Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (22 commits)
  [POWERPC] Fix large hash table allocation on Cell blades
  [POWERPC] Export empty_zero_page
  [POWERPC] Fix viodasd driver with scatterlist debug
  [POWERPC] Fix arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU
  [POWERPC] Fix drivers/macintosh/mediabay.c when !CONFIG_ADB_PMU
  [POWERPC] Fix undefined pmu_sys_suspended compilation error
  [POWERPC] Fix build of modular drivers/macintosh/apm_emu.c
  [POWERPC] Fix sleep on some powerbooks
  [POWERPC] Fix bogus test for unassigned PCI resources
  [POWERPC] Fix zImage-dtb.initrd build error
  [POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels
  [POWERPC] spufs: fix rescheduling of non-runnable contexts
  [POWERPC] spufs: don't (ab)use SCHED_IDLE
  [POWERPC] QE: Make qe_get_firmware_info reentrant
  [POWERPC] 83xx: Make 83xx perfmon support selectable
  [PPC] 8xx: swap bug-fix
  [POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map
  [POWERPC] QE: Fix QE firmware uploading limit
  [POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.
  [POWERPC] 8xx: fix swap
  ...

arch/powerpc/Makefile

@@ -155,7 +155,7 @@ all: zImage
 
 CPPFLAGS_vmlinux.lds	:= -Upowerpc
 
-BOOT_TARGETS = zImage zImage.initrd uImage treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
 
 PHONY += $(BOOT_TARGETS)
 

arch/powerpc/boot/Makefile

@@ -186,7 +186,7 @@ quiet_cmd_wrap	= WRAP    $@
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.pseries
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
-image-$(CONFIG_PPC_PS3)			+= zImage-dtb.ps3
+image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
 image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
@@ -205,7 +205,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 #
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
-image-$(CONFIG_EP405)			+= zImage-dtb.ep405
+image-$(CONFIG_EP405)			+= dtbImage.ep405
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 
 # Board ports in arch/powerpc/platform/44x/Kconfig
@@ -220,9 +220,9 @@ image-$(CONFIG_WARP)			+= cuImage.warp
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_PPC_MPC86XADS)		+= cuImage.mpc866ads
 image-$(CONFIG_PPC_MPC885ADS)		+= cuImage.mpc885ads
-image-$(CONFIG_PPC_EP88XC)		+= zImage-dtb.ep88xc
+image-$(CONFIG_PPC_EP88XC)		+= dtbImage.ep88xc
 image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
-					   zImage-dtb.adder875-redboot
+					   dtbImage.adder875-redboot
 
 # Board ports in arch/powerpc/platform/52xx/Kconfig
 image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 cuImage.lite5200b
@@ -230,7 +230,7 @@ image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 cuImage.lite5200b
 # Board ports in arch/powerpc/platform/82xx/Kconfig
 image-$(CONFIG_MPC8272_ADS)		+= cuImage.mpc8272ads
 image-$(CONFIG_PQ2FADS)			+= cuImage.pq2fads
-image-$(CONFIG_EP8248E)			+= zImage-dtb.ep8248e
+image-$(CONFIG_EP8248E)			+= dtbImage.ep8248e
 
 # Board ports in arch/powerpc/platform/83xx/Kconfig
 image-$(CONFIG_MPC832x_MDS)		+= cuImage.mpc832x_mds
@@ -268,7 +268,8 @@ endif
 
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, \
-		$(patsubst treeImage%, treeImage.initrd%, $(image-y)))
+		$(patsubst dtbImage%, dtbImage.initrd%, \
+		$(patsubst treeImage%, treeImage.initrd%, $(image-y))))
 initrd-y := $(filter-out $(image-y), $(initrd-y))
 targets	+= $(image-y) $(initrd-y)
 
@@ -283,10 +284,11 @@ $(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
 $(obj)/zImage.%: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,$*)
 
-$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
+# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
 	$(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
 
-$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
 	$(call if_changed,wrap,$*,$(dtstree)/$*.dts)
 
 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)

arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -47,6 +47,72 @@
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
 	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +157,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -99,7 +164,8 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi_wide";
+			dr_mode = "host";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {

arch/powerpc/boot/dts/mpc8378_mds.dts

@@ -47,6 +47,72 @@
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
 	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +157,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -99,7 +164,8 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi_wide";
+			dr_mode = "host";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {

arch/powerpc/boot/dts/mpc8379_mds.dts

@@ -47,6 +47,72 @@
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
 	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +157,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -99,7 +164,8 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi_wide";
+			dr_mode = "host";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {

arch/powerpc/boot/dts/sbc8548.dts

@@ -184,11 +184,17 @@
 		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
-			/* IDSEL 0x01 (PCI-X slot) */
-			0x0800 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>;
+			/* IDSEL 0x01 (PCI-X slot) @66MHz */
+			0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <0x18 0x2>;

arch/powerpc/boot/wrapper

@@ -191,10 +191,14 @@ ps3)
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     ;;
-ep88xc|ep405|redboot*|ep8248e)
+ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
     binary=y
     ;;
+adder875-redboot)
+    platformo="$object/fixed-head.o $object/redboot-8xx.o"
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"

arch/powerpc/configs/adder875-redboot_defconfig → arch/powerpc/configs/adder875_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:17:38 2008
+# Linux kernel version: 2.6.25-rc2
+# Wed Feb 20 12:26:07 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -64,17 +65,18 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -87,11 +89,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -99,6 +103,12 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -120,12 +130,14 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -150,6 +162,7 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_I2C_SPI_UCODE_PATCH is not set
 # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -160,7 +173,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
@@ -178,14 +190,19 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -204,11 +221,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="adder875-redboot.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -305,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -411,6 +425,7 @@ CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -445,6 +460,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -469,7 +485,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -574,6 +589,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
 
 #
@@ -614,6 +630,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
@@ -635,11 +652,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -682,8 +697,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -730,7 +747,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -745,9 +761,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -757,7 +770,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -766,6 +779,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -776,14 +790,15 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 

arch/powerpc/kernel/head_8xx.S

@@ -332,8 +332,18 @@ InstructionTLBMiss:
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
 	lwz	r10, 0(r11)	/* Get the pte */
 
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+	stw	r10, 0(r11)
+4:
+#else
 	ori	r10, r10, _PAGE_ACCESSED
 	stw	r10, 0(r11)
+#endif
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 21, 22 and 28 must be clear.
@@ -398,8 +408,17 @@ DataStoreTLBMiss:
 	DO_8xx_CPU6(0x3b80, r3)
 	mtspr	SPRN_MD_TWC, r11
 
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
 	ori	r10, r10, _PAGE_ACCESSED
+4:
+	/* and update pte in table */
+#else
+	ori	r10, r10, _PAGE_ACCESSED
+#endif
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
 	stw	r10, 0(r11)
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
@@ -507,7 +526,16 @@ DataTLBError:
 
 	/* Update 'changed', among others.
 	*/
+#ifdef CONFIG_SWAP
+	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+4:
+#else
 	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
 	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
 	stw	r10, 0(r11)		/* and update pte in table */
 

arch/powerpc/kernel/misc_32.S

@@ -785,6 +785,21 @@ _GLOBAL(__lshrdi3)
 	or	r4,r4,r7	# LSW |= t2
 	blr
 
+/*
+ * 64-bit comparison: __ucmpdi2(u64 a, u64 b)
+ * Returns 0 if a < b, 1 if a == b, 2 if a > b.
+ */
+_GLOBAL(__ucmpdi2)
+	cmplw	r3,r5
+	li	r3,1
+	bne	1f
+	cmplw	r4,r6
+	beqlr
+1:	li	r3,0
+	bltlr
+	li	r3,2
+	blr
+
 _GLOBAL(abs)
 	srawi	r4,r3,31
 	xor	r3,r3,r4

arch/powerpc/kernel/pci-common.c

@@ -748,7 +748,13 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
 		struct resource *res = dev->resource + i;
 		if (!res->flags)
 			continue;
-		if (res->end == 0xffffffff) {
+		/* On platforms that have PPC_PCI_PROBE_ONLY set, we don't
+		 * consider 0 as an unassigned BAR value. It's technically
+		 * a valid value, but linux doesn't like it... so when we can
+		 * re-assign things, we do so, but if we can't, we keep it
+		 * around and hope for the best...
+		 */
+		if (res->start == 0 && !(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
 			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
 				 pci_name(dev), i,
 				 (unsigned long long)res->start,

arch/powerpc/kernel/ppc_ksyms.c

@@ -58,6 +58,7 @@ extern void program_check_exception(struct pt_regs *regs);
 extern void single_step_exception(struct pt_regs *regs);
 extern int sys_sigreturn(struct pt_regs *regs);
 
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
@@ -149,6 +150,8 @@ long long __lshrdi3(long long, int);
 EXPORT_SYMBOL(__ashrdi3);
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__lshrdi3);
+int __ucmpdi2(unsigned long long, unsigned long long);
+EXPORT_SYMBOL(__ucmpdi2);
 #endif
 
 EXPORT_SYMBOL(memcpy);

arch/powerpc/mm/hash_utils_64.c

@@ -506,10 +506,10 @@ void __init htab_initialize(void)
 	} else {
 		/* Find storage for the HPT.  Must be contiguous in
 		 * the absolute address space. On cell we want it to be
-		 * in the first 1 Gig.
+		 * in the first 2 Gig so we can use it for IOMMU hacks.
 		 */
 		if (machine_is(cell))
-			limit = 0x40000000;
+			limit = 0x80000000;
 		else
 			limit = 0;
 

arch/powerpc/platforms/83xx/mpc837x_mds.c

@@ -39,12 +39,9 @@ static int mpc837xmds_usb_cfg(void)
 	if (ret)
 		return ret;
 	/* Map BCSR area */
-	np = of_find_node_by_name(NULL, "bcsr");
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
 	if (np) {
-		struct resource res;
-
-		of_address_to_resource(np, 0, &res);
-		bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+		bcsr_regs = of_iomap(np, 0);
 		of_node_put(np);
 	}
 	if (!bcsr_regs)
@@ -96,6 +93,7 @@ static void __init mpc837x_mds_setup_arch(void)
 static struct of_device_id mpc837x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 

arch/powerpc/platforms/Kconfig

@@ -22,7 +22,6 @@ config PPC_83xx
 	select FSL_SOC
 	select MPC83xx
 	select IPIC
-	select FSL_EMB_PERFMON
 
 config PPC_86xx
 	bool "Freescale 86xx"

arch/powerpc/platforms/Kconfig.cputype

@@ -113,7 +113,12 @@ config FSL_BOOKE
 	default y
 
 config FSL_EMB_PERFMON
-	bool
+	bool "Freescale Embedded Perfmon"
+	depends on E500 || PPC_83xx
+	help
+	  This is the Performance Monitor support found on the e500 core
+	  and some e300 cores (c3 and c4).  Select this only if your
+	  core supports the Embedded Performance Monitor APU
 
 config PTE_64BIT
 	bool

arch/powerpc/platforms/cell/spufs/context.c

@@ -170,7 +170,8 @@ void spu_release_saved(struct spu_context *ctx)
 {
 	BUG_ON(ctx->state != SPU_STATE_SAVED);
 
-	if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags))
+	if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags) &&
+			test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 		spu_activate(ctx, 0);
 
 	spu_release(ctx);

arch/powerpc/platforms/cell/spufs/run.c

@@ -220,6 +220,7 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 		}
 	}
 
+	set_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
 	return 0;
 }
 
@@ -234,7 +235,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc,
 	*npc = ctx->ops->npc_read(ctx);
 
 	spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
-	ctx->policy = SCHED_IDLE;
+	clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
 	spu_release(ctx);
 
 	if (signal_pending(current))

arch/powerpc/platforms/cell/spufs/sched.c

@@ -867,7 +867,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 	if (ctx->policy == SCHED_FIFO)
 		goto out;
 
-	if (--ctx->time_slice && ctx->policy != SCHED_IDLE)
+	if (--ctx->time_slice && test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 		goto out;
 
 	spu = ctx->spu;
@@ -877,7 +877,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
 		spu_unschedule(spu, ctx);
-		if (ctx->policy != SCHED_IDLE)
+		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {
 		spu_context_nospu_trace(spusched_tick__newslice, ctx);

arch/powerpc/platforms/cell/spufs/spufs.h

@@ -44,6 +44,7 @@ struct spu_gang;
 enum {
 	SPU_SCHED_NOTIFY_ACTIVE,
 	SPU_SCHED_WAS_ACTIVE,	/* was active upon spu_acquire_saved()  */
+	SPU_SCHED_SPU_RUN,	/* context is within spu_run */
 };
 
 struct spu_context {

arch/powerpc/platforms/powermac/pic.c

@@ -618,9 +618,9 @@ static int pmacpic_find_viaint(void)
 	if (np == NULL)
 		goto not_found;
 	viaint = irq_of_parse_and_map(np, 0);;
-#endif /* CONFIG_ADB_PMU */
 
 not_found:
+#endif /* CONFIG_ADB_PMU */
 	return viaint;
 }
 

arch/powerpc/sysdev/qe_lib/qe.c

@@ -509,7 +509,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 	}
 
 	/* Validate some of the fields */
-	if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
+	if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
 		printk(KERN_ERR "qe-firmware: invalid data\n");
 		return -EINVAL;
 	}
@@ -609,7 +609,10 @@ struct qe_firmware_info *qe_get_firmware_info(void)
 	 * If we haven't checked yet, and a driver hasn't uploaded a firmware
 	 * yet, then check the device tree for information.
 	 */
-	if (initialized || qe_firmware_uploaded)
+	if (qe_firmware_uploaded)
+		return &qe_firmware_info;
+
+	if (initialized)
 		return NULL;
 
 	initialized = 1;

arch/ppc/kernel/head_8xx.S

@@ -329,8 +329,18 @@ InstructionTLBMiss:
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
 	lwz	r10, 0(r11)	/* Get the pte */
 
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+	stw	r10, 0(r11)
+4:
+#else
 	ori	r10, r10, _PAGE_ACCESSED
 	stw	r10, 0(r11)
+#endif
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 21, 22 and 28 must be clear.
@@ -395,8 +405,17 @@ DataStoreTLBMiss:
 	DO_8xx_CPU6(0x3b80, r3)
 	mtspr	SPRN_MD_TWC, r11
 
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+4:
+	/* and update pte in table */
+#else
 	ori	r10, r10, _PAGE_ACCESSED
+#endif
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
 	stw	r10, 0(r11)
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
@@ -575,7 +594,16 @@ DataTLBError:
 
 	/* Update 'changed', among others.
 	*/
+#ifdef CONFIG_SWAP
+	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+4:
+#else
 	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
 	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
 	stw	r10, 0(r11)		/* and update pte in table */
 

drivers/block/viodasd.c

@@ -528,8 +528,7 @@ static int block_event_to_scatterlist(const struct vioblocklpevent *bevent,
 		numsg = VIOMAXBLOCKDMA;
 
 	*total_len = 0;
-	memset(sg, 0, sizeof(sg[0]) * VIOMAXBLOCKDMA);
-
+	sg_init_table(sg, VIOMAXBLOCKDMA);
 	for (i = 0; (i < numsg) && (rw_data->dma_info[i].len > 0); ++i) {
 		sg_dma_address(&sg[i]) = rw_data->dma_info[i].token;
 		sg_dma_len(&sg[i]) = rw_data->dma_info[i].len;

drivers/macintosh/via-pmu-backlight.c

@@ -17,7 +17,7 @@
 
 static struct backlight_ops pmu_backlight_data;
 static DEFINE_SPINLOCK(pmu_backlight_lock);
-static int sleeping;
+static int sleeping, uses_pmu_bl;
 static u8 bl_curve[FB_BACKLIGHT_LEVELS];
 
 static void pmu_backlight_init_curve(u8 off, u8 min, u8 max)
@@ -128,7 +128,7 @@ void pmu_backlight_set_sleep(int sleep)
 
 	spin_lock_irqsave(&pmu_backlight_lock, flags);
 	sleeping = sleep;
-	if (pmac_backlight) {
+	if (pmac_backlight && uses_pmu_bl) {
 		if (sleep) {
 			struct adb_request req;
 
@@ -166,6 +166,7 @@ void __init pmu_backlight_init()
 		printk(KERN_ERR "PMU Backlight registration failed\n");
 		return;
 	}
+	uses_pmu_bl = 1;
 	bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
 	pmu_backlight_init_curve(0x7F, 0x46, 0x0E);
 

drivers/macintosh/via-pmu.c

@@ -2528,7 +2528,7 @@ EXPORT_SYMBOL(pmu_wait_complete);
 EXPORT_SYMBOL(pmu_suspend);
 EXPORT_SYMBOL(pmu_resume);
 EXPORT_SYMBOL(pmu_unlock);
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
+#if defined(CONFIG_PPC32)
 EXPORT_SYMBOL(pmu_enable_irled);
 EXPORT_SYMBOL(pmu_battery_count);
 EXPORT_SYMBOL(pmu_batteries);

include/asm-powerpc/pgtable-ppc32.h

@@ -339,14 +339,6 @@ extern int icache_44x_need_flush;
 #define _PMD_PAGE_MASK	0x000c
 #define _PMD_PAGE_8M	0x000c
 
-/*
- * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
- * for an address even if _PAGE_PRESENT is not set, as a performance
- * optimization.  This is a bug if you ever want to use swap unless
- * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
- * definitions for __swp_entry etc. below, which would be gross.
- *  -- paulus
- */
 #define _PTE_NONE_MASK _PAGE_ACCESSED
 
 #else /* CONFIG_6xx */

include/asm-ppc/pgtable.h

@@ -299,14 +299,6 @@ extern unsigned long ioremap_bot, ioremap_base;
 #define _PMD_PAGE_MASK	0x000c
 #define _PMD_PAGE_8M	0x000c
 
-/*
- * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
- * for an address even if _PAGE_PRESENT is not set, as a performance
- * optimization.  This is a bug if you ever want to use swap unless
- * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
- * definitions for __swp_entry etc. below, which would be gross.
- *  -- paulus
- */
 #define _PTE_NONE_MASK _PAGE_ACCESSED
 
 #else /* CONFIG_6xx */

include/linux/pmu.h

@@ -147,8 +147,15 @@ extern void pmu_wait_complete(struct adb_request *req);
 /* For use before switching interrupts off for a long time;
  * warning: not stackable
  */
+#if defined(CONFIG_ADB_PMU)
 extern void pmu_suspend(void);
 extern void pmu_resume(void);
+#else
+static inline void pmu_suspend(void)
+{}
+static inline void pmu_resume(void)
+{}
+#endif
 
 extern void pmu_enable_irled(int on);
 
@@ -192,7 +199,7 @@ extern unsigned int pmu_power_flags;
 extern void pmu_backlight_init(void);
 
 /* some code needs to know if the PMU was suspended for hibernation */
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 extern int pmu_sys_suspended;
 #else
 /* if power management is not configured it can't be suspended */