Commit c155f3f9 authored by Jiri Olsa's avatar Jiri Olsa Committed by Linus Torvalds

m68knomu: remove dead config symbols from m68knomu code

remove dead config symbols from m68knommu code
Signed-off-by: default avatarJiri Olsa <olsajiri@gmail.com>
Acked-by: default avatarGreg Ungerer <gerg@snapgear.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 16791963
......@@ -64,9 +64,6 @@ void (*mach_power_off)(void);
#ifdef CONFIG_M68VZ328
#define CPU "MC68VZ328"
#endif
#ifdef CONFIG_M68332
#define CPU "MC68332"
#endif
#ifdef CONFIG_M68360
#define CPU "MC68360"
#endif
......
......@@ -60,17 +60,6 @@
#define NE2000_BYTE volatile unsigned char
#endif
#if defined(CONFIG_CFV240)
#define NE2000_ADDR 0x40010000
#define NE2000_ADDR1 0x40010001
#define NE2000_ODDOFFSET 0x00000000
#define NE2000_IRQ 1
#define NE2000_IRQ_VECTOR 0x19
#define NE2000_IRQ_PRIORITY 2
#define NE2000_IRQ_LEVEL 1
#define NE2000_BYTE volatile unsigned char
#endif
#if defined(CONFIG_M5307C3)
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
......@@ -173,13 +162,8 @@ void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
* On most NE2000 implementations on ColdFire boards the chip is
* mapped in kinda funny, due to its ISA heritage.
*/
#ifdef CONFIG_CFV240
#define NE2000_PTR(addr) (NE2000_ADDR + ((addr & 0x3f) << 1) + 1)
#define NE2000_DATA_PTR(addr) (NE2000_ADDR + ((addr & 0x3f) << 1))
#else
#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
#define NE2000_DATA_PTR(addr) (addr)
#endif
void ne2000_outb(unsigned int val, unsigned int addr)
......@@ -285,17 +269,6 @@ void ne2000_irqsetup(int irq)
}
#endif
#if defined(CONFIG_CFV240)
void ne2000_irqsetup(int irq)
{
volatile unsigned char *icrp;
icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR1);
*icrp = MCFSIM_ICR_LEVEL1 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT1);
}
#endif
#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
void ne2000_irqsetup(int irq)
{
......
......@@ -17,9 +17,7 @@
* Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
* 5307 or 5407 specific addresses.
*/
#if defined(CONFIG_M5204)
#include <asm/m5204sim.h>
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#include <asm/m5206sim.h>
#elif defined(CONFIG_M520x)
#include <asm/m520xsim.h>
......
......@@ -16,7 +16,7 @@
/*
* Get address specific defines for this ColdFire member.
*/
#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
#elif defined(CONFIG_M5272)
......
......@@ -19,7 +19,7 @@
#if defined(CONFIG_M5272)
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
......
......@@ -207,23 +207,6 @@ cmpxchg(volatile int *p, int old, int new)
}
#ifdef CONFIG_M68332
#define HARD_RESET_NOW() ({ \
local_irq_disable(); \
asm(" \
movew #0x0000, 0xfffa6a; \
reset; \
/*movew #0x1557, 0xfffa44;*/ \
/*movew #0x0155, 0xfffa46;*/ \
moveal #0, %a0; \
movec %a0, %vbr; \
moveal 0, %sp; \
moveal 4, %a0; \
jmp (%a0); \
"); \
})
#endif
#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
#define HARD_RESET_NOW() ({ \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment