[MIPS] Fix potential latency problem due to non-atomic cpu_wait.

If an interrupt happened between checking of NEED_RESCHED and WAIT
instruction, adjust EPC to restart from checking of NEED_RESCHED.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/kernel/cpu-probe.c

@@ -45,18 +45,7 @@ static void r39xx_wait(void)
 	local_irq_enable();
 }
 
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	wait				\n"
-		"	.set	mips0			\n");
-}
+extern void r4k_wait(void);
 
 /*
  * This variant is preferable as it allows testing need_resched and going to
@@ -128,7 +117,7 @@ static int __init wait_disable(char *s)
 
 __setup("nowait", wait_disable);
 
-static inline void check_wait(void)
+void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
@@ -242,7 +231,6 @@ static inline void check_errata(void)
 
 void __init check_bugs32(void)
 {
-	check_wait();
 	check_errata();
 }
 

arch/mips/kernel/genex.S

@@ -20,6 +20,7 @@
 #include <asm/stackframe.h>
 #include <asm/war.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 #define PANIC_PIC(msg)					\
 		.set push;				\
@@ -126,7 +127,42 @@ handle_vcei:
 
 	__FINIT
 
+	.align	5	/* 32 byte rollback region */
+LEAF(r4k_wait)
+	.set	push
+	.set	noreorder
+	/* start of rollback region */
+	LONG_L	t0, TI_FLAGS($28)
+	nop
+	andi	t0, _TIF_NEED_RESCHED
+	bnez	t0, 1f
+	 nop
+	nop
+	nop
+	.set	mips3
+	wait
+	/* end of rollback region (the region size must be power of two) */
+	.set	pop
+1:
+	jr	ra
+	END(r4k_wait)
+
+	.macro	BUILD_ROLLBACK_PROLOGUE handler
+	FEXPORT(rollback_\handler)
+	.set	push
+	.set	noat
+	MFC0	k0, CP0_EPC
+	PTR_LA	k1, r4k_wait
+	ori	k0, 0x1f	/* 32 byte rollback region */
+	xori	k0, 0x1f
+	bne	k0, k1, 9f
+	MTC0	k0, CP0_EPC
+9:
+	.set pop
+	.endm
+
 	.align  5
+BUILD_ROLLBACK_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/*
@@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
  * This prototype is copied to ebase + n*IntCtl.VS and patched
  * to invoke the handler
  */
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME
 	SAVE_AT

arch/mips/kernel/traps.c

@@ -46,6 +46,9 @@
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_tlbm(void);
 extern asmlinkage void handle_tlbl(void);
@@ -1251,6 +1254,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = (cpu_wait == r4k_wait) ?
+			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
 		 * We need to provide the SMTC vectored interrupt handler
@@ -1258,11 +1264,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		 * Status.IM bit to be masked before going there.
 		 */
 		extern char except_vec_vi_mori;
-		const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+		const int mori_offset = &except_vec_vi_mori - vec_start;
 #endif /* CONFIG_MIPS_MT_SMTC */
-		const int handler_len = &except_vec_vi_end - &except_vec_vi;
-		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
-		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+		const int handler_len = &except_vec_vi_end - vec_start;
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;
 
 		if (handler_len > VECTORSPACING) {
 			/*
@@ -1272,7 +1278,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 			panic("VECTORSPACING too small");
 		}
 
-		memcpy(b, &except_vec_vi, handler_len);
+		memcpy(b, vec_start, handler_len);
 #ifdef CONFIG_MIPS_MT_SMTC
 		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */
 
@@ -1554,6 +1560,10 @@ void __init trap_init(void)
 	extern char except_vec3_generic, except_vec3_r4000;
 	extern char except_vec4;
 	unsigned long i;
+	int rollback;
+
+	check_wait();
+	rollback = (cpu_wait == r4k_wait);
 
 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
@@ -1618,7 +1628,7 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, handle_int);
+	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);