Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (21 commits)
  [MTD] [CHIPS] Remove MTD_OBSOLETE_CHIPS (jedec, amd_flash, sharp)
  [MTD] Delete allegedly obsolete "bank_size" field of mtd_info.
  [MTD] Remove unnecessary user space check from mtd.h.
  [MTD] [MAPS] Remove flash maps for no longer supported 405LP boards
  [MTD] [MAPS] Fix missing printk() parameter in physmap_of.c MTD driver
  [MTD] [NAND] platform NAND driver: add driver
  [MTD] [NAND] platform NAND driver: update header
  [JFFS2] Simplify and clean up jffs2_add_tn_to_tree() some more.
  [JFFS2] Remove another bogus optimisation in jffs2_add_tn_to_tree()
  [JFFS2] Remove broken insert_point optimisation in jffs2_add_tn_to_tree()
  [JFFS2] Remember to calculate overlap on nodes which replace older nodes
  [JFFS2] Don't advance c->wbuf_ofs to next eraseblock after wbuf flush
  [MTD] [NAND] at91_nand.c: CMDLINE_PARTS support
  [MTD] [NAND] Tidy up handling of page number in nand_block_bad()
  [MTD] block2mtd_paramline[] mustn't be __initdata
  [MTD] [NAND] Support multiple chips in CAFÉ driver
  [MTD] [NAND] Rename cafe.c to cafe_nand.c and remove the multi-obj magic
  [MTD] [NAND] Use rslib for CAFÉ ECC
  [RSLIB] Support non-canonical GF representations
  [JFFS2] Remove dead file histo_mips.h
  ...

MAINTAINERS

@@ -2648,6 +2648,12 @@ M:	corbet@lwn.net
 L:	video4linux-list@redhat.com
 S:	Maintained
 
+ONENAND FLASH DRIVER
+P:	Kyungmin Park
+M:	kyungmin.park@samsung.com
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+
 ONSTREAM SCSI TAPE DRIVER
 P:	Willem Riede
 M:	osst@riede.org

drivers/mtd/chips/Kconfig

 # drivers/mtd/chips/Kconfig
-# $Id: Kconfig,v 1.18 2005/11/07 11:14:22 gleixner Exp $
 
 menu "RAM/ROM/Flash chip drivers"
 	depends on MTD!=n
@@ -231,45 +230,6 @@ config MTD_ABSENT
 	  the system regardless of media presence.  Device nodes created
 	  with this driver will return -ENODEV upon access.
 
-config MTD_OBSOLETE_CHIPS
-	bool "Older (theoretically obsoleted now) drivers for non-CFI chips"
-	help
-	  This option does not enable any code directly, but will allow you to
-	  select some other chip drivers which are now considered obsolete,
-	  because the generic CONFIG_JEDECPROBE code above should now detect
-	  the chips which are supported by these drivers, and allow the generic
-	  CFI-compatible drivers to drive the chips. Say 'N' here unless you have
-	  already tried the CONFIG_JEDECPROBE method and reported its failure
-	  to the MTD mailing list at <linux-mtd@lists.infradead.org>
-
-config MTD_AMDSTD
-	tristate "AMD compatible flash chip support (non-CFI)"
-	depends on MTD_OBSOLETE_CHIPS && BROKEN
-	help
-	  This option enables support for flash chips using AMD-compatible
-	  commands, including some which are not CFI-compatible and hence
-	  cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
-
-	  It also works on AMD compatible chips that do conform to CFI.
-
-config MTD_SHARP
-	tristate "pre-CFI Sharp chip support"
-	depends on MTD_OBSOLETE_CHIPS
-	help
-	  This option enables support for flash chips using Sharp-compatible
-	  commands, including some which are not CFI-compatible and hence
-	  cannot be used with the CONFIG_MTD_CFI_INTELxxx options.
-
-config MTD_JEDEC
-	tristate "JEDEC device support"
-	depends on MTD_OBSOLETE_CHIPS && BROKEN
-	help
-	  Enable older JEDEC flash interface devices for self
-	  programming flash.  It is commonly used in older AMD chips.  It is
-	  only called JEDEC because the JEDEC association
-	  <http://www.jedec.org/> distributes the identification codes for the
-	  chips.
-
 config MTD_XIP
 	bool "XIP aware MTD support"
 	depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARCH_MTD_XIP

drivers/mtd/chips/Makefile

 #
 # linux/drivers/chips/Makefile
 #
-# $Id: Makefile.common,v 1.5 2005/11/07 11:14:22 gleixner Exp $
 
 obj-$(CONFIG_MTD)		+= chipreg.o
-obj-$(CONFIG_MTD_AMDSTD)	+= amd_flash.o
 obj-$(CONFIG_MTD_CFI)		+= cfi_probe.o
 obj-$(CONFIG_MTD_CFI_UTIL)	+= cfi_util.o
 obj-$(CONFIG_MTD_CFI_STAA)	+= cfi_cmdset_0020.o
 obj-$(CONFIG_MTD_CFI_AMDSTD)	+= cfi_cmdset_0002.o
 obj-$(CONFIG_MTD_CFI_INTELEXT)	+= cfi_cmdset_0001.o
 obj-$(CONFIG_MTD_GEN_PROBE)	+= gen_probe.o
-obj-$(CONFIG_MTD_JEDEC)		+= jedec.o
 obj-$(CONFIG_MTD_JEDECPROBE)	+= jedec_probe.o
 obj-$(CONFIG_MTD_RAM)		+= map_ram.o
 obj-$(CONFIG_MTD_ROM)		+= map_rom.o
-obj-$(CONFIG_MTD_SHARP)		+= sharp.o
 obj-$(CONFIG_MTD_ABSENT)	+= map_absent.o

drivers/mtd/devices/block2mtd.c

@@ -373,7 +373,7 @@ static inline void kill_final_newline(char *str)
 
 #ifndef MODULE
 static int block2mtd_init_called = 0;
-static __initdata char block2mtd_paramline[80 + 12]; /* 80 for device, 12 for erase size */
+static char block2mtd_paramline[80 + 12]; /* 80 for device, 12 for erase size */
 #endif
 
 

drivers/mtd/maps/Kconfig

@@ -358,22 +358,6 @@ config MTD_CFI_FLAGADM
 	  Mapping for the Flaga digital module. If you don't have one, ignore
 	  this setting.
 
-config MTD_BEECH
-	tristate "CFI Flash device mapped on IBM 405LP Beech"
-	depends on MTD_CFI && BEECH
-	help
-	  This enables access routines for the flash chips on the IBM
-	  405LP Beech board. If you have one of these boards and would like
-	  to use the flash chips on it, say 'Y'.
-
-config MTD_ARCTIC
-	tristate "CFI Flash device mapped on IBM 405LP Arctic"
-	depends on MTD_CFI && ARCTIC2
-	help
-	  This enables access routines for the flash chips on the IBM 405LP
-	  Arctic board. If you have one of these boards and would like to
-	  use the flash chips on it, say 'Y'.
-
 config MTD_WALNUT
 	tristate "Flash device mapped on IBM 405GP Walnut"
 	depends on MTD_JEDECPROBE && WALNUT

drivers/mtd/maps/Makefile

@@ -58,8 +58,6 @@ obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
 obj-$(CONFIG_MTD_EBONY)		+= ebony.o
 obj-$(CONFIG_MTD_OCOTEA)	+= ocotea.o
-obj-$(CONFIG_MTD_BEECH)		+= beech-mtd.o
-obj-$(CONFIG_MTD_ARCTIC)	+= arctic-mtd.o
 obj-$(CONFIG_MTD_WALNUT)        += walnut.o
 obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
 obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o

drivers/mtd/maps/arctic-mtd.c

-/*
- * $Id: arctic-mtd.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
- * drivers/mtd/maps/arctic-mtd.c MTD mappings and partition tables for
- *                              IBM 405LP Arctic boards.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2002, International Business Machines Corporation
- * All Rights Reserved.
- *
- * Bishop Brock
- * IBM Research, Austin Center for Low-Power Computing
- * bcbrock@us.ibm.com
- * March 2002
- *
- * modified for Arctic by,
- * David Gibson
- * IBM OzLabs, Canberra, Australia
- * <arctic@gibson.dropbear.id.au>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/ibm4xx.h>
-
-/*
- * 0 : 0xFE00 0000 - 0xFEFF FFFF : Filesystem 1 (16MiB)
- * 1 : 0xFF00 0000 - 0xFF4F FFFF : kernel (5.12MiB)
- * 2 : 0xFF50 0000 - 0xFFF5 FFFF : Filesystem 2 (10.624MiB) (if non-XIP)
- * 3 : 0xFFF6 0000 - 0xFFFF FFFF : PIBS Firmware (640KiB)
- */
-
-#define FFS1_SIZE	0x01000000 /* 16MiB */
-#define KERNEL_SIZE	0x00500000 /* 5.12MiB */
-#define FFS2_SIZE	0x00a60000 /* 10.624MiB */
-#define FIRMWARE_SIZE	0x000a0000 /* 640KiB */
-
-
-#define NAME     	"Arctic Linux Flash"
-#define PADDR    	SUBZERO_BOOTFLASH_PADDR
-#define BUSWIDTH	2
-#define SIZE		SUBZERO_BOOTFLASH_SIZE
-#define PARTITIONS	4
-
-/* Flash memories on these boards are memory resources, accessed big-endian. */
-
-{
-  /* do nothing for now */
-}
-
-static struct map_info arctic_mtd_map = {
-	.name		= NAME,
-	.size		= SIZE,
-	.bankwidth	= BUSWIDTH,
-	.phys		= PADDR,
-};
-
-static struct mtd_info *arctic_mtd;
-
-static struct mtd_partition arctic_partitions[PARTITIONS] = {
-	{ .name		= "Filesystem",
-	  .size		= FFS1_SIZE,
-	  .offset	= 0,},
-        { .name		= "Kernel",
-	  .size		= KERNEL_SIZE,
-	  .offset	= FFS1_SIZE,},
-	{ .name		= "Filesystem",
-	  .size		= FFS2_SIZE,
-	  .offset	= FFS1_SIZE + KERNEL_SIZE,},
-	{ .name		= "Firmware",
-	  .size		= FIRMWARE_SIZE,
-	  .offset	= SUBZERO_BOOTFLASH_SIZE - FIRMWARE_SIZE,},
-};
-
-static int __init
-init_arctic_mtd(void)
-{
-	int err;
-
-	printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR);
-
-	arctic_mtd_map.virt = ioremap(PADDR, SIZE);
-
-	if (!arctic_mtd_map.virt) {
-		printk("%s: failed to ioremap 0x%x\n", NAME, PADDR);
-		return -EIO;
-	}
-	simple_map_init(&arctic_mtd_map);
-
-	printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8);
-	arctic_mtd = do_map_probe("cfi_probe", &arctic_mtd_map);
-
-	if (!arctic_mtd) {
-		iounmap(arctic_mtd_map.virt);
-		return -ENXIO;
-	}
-
-	arctic_mtd->owner = THIS_MODULE;
-
-	err = add_mtd_partitions(arctic_mtd, arctic_partitions, PARTITIONS);
-	if (err) {
-		printk("%s: add_mtd_partitions failed\n", NAME);
-		iounmap(arctic_mtd_map.virt);
-	}
-
-	return err;
-}
-
-static void __exit
-cleanup_arctic_mtd(void)
-{
-	if (arctic_mtd) {
-		del_mtd_partitions(arctic_mtd);
-		map_destroy(arctic_mtd);
-		iounmap((void *) arctic_mtd_map.virt);
-	}
-}
-
-module_init(init_arctic_mtd);
-module_exit(cleanup_arctic_mtd);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Gibson <arctic@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 405LP Arctic boards");

drivers/mtd/maps/beech-mtd.c

-/*
- * $Id: beech-mtd.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
- *
- * drivers/mtd/maps/beech-mtd.c MTD mappings and partition tables for
- *                              IBM 405LP Beech boards.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2002, International Business Machines Corporation
- * All Rights Reserved.
- *
- * Bishop Brock
- * IBM Research, Austin Center for Low-Power Computing
- * bcbrock@us.ibm.com
- * March 2002
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/ibm4xx.h>
-
-#define NAME     "Beech Linux Flash"
-#define PADDR    BEECH_BIGFLASH_PADDR
-#define SIZE     BEECH_BIGFLASH_SIZE
-#define BUSWIDTH 1
-
-/* Flash memories on these boards are memory resources, accessed big-endian. */
-
-
-static struct map_info beech_mtd_map = {
-	.name =		NAME,
-	.size =		SIZE,
-	.bankwidth =	BUSWIDTH,
-	.phys =		PADDR
-};
-
-static struct mtd_info *beech_mtd;
-
-static struct mtd_partition beech_partitions[2] = {
-	{
-	      .name = "Linux Kernel",
-	      .size = BEECH_KERNEL_SIZE,
-	      .offset = BEECH_KERNEL_OFFSET
-	}, {
-	      .name = "Free Area",
-	      .size = BEECH_FREE_AREA_SIZE,
-	      .offset = BEECH_FREE_AREA_OFFSET
-	}
-};
-
-static int __init
-init_beech_mtd(void)
-{
-	int err;
-
-	printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR);
-
-	beech_mtd_map.virt = ioremap(PADDR, SIZE);
-
-	if (!beech_mtd_map.virt) {
-		printk("%s: failed to ioremap 0x%x\n", NAME, PADDR);
-		return -EIO;
-	}
-
-	simple_map_init(&beech_mtd_map);
-
-	printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8);
-	beech_mtd = do_map_probe("cfi_probe", &beech_mtd_map);
-
-	if (!beech_mtd) {
-		iounmap(beech_mtd_map.virt);
-		return -ENXIO;
-	}
-
-	beech_mtd->owner = THIS_MODULE;
-
-	err = add_mtd_partitions(beech_mtd, beech_partitions, 2);
-	if (err) {
-		printk("%s: add_mtd_partitions failed\n", NAME);
-		iounmap(beech_mtd_map.virt);
-	}
-
-	return err;
-}
-
-static void __exit
-cleanup_beech_mtd(void)
-{
-	if (beech_mtd) {
-		del_mtd_partitions(beech_mtd);
-		map_destroy(beech_mtd);
-		iounmap((void *) beech_mtd_map.virt);
-	}
-}
-
-module_init(init_beech_mtd);
-module_exit(cleanup_beech_mtd);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Bishop Brock <bcbrock@us.ibm.com>");
-MODULE_DESCRIPTION("MTD map and partitions for IBM 405LP Beech boards");

drivers/mtd/maps/physmap_of.c

@@ -186,7 +186,7 @@ static int __devinit of_physmap_probe(struct of_device *dev, const struct of_dev
 	else {
  		if (strcmp(of_probe, "ROM"))
 			dev_dbg(&dev->dev, "map_probe: don't know probe type "
-			"'%s', mapping as rom\n");
+			"'%s', mapping as rom\n", of_probe);
 		info->mtd = do_map_probe("mtd_rom", &info->map);
 	}
 	if (info->mtd == NULL) {

drivers/mtd/mtdpart.c

@@ -347,7 +347,6 @@ int add_mtd_partitions(struct mtd_info *master,
 		slave->mtd.subpage_sft = master->subpage_sft;
 
 		slave->mtd.name = parts[i].name;
-		slave->mtd.bank_size = master->bank_size;
 		slave->mtd.owner = master->owner;
 
 		slave->mtd.read = part_read;

drivers/mtd/nand/Kconfig

@@ -232,11 +232,13 @@ config MTD_NAND_BASLER_EXCITE
           will be named "excite_nandflash.ko".
 
 config MTD_NAND_CAFE
-       tristate "NAND support for OLPC CAFÉ chip"
-       depends on PCI
-       help
-	 Use NAND flash attached to the CAFÉ chip designed for the $100
-	 laptop.
+	tristate "NAND support for OLPC CAFÉ chip"
+	depends on PCI
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC16
+	help
+	  Use NAND flash attached to the CAFÉ chip designed for the $100
+	  laptop.
 
 config MTD_NAND_CS553X
 	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
@@ -270,4 +272,13 @@ config MTD_NAND_NANDSIM
 	  The simulator may simulate various NAND flash chips for the
 	  MTD nand layer.
 
+config MTD_NAND_PLATFORM
+	tristate "Support for generic platform NAND driver"
+	depends on MTD_NAND
+	help
+	  This implements a generic NAND driver for on-SOC platform
+	  devices. You will need to provide platform-specific functions
+	  via platform_data.
+
+
 endif # MTD_NAND

drivers/mtd/nand/Makefile

@@ -26,6 +26,6 @@ obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
+obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
-cafe_nand-objs := cafe.o cafe_ecc.o

drivers/mtd/nand/at91_nand.c

@@ -82,6 +82,10 @@ static void at91_nand_disable(struct at91_nand_host *host)
 		at91_set_gpio_value(host->board->enable_pin, 1);
 }
 
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
 /*
  * Probe for the NAND device.
  */
@@ -151,6 +155,12 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 #ifdef CONFIG_MTD_PARTITIONS
 	if (host->board->partition_info)
 		partitions = host->board->partition_info(mtd->size, &num_partitions);
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	else {
+		mtd->name = "at91_nand";
+		num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
+	}
+#endif
 
 	if ((!partitions) || (num_partitions == 0)) {
 		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");

drivers/mtd/nand/nand_base.c

@@ -303,28 +303,27 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 	struct nand_chip *chip = mtd->priv;
 	u16 bad;
 
+	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+
 	if (getchip) {
-		page = (int)(ofs >> chip->page_shift);
 		chipnr = (int)(ofs >> chip->chip_shift);
 
 		nand_get_device(chip, mtd, FL_READING);
 
 		/* Select the NAND device */
 		chip->select_chip(mtd, chipnr);
-	} else
-		page = (int)(ofs >> chip->page_shift);
+	}
 
 	if (chip->options & NAND_BUSWIDTH_16) {
 		chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE,
-			      page & chip->pagemask);
+			      page);
 		bad = cpu_to_le16(chip->read_word(mtd));
 		if (chip->badblockpos & 0x1)
 			bad >>= 8;
 		if ((bad & 0xFF) != 0xff)
 			res = 1;
 	} else {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,
-			      page & chip->pagemask);
+		chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
 		if (chip->read_byte(mtd) != 0xff)
 			res = 1;
 	}

drivers/mtd/nand/plat_nand.c

+/*
+ * Generic NAND driver
+ *
+ * Author: Vitaly Wool <vitalywool@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+struct plat_nand_data {
+	struct nand_chip	chip;
+	struct mtd_info		mtd;
+	void __iomem		*io_base;
+#ifdef CONFIG_MTD_PARTITIONS
+	int			nr_parts;
+	struct mtd_partition	*parts;
+#endif
+};
+
+/*
+ * Probe for the NAND device.
+ */
+static int __init plat_nand_probe(struct platform_device *pdev)
+{
+	struct platform_nand_data *pdata = pdev->dev.platform_data;
+	struct plat_nand_data *data;
+	int res = 0;
+
+	/* Allocate memory for the device structure (and zero it) */
+	data = kzalloc(sizeof(struct plat_nand_data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "failed to allocate device structure.\n");
+		return -ENOMEM;
+	}
+
+	data->io_base = ioremap(pdev->resource[0].start,
+				pdev->resource[0].end - pdev->resource[0].start + 1);
+	if (data->io_base == NULL) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		kfree(data);
+		return -EIO;
+	}
+
+	data->chip.priv = &data;
+	data->mtd.priv = &data->chip;
+	data->mtd.owner = THIS_MODULE;
+
+	data->chip.IO_ADDR_R = data->io_base;
+	data->chip.IO_ADDR_W = data->io_base;
+	data->chip.cmd_ctrl = pdata->ctrl.cmd_ctrl;
+	data->chip.dev_ready = pdata->ctrl.dev_ready;
+	data->chip.select_chip = pdata->ctrl.select_chip;
+	data->chip.chip_delay = pdata->chip.chip_delay;
+	data->chip.options |= pdata->chip.options;
+
+	data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
+	data->chip.ecc.layout = pdata->chip.ecclayout;
+	data->chip.ecc.mode = NAND_ECC_SOFT;
+
+	platform_set_drvdata(pdev, data);
+
+	/* Scan to find existance of the device */
+	if (nand_scan(&data->mtd, 1)) {
+		res = -ENXIO;
+		goto out;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (pdata->chip.part_probe_types) {
+		res = parse_mtd_partitions(&data->mtd,
+					pdata->chip.part_probe_types,
+					&data->parts, 0);
+		if (res > 0) {
+			add_mtd_partitions(&data->mtd, data->parts, res);
+			return 0;
+		}
+	}
+	if (pdata->chip.partitions) {
+		data->parts = pdata->chip.partitions;
+		res = add_mtd_partitions(&data->mtd, data->parts,
+			pdata->chip.nr_partitions);
+	} else
+#endif
+	res = add_mtd_device(&data->mtd);
+
+	if (!res)
+		return res;
+
+	nand_release(&data->mtd);
+out:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(data->io_base);
+	kfree(data);
+	return res;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int __devexit plat_nand_remove(struct platform_device *pdev)
+{
+	struct plat_nand_data *data = platform_get_drvdata(pdev);
+	struct platform_nand_data *pdata = pdev->dev.platform_data;
+
+	nand_release(&data->mtd);
+#ifdef CONFIG_MTD_PARTITIONS
+	if (data->parts && data->parts != pdata->chip.partitions)
+		kfree(data->parts);
+#endif
+	iounmap(data->io_base);
+	kfree(data);
+
+	return 0;
+}
+
+static struct platform_driver plat_nand_driver = {
+	.probe		= plat_nand_probe,
+	.remove		= plat_nand_remove,
+	.driver		= {
+		.name	= "gen_nand",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init plat_nand_init(void)
+{
+	return platform_driver_register(&plat_nand_driver);
+}
+
+static void __exit plat_nand_exit(void)
+{
+	platform_driver_unregister(&plat_nand_driver);
+}
+
+module_init(plat_nand_init);
+module_exit(plat_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vitaly Wool");
+MODULE_DESCRIPTION("Simple generic NAND driver");

fs/jffs2/histo_mips.h

-#define BIT_DIVIDER_MIPS 1043
-static int bits_mips[8] = { 277,249,290,267,229,341,212,241}; /* mips32 */

fs/jffs2/wbuf.c

@@ -637,7 +637,10 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
 
 	memset(c->wbuf,0xff,c->wbuf_pagesize);
 	/* adjust write buffer offset, else we get a non contiguous write bug */
-	c->wbuf_ofs += c->wbuf_pagesize;
+	if (SECTOR_ADDR(c->wbuf_ofs) == SECTOR_ADDR(c->wbuf_ofs+c->wbuf_pagesize))
+		c->wbuf_ofs += c->wbuf_pagesize;
+	else
+		c->wbuf_ofs = 0xffffffff;
 	c->wbuf_len = 0;
 	return 0;
 }

include/linux/mtd/mtd.h

@@ -9,10 +9,6 @@
 #ifndef __MTD_MTD_H__
 #define __MTD_MTD_H__
 
-#ifndef __KERNEL__
-#error This is a kernel header. Perhaps include mtd-user.h instead?
-#endif
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/uio.h>
@@ -137,9 +133,6 @@ struct mtd_info {
 	int numeraseregions;
 	struct mtd_erase_region_info *eraseregions;
 
-	/* This really shouldn't be here. It can go away in 2.5 */
-	u_int32_t bank_size;
-
 	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
 
 	/* This stuff for eXecute-In-Place */