Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/configs/bast_defconfig

@@ -14,8 +14,7 @@ CONFIG_GENERIC_IOMAP=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 
 #
@@ -360,7 +359,6 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
@@ -781,7 +779,6 @@ CONFIG_SYSFS=y
 # CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 

arch/arm/configs/collie_defconfig

@@ -13,8 +13,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -308,9 +307,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_OBSOLETE_CHIPS=y
-# CONFIG_MTD_AMDSTD is not set
 CONFIG_MTD_SHARP=y
-# CONFIG_MTD_JEDEC is not set
 
 #
 # Mapping drivers for chip access
@@ -396,7 +393,6 @@ CONFIG_ATA_OVER_ETH=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
@@ -741,7 +737,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set

arch/arm/configs/s3c2410_defconfig

@@ -13,8 +13,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -473,7 +472,6 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
@@ -896,7 +894,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set

arch/arm/kernel/entry-common.S

@@ -87,7 +87,11 @@ ENTRY(ret_from_fork)
 	b	ret_slow_syscall
 	
 
+	.equ NR_syscalls,0
+#define CALL(x) .equ NR_syscalls,NR_syscalls+1
 #include "calls.S"
+#undef CALL
+#define CALL(x) .long x
 
 /*=============================================================================
  * SWI handler

arch/arm/mach-integrator/integrator_cp.c

@@ -469,7 +469,9 @@ static void cp_clcd_enable(struct clcd_fb *fb)
 	if (fb->fb.var.bits_per_pixel <= 8)
 		val = CM_CTRL_LCDMUXSEL_VGA_8421BPP;
 	else if (fb->fb.var.bits_per_pixel <= 16)
-		val = CM_CTRL_LCDMUXSEL_VGA_16BPP;
+		val = CM_CTRL_LCDMUXSEL_VGA_16BPP
+			| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1
+			| CM_CTRL_STATIC1 | CM_CTRL_STATIC2;
 	else
 		val = 0; /* no idea for this, don't trust the docs */
 

arch/arm/mach-s3c2410/cpu.h

@@ -17,11 +17,12 @@
  *     14-Jan-2005 BJD  Added s3c24xx_init_clocks() call
  *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
  *     14-Mar-2005 BJD  Updated for __iomem
+ *     15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
 */
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
 #define MHZ (1000*1000)

arch/arm/mach-s3c2410/devs.c

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  *
  * Modifications:
+ *     15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
  *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
  *     10-Feb-2005 BJD  Added camera from guillaume.gourat@nexvision.tv
  *     29-Aug-2004 BJD  Added timers 0 through 3
@@ -46,8 +47,8 @@ struct platform_device *s3c24xx_uart_devs[3];
 
 static struct resource s3c_usb_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_USBHOST,
-		.end   = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+		.start = S3C24XX_PA_USBHOST,
+		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -76,8 +77,8 @@ EXPORT_SYMBOL(s3c_device_usb);
 
 static struct resource s3c_lcd_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_LCD,
-		.end   = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
+		.start = S3C24XX_PA_LCD,
+		.end   = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -139,8 +140,8 @@ EXPORT_SYMBOL(s3c_device_nand);
 
 static struct resource s3c_usbgadget_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_USBDEV,
-		.end   = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
+		.start = S3C24XX_PA_USBDEV,
+		.end   = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -164,8 +165,8 @@ EXPORT_SYMBOL(s3c_device_usbgadget);
 
 static struct resource s3c_wdt_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_WATCHDOG,
-		.end   = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
+		.start = S3C24XX_PA_WATCHDOG,
+		.end   = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -189,8 +190,8 @@ EXPORT_SYMBOL(s3c_device_wdt);
 
 static struct resource s3c_i2c_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_IIC,
-		.end   = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
+		.start = S3C24XX_PA_IIC,
+		.end   = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -214,8 +215,8 @@ EXPORT_SYMBOL(s3c_device_i2c);
 
 static struct resource s3c_iis_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_IIS,
-		.end   = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
+		.start = S3C24XX_PA_IIS,
+		.end   = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
 		.flags = IORESOURCE_MEM,
 	}
 };
@@ -239,8 +240,8 @@ EXPORT_SYMBOL(s3c_device_iis);
 
 static struct resource s3c_rtc_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_RTC,
-		.end   = S3C2410_PA_RTC + 0xff,
+		.start = S3C24XX_PA_RTC,
+		.end   = S3C24XX_PA_RTC + 0xff,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -268,8 +269,8 @@ EXPORT_SYMBOL(s3c_device_rtc);
 
 static struct resource s3c_adc_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_ADC,
-		.end   = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
+		.start = S3C24XX_PA_ADC,
+		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -316,8 +317,8 @@ EXPORT_SYMBOL(s3c_device_sdi);
 
 static struct resource s3c_spi0_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_SPI,
-		.end   = S3C2410_PA_SPI + 0x1f,
+		.start = S3C24XX_PA_SPI,
+		.end   = S3C24XX_PA_SPI + 0x1f,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -341,8 +342,8 @@ EXPORT_SYMBOL(s3c_device_spi0);
 
 static struct resource s3c_spi1_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_SPI + 0x20,
-		.end   = S3C2410_PA_SPI + 0x20 + 0x1f,
+		.start = S3C24XX_PA_SPI + 0x20,
+		.end   = S3C24XX_PA_SPI + 0x20 + 0x1f,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -366,8 +367,8 @@ EXPORT_SYMBOL(s3c_device_spi1);
 
 static struct resource s3c_timer0_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_TIMER + 0x0C,
-		.end   = S3C2410_PA_TIMER + 0x0C + 0xB,
+		.start = S3C24XX_PA_TIMER + 0x0C,
+		.end   = S3C24XX_PA_TIMER + 0x0C + 0xB,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -391,8 +392,8 @@ EXPORT_SYMBOL(s3c_device_timer0);
 
 static struct resource s3c_timer1_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_TIMER + 0x18,
-		.end   = S3C2410_PA_TIMER + 0x23,
+		.start = S3C24XX_PA_TIMER + 0x18,
+		.end   = S3C24XX_PA_TIMER + 0x23,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -416,8 +417,8 @@ EXPORT_SYMBOL(s3c_device_timer1);
 
 static struct resource s3c_timer2_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_TIMER + 0x24,
-		.end   = S3C2410_PA_TIMER + 0x2F,
+		.start = S3C24XX_PA_TIMER + 0x24,
+		.end   = S3C24XX_PA_TIMER + 0x2F,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -441,8 +442,8 @@ EXPORT_SYMBOL(s3c_device_timer2);
 
 static struct resource s3c_timer3_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_TIMER + 0x30,
-		.end   = S3C2410_PA_TIMER + 0x3B,
+		.start = S3C24XX_PA_TIMER + 0x30,
+		.end   = S3C24XX_PA_TIMER + 0x3B,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {

arch/arm/mach-s3c2410/dma.c

@@ -1152,7 +1152,7 @@ static int __init s3c2410_init_dma(void)
 
 	printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n");
 
-	dma_base = ioremap(S3C2410_PA_DMA, 0x200);
+	dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
 	if (dma_base == NULL) {
 		printk(KERN_ERR "dma failed to remap register block\n");
 		return -ENOMEM;

arch/arm/mach-s3c2410/sleep.S

@@ -133,12 +133,12 @@ ENTRY(s3c2410_cpu_resume)
 	@@ load UART to allow us to print the two characters for
 	@@ resume debug
 
-	mov	r2, #S3C2410_PA_UART & 0xff000000
-	orr	r2, r2, #S3C2410_PA_UART & 0xff000
+	mov	r2, #S3C24XX_PA_UART & 0xff000000
+	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
 
 #if 0
 	/* SMDK2440 LED set */
-	mov	r14, #S3C2410_PA_GPIO
+	mov	r14, #S3C24XX_PA_GPIO
 	ldr	r12, [ r14, #0x54 ]
 	bic	r12, r12, #3<<4
 	orr	r12, r12, #1<<7

arch/arm/mm/ioremap.c

@@ -142,7 +142,7 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
  		return NULL;
  	addr = (unsigned long)area->addr;
  	if (remap_area_pages(addr, pfn, size, flags)) {
- 		vfree(addr);
+ 		vfree((void *)addr);
  		return NULL;
  	}
  	return (void __iomem *) (offset + (char *)addr);

arch/arm/mm/mm-armv.c

@@ -343,6 +343,12 @@ static struct mem_types mem_types[] __initdata = {
 				PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
 				PMD_SECT_TEX(1),
 		.domain    = DOMAIN_IO,
+	},
+	[MT_NONSHARED_DEVICE] = {
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV |
+				PMD_SECT_AP_WRITE,
+		.domain    = DOMAIN_IO,
 	}
 };
 

drivers/input/touchscreen/ads7846.c

@@ -29,9 +29,6 @@
 #ifdef	CONFIG_ARCH_OMAP
 #include <asm/arch/gpio.h>
 #endif
-
-#else
-#define	set_irq_type(irq,type)	do{}while(0)
 #endif
 
 
@@ -509,14 +506,14 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->msg.complete = ads7846_rx;
 	ts->msg.context = ts;
 
-	if (request_irq(spi->irq, ads7846_irq, SA_SAMPLE_RANDOM,
-				spi->dev.bus_id, ts)) {
+	if (request_irq(spi->irq, ads7846_irq,
+			SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
+			spi->dev.bus_id, ts)) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		input_unregister_device(&ts->input);
 		kfree(ts);
 		return -EBUSY;
 	}
-	set_irq_type(spi->irq, IRQT_FALLING);
 
 	dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
 

drivers/serial/imx.c

@@ -402,10 +402,10 @@ static int imx_startup(struct uart_port *port)
 			     DRIVER_NAME, sport);
 	if (retval) goto error_out2;
 
-	retval = request_irq(sport->rtsirq, imx_rtsint, 0,
+	retval = request_irq(sport->rtsirq, imx_rtsint,
+			     SA_TRIGGER_FALLING | SA_TRIGGER_RISING,
 			     DRIVER_NAME, sport);
 	if (retval) goto error_out3;
-	set_irq_type(sport->rtsirq, IRQT_BOTHEDGE);
 
 	/*
 	 * Finally, clear and enable interrupts

drivers/serial/s3c2410.c

@@ -1060,7 +1060,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
 	port->mapbase	= res->start;
-	port->membase	= S3C24XX_VA_UART + (res->start - S3C2410_PA_UART);
+	port->membase	= S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
 	port->irq	= platform_get_irq(platdev, 0);
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");

drivers/video/amba-clcd.c

@@ -116,9 +116,10 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
 	int ret = 0;
 
 	memset(&var->transp, 0, sizeof(var->transp));
-	memset(&var->red, 0, sizeof(var->red));
-	memset(&var->green, 0, sizeof(var->green));
-	memset(&var->blue, 0, sizeof(var->blue));
+
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
 
 	switch (var->bits_per_pixel) {
 	case 1:
@@ -133,34 +134,20 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
 		var->blue.offset	= 0;
 		break;
 	case 16:
-		var->red.length		= 5;
-		var->green.length	= 6;
-		var->blue.length	= 5;
-		if (fb->panel->cntl & CNTL_BGR) {
-			var->red.offset		= 11;
-			var->green.offset	= 5;
-			var->blue.offset	= 0;
-		} else {
-			var->red.offset		= 0;
-			var->green.offset	= 5;
-			var->blue.offset	= 11;
-		}
+		var->red.length = 5;
+		var->blue.length = 5;
+		/*
+		 * Green length can be 5 or 6 depending whether
+		 * we're operating in RGB555 or RGB565 mode.
+		 */
+		if (var->green.length != 5 && var->green.length != 6)
+			var->green.length = 6;
 		break;
 	case 32:
 		if (fb->panel->cntl & CNTL_LCDTFT) {
 			var->red.length		= 8;
 			var->green.length	= 8;
 			var->blue.length	= 8;
-
-			if (fb->panel->cntl & CNTL_BGR) {
-				var->red.offset		= 16;
-				var->green.offset	= 8;
-				var->blue.offset	= 0;
-			} else {
-				var->red.offset		= 0;
-				var->green.offset	= 8;
-				var->blue.offset	= 16;
-			}
 			break;
 		}
 	default:
@@ -168,6 +155,23 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
 		break;
 	}
 
+	/*
+	 * >= 16bpp displays have separate colour component bitfields
+	 * encoded in the pixel data.  Calculate their position from
+	 * the bitfield length defined above.
+	 */
+	if (ret == 0 && var->bits_per_pixel >= 16) {
+		if (fb->panel->cntl & CNTL_BGR) {
+			var->blue.offset = 0;
+			var->green.offset = var->blue.offset + var->blue.length;
+			var->red.offset = var->green.offset + var->green.length;
+		} else {
+			var->red.offset = 0;
+			var->green.offset = var->red.offset + var->red.length;
+			var->blue.offset = var->green.offset + var->green.length;
+		}
+	}
+
 	return ret;
 }
 

include/asm-arm/arch-s3c2410/debug-macro.S

@@ -25,7 +25,7 @@
 		.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
-		ldreq	\rx, = S3C2410_PA_UART
+		ldreq	\rx, = S3C24XX_PA_UART
 		ldrne	\rx, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C2410_UART != 0
 		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
@@ -44,7 +44,7 @@
 1003:
 		mrc	p15, 0, \rd, c1, c0
 		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
 		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
@@ -75,7 +75,7 @@
 1003:
 		mrc	p15, 0, \rd, c1, c0
 		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
 		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]

include/asm-arm/arch-s3c2410/map.h

@@ -14,6 +14,7 @@
  *  06-Jan-2003 BJD   Linux 2.6.0 version, moved bast specifics out
  *  10-Feb-2005 BJD   Added CAMIF definition from guillaume.gourat@nexvision.tv
  *  10-Mar-2005 LCVR  Added support to S3C2400, changed {VA,SZ} names
+ *  15-Jan-2006 LCVR  Added S3C24XX_PA macros for common S3C24XX resources
 */
 
 #ifndef __ASM_ARCH_MAP_H
@@ -188,5 +189,42 @@
 
 #define S3C2400_SDRAM_PA    (S3C2400_CS6)
 
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_PA_IRQ      S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST  S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA      S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2400_PA_LCD
+#define S3C24XX_PA_UART     S3C2400_PA_UART
+#define S3C24XX_PA_TIMER    S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC      S3C2400_PA_IIC
+#define S3C24XX_PA_IIS      S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO     S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC      S3C2400_PA_RTC
+#define S3C24XX_PA_ADC      S3C2400_PA_ADC
+#define S3C24XX_PA_SPI      S3C2400_PA_SPI
+#else
+#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA      S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2410_PA_LCD
+#define S3C24XX_PA_UART     S3C2410_PA_UART
+#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC      S3C2410_PA_IIC
+#define S3C24XX_PA_IIS      S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC      S3C2410_PA_RTC
+#define S3C24XX_PA_ADC      S3C2410_PA_ADC
+#define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#endif
 
 #endif /* __ASM_ARCH_MAP_H */

include/asm-arm/arch-s3c2410/regs-serial.h

@@ -39,9 +39,9 @@
 #define S3C24XX_VA_UART1      (S3C24XX_VA_UART + 0x4000 )
 #define S3C24XX_VA_UART2      (S3C24XX_VA_UART + 0x8000 )
 
-#define S3C2410_PA_UART0      (S3C2410_PA_UART)
-#define S3C2410_PA_UART1      (S3C2410_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C2410_PA_UART + 0x8000 )
+#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
 
 #define S3C2410_URXH	  (0x24)
 #define S3C2410_UTXH	  (0x20)

include/asm-arm/arch-s3c2410/uncompress.h

@@ -35,13 +35,13 @@
 #undef S3C2410_GPIOREG
 #undef S3C2410_WDOGREG
 
-#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
-#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
 
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
-#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)

include/asm-arm/mach/map.h

@@ -26,6 +26,7 @@ struct meminfo;
 #define MT_MEMORY		5
 #define MT_ROM			6
 #define MT_IXP2000_DEVICE	7
+#define MT_NONSHARED_DEVICE	8
 
 extern void create_memmap_holes(struct meminfo *);
 extern void memtable_init(struct meminfo *);

include/asm-arm/pgtable.h

@@ -168,6 +168,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
 #define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
 
 /*
  *   - coarse table (not used)