Skip to content

L
linux-davinci
Commit b88bd956 authored by Tilman Schmidt's avatar Tilman Schmidt Committed by David S. Miller
Browse files
Options

gigaset: remove UNDOCREQ config option 

Drop the kernel config option GIGASET_UNDOCREQ, permanently
activating the code it controlled, as there have been no reports
of problems caused by its activation but many problems caused by
it being disabled.
Also fix a few bad comments while we're at it.

Impact: cleanup
Signed-off-by: default avatarTilman Schmidt <tilman@imap.cc>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5a1888ea
Hide whitespace changes
Inline Side-by-side
Showing with 28 additions and 74 deletions
Documentation/isdn/README.gigaset
View file @ b88bd956
......@@ -149,10 +149,8 @@ GigaSet 307x Device Driver
configuration files and chat scripts in the gigaset-VERSION/ppp directory
in the driver packages from http://sourceforge.net/projects/gigaset307x/.
Please note that the USB drivers are not able to change the state of the
control lines (the M105 driver can be configured to use some undocumented
control requests, if you really need the control lines, though). This means
you must use "Stupid Mode" if you are using wvdial or you should use the
nocrtscts option of pppd.
control lines. This means you must use "Stupid Mode" if you are using
wvdial or you should use the nocrtscts option of pppd.
You must also assure that the ppp_async module is loaded with the parameter
flag_time=0. You can do this e.g. by adding a line like
......@@ -190,20 +188,7 @@ GigaSet 307x Device Driver
You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
setting (ttyGxy is ttyGU0 or ttyGB0).
2.6. M105 Undocumented USB Requests
------------------------------
The Gigaset M105 USB data box understands a couple of useful, but
undocumented USB commands. These requests are not used in normal
operation (for wireless access to the base), but are needed for access
to the M105's own configuration mode (registration to the base, baudrate
and line format settings, device status queries) via the gigacontr
utility. Their use is controlled by the kernel configuration option
"Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you
encounter error code -ENOTTY when trying to use some features of the
M105, try setting that option to "y" via 'make {x,menu}config' and
recompiling the driver.
2.7. Unregistered Wireless Devices (M101/M105)
2.6. Unregistered Wireless Devices (M101/M105)
-----------------------------------------
The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
the M101 and M105 wireless devices to be used as ISDN devices for ISDN
......@@ -215,8 +200,7 @@ GigaSet 307x Device Driver
driver. In that situation, a restricted set of functions is available
which includes, in particular, those necessary for registering the device
to a base or for switching it between Fixed Part and Portable Part
modes. For the M105, these commands require the "Support for undocumented
USB requests" configuration option (see section 2.6.) to be enabled.
modes.
3. Troubleshooting
---------------
......@@ -246,20 +230,13 @@ GigaSet 307x Device Driver
Solution:
Select Unimodem mode for all DECT data adapters. (see section 2.4.)
Problem:
You want to configure your USB DECT data adapter (M105) but gigacontr
reports an error: "/dev/ttyGU0: Inappropriate ioctl for device".
Solution:
Recompile the usb_gigaset driver with the kernel configuration option
CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.)
Problem:
Messages like this:
usb_gigaset 3-2:1.0: Could not initialize the device.
appear in your syslog.
Solution:
Check whether your M10x wireless device is correctly registered to the
Gigaset base. (see section 2.7.)
Gigaset base. (see section 2.6.)
3.2. Telling the driver to provide more information
----------------------------------------------
......
drivers/isdn/gigaset/Kconfig
View file @ b88bd956
......@@ -43,11 +43,4 @@ config GIGASET_DEBUG
This enables debugging code in the Gigaset drivers.
If in doubt, say yes.
config GIGASET_UNDOCREQ
bool "Support for undocumented USB requests"
help
This enables support for USB requests we only know from
reverse engineering (currently M105 only). If you need
features like configuration mode of M105, say yes.
endif # ISDN_DRV_GIGASET
drivers/isdn/gigaset/usb-gigaset.c
View file @ b88bd956
......@@ -153,8 +153,6 @@ static inline unsigned tiocm_to_gigaset(unsigned state)
return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
}
#ifdef CONFIG_GIGASET_UNDOCREQ
/* WARNING: EXPERIMENTAL! */
static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
unsigned new_state)
{
......@@ -176,6 +174,11 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
return 0;
}
/*
* Set M105 configuration value
* using undocumented device commands reverse engineered from USB traces
* of the Siemens Windows driver
*/
static int set_value(struct cardstate *cs, u8 req, u16 val)
{
struct usb_device *udev = cs->hw.usb->udev;
......@@ -205,8 +208,10 @@ static int set_value(struct cardstate *cs, u8 req, u16 val)
return r < 0 ? r : (r2 < 0 ? r2 : 0);
}
/* WARNING: HIGHLY EXPERIMENTAL! */
// don't use this in an interrupt/BH
/*
* set the baud rate on the internal serial adapter
* using the undocumented parameter setting command
*/
static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
{
u16 val;
......@@ -237,8 +242,10 @@ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
return set_value(cs, 1, val);
}
/* WARNING: HIGHLY EXPERIMENTAL! */
// don't use this in an interrupt/BH
/*
* set the line format on the internal serial adapter
* using the undocumented parameter setting command
*/
static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
{
u16 val = 0;
......@@ -274,24 +281,6 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
return set_value(cs, 3, val);
}
#else
static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
unsigned new_state)
{
return -ENOTTY;
}
static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
{
return -ENOTTY;
}
static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
{
return -ENOTTY;
}
#endif
/*================================================================================================================*/
static int gigaset_init_bchannel(struct bc_state *bcs)
......@@ -362,10 +351,8 @@ static void gigaset_modem_fill(unsigned long data)
} while (again);
}
/**
* gigaset_read_int_callback
*
* It is called if the data was received from the device.
/*
* Interrupt Input URB completion routine
*/
static void gigaset_read_int_callback(struct urb *urb)
{
......@@ -567,18 +554,19 @@ static int gigaset_chars_in_buffer(struct cardstate *cs)
return cs->cmdbytes;
}
/*
* set the break characters on the internal serial adapter
* using undocumented device commands reverse engineered from USB traces
* of the Siemens Windows driver
*/
static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
{
#ifdef CONFIG_GIGASET_UNDOCREQ
struct usb_device *udev = cs->hw.usb->udev;
gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
memcpy(cs->hw.usb->bchars, buf, 6);
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
0, 0, &buf, 6, 2000);
#else
return -ENOTTY;
#endif
}
static int gigaset_freebcshw(struct bc_state *bcs)
......@@ -625,7 +613,6 @@ static int gigaset_initcshw(struct cardstate *cs)
ucs->bchars[5] = 0x13;
ucs->bulk_out_buffer = NULL;
ucs->bulk_out_urb = NULL;
//ucs->urb_cmd_out = NULL;
ucs->read_urb = NULL;
tasklet_init(&cs->write_tasklet,
&gigaset_modem_fill, (unsigned long) cs);
......@@ -742,7 +729,7 @@ static int gigaset_probe(struct usb_interface *interface,
cs->dev = &interface->dev;
/* save address of controller structure */
usb_set_intfdata(interface, cs); // dev_set_drvdata(&interface->dev, cs);
usb_set_intfdata(interface, cs);
endpoint = &hostif->endpoint[0].desc;
......@@ -921,8 +908,7 @@ static const struct gigaset_ops ops = {
gigaset_m10x_input,
};
/**
* usb_gigaset_init
/*
* This function is called while kernel-module is loaded
*/
static int __init usb_gigaset_init(void)
......@@ -952,9 +938,7 @@ error:
return -1;
}
/**
* usb_gigaset_exit
/*
* This function is called while unloading the kernel-module
*/
static void __exit usb_gigaset_exit(void)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment