  Wait for completion of upload from shadow RAM to DEBI control */
 	/*  register. */
-	while (!MC_TEST(P_MC2, MC2_UPLD_DEBI)) ;
+	while (!MC_TEST(P_MC2, MC2_UPLD_DEBI))
+		;
 
 	/*  Wait until DEBI transfer is done. */
-	while (RR7146(P_PSR) & PSR_DEBI_S) ;
+	while (RR7146(P_PSR) & PSR_DEBI_S)
+		;
 }
 
 /*  Write a value to a gate array register. */

drivers/staging/comedi/proc.c

@@ -55,7 +55,8 @@ int comedi_read_procmem(char *buf, char **start, off_t offset, int len,
 		struct comedi_device_file_info *dev_file_info = comedi_get_device_file_info(i);
 		comedi_device *dev;
 
-		if (dev_file_info == NULL) continue;
+		if (dev_file_info == NULL)
+			continue;
 		dev = dev_file_info->device;
 
 		if (dev->attached) {