Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4680/1: parentheses around NR_IRQS definition
  [ARM] 4679/1: AT91: Change maintainer email address
  [ARM] 4675/1: pxa: fix mfp address definition error for pxa320
  [ARM] 4674/1: pxa: increase LCD PCLK drive strength to fast 2mA for PXA300/PXA310
  [ARM] 4673/1: pxa: add missing IRQ_SSP4 definitions for PXA3xx
  [ARM] 4672/1: pxa: fix DRCMR(n) to support PXA27x and later processors
  [ARM] 4665/1: fix __und_usr wrt accessing the undefined insn in user space
  [ARM] 4659/1: remove possibilities for spurious false negative with __kuser_cmpxchg
  [ARM] 4661/1: fix do_undefinstr wrt the enabling of IRQs
  [ARM] uengine: fix memset size error
  [ARM] 4648/1: i.MX/MX1 ensure more complete AITC initialization
  [ARM] 4611/2: AT91: Fix GPIO buttons pins on SAM9261-EK.
  [ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpio
  [ARM] 4604/2: AT91: Master clock divistor on SAM9
  [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled
  [ARM] PXA ssp: unlock when ssp tries to close an invalid port
  [ARM] 4654/1: pxa: update default MFP register value
  [ARM] 4653/1: pxa: fix a gpio typo in mfp-pxa320.h
  [ARM] 4652/1: pxa: fix a typo of pxa27x usb host clk definition
  [ARM] 4651/1: pxa: add PXA3xx specific IRQ definitions

MAINTAINERS

@@ -439,7 +439,7 @@ S:	Maintained
 
 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
 P:      Andrew Victor
-M:      andrew@sanpeople.com
+M:      linux@maxim.org.za
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://maxim.org.za/at91_26.html
 S:      Maintained

arch/arm/common/uengine.c

@@ -374,8 +374,8 @@ static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
 	u8 *ucode;
 	int i;
 
-	gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL);
-	gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL);
+	gpr_a = kzalloc(128 * sizeof(u32), GFP_KERNEL);
+	gpr_b = kzalloc(128 * sizeof(u32), GFP_KERNEL);
 	ucode = kmalloc(513 * 5, GFP_KERNEL);
 	if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
 		kfree(ucode);
@@ -388,8 +388,6 @@ static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
 	if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
 		per_ctx_regs = 32;
 
-	memset(gpr_a, 0, sizeof(gpr_a));
-	memset(gpr_b, 0, sizeof(gpr_b));
 	for (i = 0; i < 256; i++) {
 		struct ixp2000_reg_value *r = c->initial_reg_values + i;
 		u32 *bank;

arch/arm/kernel/entry-armv.S

@@ -339,16 +339,6 @@ __pabt_svc:
 	str	r1, [sp]		@ save the "real" r0 copied
 					@ from the exception stack
 
-#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-#ifndef CONFIG_MMU
-#warning "NPTL on non MMU needs fixing"
-#else
-	@ make sure our user space atomic helper is aborted
-	cmp	r2, #TASK_SIZE
-	bichs	r3, r3, #PSR_Z_BIT
-#endif
-#endif
-
 	@
 	@ We are now ready to fill in the remaining blanks on the stack:
 	@
@@ -372,9 +362,25 @@ __pabt_svc:
 	zero_fp
 	.endm
 
+	.macro	kuser_cmpxchg_check
+#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#ifndef CONFIG_MMU
+#warning "NPTL on non MMU needs fixing"
+#else
+	@ Make sure our user space atomic helper is restarted
+	@ if it was interrupted in a critical region.  Here we
+	@ perform a quick test inline since it should be false
+	@ 99.9999% of the time.  The rest is done out of line.
+	cmp	r2, #TASK_SIZE
+	blhs	kuser_cmpxchg_fixup
+#endif
+#endif
+	.endm
+
 	.align	5
 __dabt_usr:
 	usr_entry
+	kuser_cmpxchg_check
 
 	@
 	@ Call the processor-specific abort handler:
@@ -404,6 +410,7 @@ __dabt_usr:
 	.align	5
 __irq_usr:
 	usr_entry
+	kuser_cmpxchg_check
 
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
@@ -446,9 +453,9 @@ __und_usr:
 	@
 	@  r0 - instruction
 	@
-1:	ldrt	r0, [r4]
 	adr	r9, ret_from_exception
 	adr	lr, __und_usr_unknown
+1:	ldrt	r0, [r4]
 	@
 	@ fallthrough to call_fpe
 	@
@@ -669,7 +676,7 @@ __kuser_helper_start:
  *
  * Clobbered:
  *
- *	the Z flag might be lost
+ *	none
  *
  * Definition and user space usage example:
  *
@@ -730,9 +737,6 @@ __kuser_memory_barrier:				@ 0xffff0fa0
  *
  *    - This routine already includes memory barriers as needed.
  *
- *    - A failure might be transient, i.e. it is possible, although unlikely,
- *      that "failure" be returned even if *ptr == oldval.
- *
  * For example, a user space atomic_add implementation could look like this:
  *
  * #define atomic_add(ptr, val) \
@@ -769,46 +773,62 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 
 #elif __LINUX_ARM_ARCH__ < 6
 
+#ifdef CONFIG_MMU
+
 	/*
-	 * Theory of operation:
-	 *
-	 * We set the Z flag before loading oldval. If ever an exception
-	 * occurs we can not be sure the loaded value will still be the same
-	 * when the exception returns, therefore the user exception handler
-	 * will clear the Z flag whenever the interrupted user code was
-	 * actually from the kernel address space (see the usr_entry macro).
-	 *
-	 * The post-increment on the str is used to prevent a race with an
-	 * exception happening just after the str instruction which would
-	 * clear the Z flag although the exchange was done.
+	 * The only thing that can break atomicity in this cmpxchg
+	 * implementation is either an IRQ or a data abort exception
+	 * causing another process/thread to be scheduled in the middle
+	 * of the critical sequence.  To prevent this, code is added to
+	 * the IRQ and data abort exception handlers to set the pc back
+	 * to the beginning of the critical section if it is found to be
+	 * within that critical section (see kuser_cmpxchg_fixup).
 	 */
-#ifdef CONFIG_MMU
-	teq	ip, ip			@ set Z flag
-	ldr	ip, [r2]		@ load current val
-	add	r3, r2, #1		@ prepare store ptr
-	teqeq	ip, r0			@ compare with oldval if still allowed
-	streq	r1, [r3, #-1]!		@ store newval if still allowed
-	subs	r0, r2, r3		@ if r2 == r3 the str occured
+1:	ldr	r3, [r2]			@ load current val
+	subs	r3, r3, r0			@ compare with oldval
+2:	streq	r1, [r2]			@ store newval if eq
+	rsbs	r0, r3, #0			@ set return val and C flag
+	usr_ret	lr
+
+	.text
+kuser_cmpxchg_fixup:
+	@ Called from kuser_cmpxchg_check macro.
+	@ r2 = address of interrupted insn (must be preserved).
+	@ sp = saved regs. r7 and r8 are clobbered.
+	@ 1b = first critical insn, 2b = last critical insn.
+	@ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b.
+	mov	r7, #0xffff0fff
+	sub	r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
+	subs	r8, r2, r7
+	rsbcss	r8, r8, #(2b - 1b)
+	strcs	r7, [sp, #S_PC]
+	mov	pc, lr
+	.previous
+
 #else
 #warning "NPTL on non MMU needs fixing"
 	mov	r0, #-1
 	adds	r0, r0, #0
-#endif
 	usr_ret	lr
+#endif
 
 #else
 
 #ifdef CONFIG_SMP
 	mcr	p15, 0, r0, c7, c10, 5	@ dmb
 #endif
-	ldrex	r3, [r2]
+1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]
+	teqeq	r3, #1
+	beq	1b
 	rsbs	r0, r3, #0
+	/* beware -- each __kuser slot must be 8 instructions max */
 #ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	b	__kuser_memory_barrier
+#else
 	usr_ret	lr
+#endif
 
 #endif
 
@@ -829,7 +849,7 @@ __kuser_cmpxchg:				@ 0xffff0fc0
  *
  * Clobbered:
  *
- *	the Z flag might be lost
+ *	none
  *
  * Definition and user space usage example:
  *

arch/arm/kernel/traps.c

@@ -327,7 +327,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 		if ((instr & hook->instr_mask) == hook->instr_val &&
 		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
 			if (hook->fn(regs, instr) == 0) {
-				spin_unlock_irq(&undef_lock);
+				spin_unlock_irqrestore(&undef_lock, flags);
 				return;
 			}
 		}
@@ -509,7 +509,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	 * existence.  Don't ever use this from user code.
 	 */
 	case 0xfff0:
-	{
+	for (;;) {
 		extern void do_DataAbort(unsigned long addr, unsigned int fsr,
 					 struct pt_regs *regs);
 		unsigned long val;
@@ -545,7 +545,6 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		up_read(&mm->mmap_sem);
 		/* simulate a write access fault */
 		do_DataAbort(addr, 15 + (1 << 11), regs);
-		return -1;
 	}
 #endif
 

arch/arm/mach-at91/at91rm9200_devices.c

@@ -14,6 +14,7 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
@@ -435,7 +436,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
  *  TWI (i2c)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= AT91_PIN_PA25,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA26,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91rm9200_twi_device = {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	at91_set_GPIO_periph(AT91_PIN_PA25, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(AT91_PIN_PA25, 1);
+
+	at91_set_GPIO_periph(AT91_PIN_PA26, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(AT91_PIN_PA26, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at91rm9200_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 
 static struct resource twi_resources[] = {
 	[0] = {
@@ -457,7 +491,7 @@ static struct platform_device at91rm9200_twi_device = {
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
 	/* pins used for TWI interface */
 	at91_set_A_periph(AT91_PIN_PA25, 0);		/* TWD */
@@ -466,10 +500,11 @@ void __init at91_add_device_i2c(void)
 	at91_set_A_periph(AT91_PIN_PA26, 0);		/* TWCK */
 	at91_set_multi_drive(AT91_PIN_PA26, 1);
 
+	i2c_register_board_info(0, devices, nr_devices);
 	platform_device_register(&at91rm9200_twi_device);
 }
 #else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 #endif
 
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -13,6 +13,7 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
@@ -352,7 +353,41 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
  *  TWI (i2c)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= AT91_PIN_PA23,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA24,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9260_twi_device = {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	at91_set_GPIO_periph(AT91_PIN_PA23, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+	at91_set_GPIO_periph(AT91_PIN_PA24, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at91sam9260_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 
 static struct resource twi_resources[] = {
 	[0] = {
@@ -374,7 +409,7 @@ static struct platform_device at91sam9260_twi_device = {
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
 	/* pins used for TWI interface */
 	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
@@ -383,10 +418,11 @@ void __init at91_add_device_i2c(void)
 	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
 	at91_set_multi_drive(AT91_PIN_PA24, 1);
 
+	i2c_register_board_info(0, devices, nr_devices);
 	platform_device_register(&at91sam9260_twi_device);
 }
 #else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 #endif
 
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -14,7 +14,9 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
 
+#include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/arch/board.h>
@@ -275,7 +277,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
  *  TWI (i2c)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= AT91_PIN_PA7,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA8,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9261_twi_device = {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	at91_set_GPIO_periph(AT91_PIN_PA7, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+	at91_set_GPIO_periph(AT91_PIN_PA8, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at91sam9261_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 
 static struct resource twi_resources[] = {
 	[0] = {
@@ -297,7 +332,7 @@ static struct platform_device at91sam9261_twi_device = {
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
 	/* pins used for TWI interface */
 	at91_set_A_periph(AT91_PIN_PA7, 0);		/* TWD */
@@ -306,10 +341,11 @@ void __init at91_add_device_i2c(void)
 	at91_set_A_periph(AT91_PIN_PA8, 0);		/* TWCK */
 	at91_set_multi_drive(AT91_PIN_PA8, 1);
 
+	i2c_register_board_info(0, devices, nr_devices);
 	platform_device_register(&at91sam9261_twi_device);
 }
 #else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 #endif
 
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -13,7 +13,9 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
 
+#include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/arch/board.h>
@@ -421,7 +423,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
  *  TWI (i2c)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= AT91_PIN_PB4,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB5,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9263_twi_device = {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	at91_set_GPIO_periph(AT91_PIN_PB4, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_GPIO_periph(AT91_PIN_PB5, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at91sam9263_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 
 static struct resource twi_resources[] = {
 	[0] = {
@@ -443,7 +478,7 @@ static struct platform_device at91sam9263_twi_device = {
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
 	/* pins used for TWI interface */
 	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
@@ -452,10 +487,11 @@ void __init at91_add_device_i2c(void)
 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
 	at91_set_multi_drive(AT91_PIN_PB5, 1);
 
+	i2c_register_board_info(0, devices, nr_devices);
 	platform_device_register(&at91sam9263_twi_device);
 }
 #else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 #endif
 
 

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -10,8 +10,9 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_device.h>
-#include <linux/fb.h>
+#include <linux/i2c-gpio.h>
 
+#include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/arch/board.h>
@@ -169,7 +170,40 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
  *  TWI (i2c)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= AT91_PIN_PA23,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA24,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9rl_twi_device = {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	at91_set_GPIO_periph(AT91_PIN_PA23, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+	at91_set_GPIO_periph(AT91_PIN_PA24, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at91sam9rl_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 
 static struct resource twi_resources[] = {
 	[0] = {
@@ -191,7 +225,7 @@ static struct platform_device at91sam9rl_twi_device = {
 	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
-void __init at91_add_device_i2c(void)
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 {
 	/* pins used for TWI interface */
 	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
@@ -200,10 +234,11 @@ void __init at91_add_device_i2c(void)
 	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
 	at91_set_multi_drive(AT91_PIN_PA24, 1);
 
+	i2c_register_board_info(0, devices, nr_devices);
 	platform_device_register(&at91sam9rl_twi_device);
 }
 #else
-void __init at91_add_device_i2c(void) {}
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 #endif
 
 

arch/arm/mach-at91/board-carmeva.c

@@ -128,7 +128,7 @@ static void __init carmeva_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&carmeva_udc_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
 	/* Compact Flash */

arch/arm/mach-at91/board-csb337.c

@@ -23,7 +23,6 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
@@ -85,12 +84,12 @@ static struct at91_udc_data __initdata csb337_udc_data = {
 };
 
 static struct i2c_board_info __initdata csb337_i2c_devices[] = {
-	{ I2C_BOARD_INFO("rtc-ds1307", 0x68),
-	  .type = "ds1307",
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0x68),
+		.type	= "ds1307",
 	},
 };
 
-
 static struct at91_cf_data __initdata csb337_cf_data = {
 	/*
 	 * connector P4 on the CSB 337 mates to
@@ -168,9 +167,7 @@ static void __init csb337_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&csb337_udc_data);
 	/* I2C */
-	at91_add_device_i2c();
-	i2c_register_board_info(0, csb337_i2c_devices,
-			ARRAY_SIZE(csb337_i2c_devices));
+	at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
 	/* Compact Flash */
 	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
 	at91_add_device_cf(&csb337_cf_data);

arch/arm/mach-at91/board-csb637.c

@@ -129,7 +129,7 @@ static void __init csb637_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&csb637_udc_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
 	/* NOR flash */

arch/arm/mach-at91/board-dk.c

@@ -124,6 +124,19 @@ static struct spi_board_info dk_spi_devices[] = {
 #endif
 };
 
+static struct i2c_board_info __initdata dk_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ics1523", 0x26),
+	},
+	{
+		I2C_BOARD_INFO("x9429", 0x28),
+	},
+	{
+		I2C_BOARD_INFO("at24c", 0x50),
+		.type	= "24c1024",
+	}
+};
+
 static struct mtd_partition __initdata dk_nand_partition[] = {
 	{
 		.name	= "NAND Partition 1",
@@ -185,7 +198,7 @@ static void __init dk_board_init(void)
 	/* Compact Flash */
 	at91_add_device_cf(&dk_cf_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
 	/* SPI */
 	at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD

arch/arm/mach-at91/board-eb9200.c

@@ -91,6 +91,14 @@ static struct at91_mmc_data __initdata eb9200_mmc_data = {
 	.wire4		= 1,
 };
 
+static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24c", 0x50),
+		.type	= "24c512",
+	},
+};
+
+
 static void __init eb9200_board_init(void)
 {
 	/* Serial */
@@ -102,7 +110,7 @@ static void __init eb9200_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&eb9200_udc_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
 	/* Compact Flash */
 	at91_add_device_cf(&eb9200_cf_data);
 	/* SPI */

arch/arm/mach-at91/board-ek.c

@@ -145,7 +145,7 @@ static void __init ek_board_init(void)
 	at91_add_device_udc(&ek_udc_data);
 	at91_set_multi_drive(ek_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD

arch/arm/mach-at91/board-kafa.c

@@ -92,7 +92,7 @@ static void __init kafa_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kafa_udc_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
 }

arch/arm/mach-at91/board-kb9202.c

@@ -124,7 +124,7 @@ static void __init kb9202_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &kb9202_mmc_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
 	/* NAND */

arch/arm/mach-at91/board-picotux200.c

@@ -139,7 +139,7 @@ static void __init picotux200_board_init(void)
 	// at91_add_device_udc(&picotux200_udc_data);
 	// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* SPI */
 	// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD

arch/arm/mach-at91/board-sam9260ek.c

@@ -189,7 +189,7 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")

arch/arm/mach-at91/board-sam9261ek.c

@@ -382,14 +382,14 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_gpio_input(AT91_PIN_PB27, 0);	/* btn0 */
-	at91_set_deglitch(AT91_PIN_PB27, 1);
-	at91_set_gpio_input(AT91_PIN_PB26, 0);	/* btn1 */
-	at91_set_deglitch(AT91_PIN_PB26, 1);
-	at91_set_gpio_input(AT91_PIN_PB25, 0);	/* btn2 */
-	at91_set_deglitch(AT91_PIN_PB25, 1);
-	at91_set_gpio_input(AT91_PIN_PB24, 0);	/* btn3 */
-	at91_set_deglitch(AT91_PIN_PB24, 1);
+	at91_set_gpio_input(AT91_PIN_PA27, 0);	/* btn0 */
+	at91_set_deglitch(AT91_PIN_PA27, 1);
+	at91_set_gpio_input(AT91_PIN_PA26, 0);	/* btn1 */
+	at91_set_deglitch(AT91_PIN_PA26, 1);
+	at91_set_gpio_input(AT91_PIN_PA25, 0);	/* btn2 */
+	at91_set_deglitch(AT91_PIN_PA25, 1);
+	at91_set_gpio_input(AT91_PIN_PA24, 0);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA24, 1);
 
 	platform_device_register(&ek_button_device);
 }
@@ -406,7 +406,7 @@ static void __init ek_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&ek_udc_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
 	/* DM9000 ethernet */

arch/arm/mach-at91/board-sam9263ek.c

@@ -291,7 +291,7 @@ static void __init ek_board_init(void)
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* AC97 */

arch/arm/mach-at91/board-sam9rlek.c

@@ -181,7 +181,7 @@ static void __init ek_board_init(void)
 	/* Serial */
 	at91_add_device_serial();
 	/* I2C */
-	at91_add_device_i2c();
+	at91_add_device_i2c(NULL, 0);
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
 	/* SPI */

arch/arm/mach-at91/clock.c

@@ -351,7 +351,7 @@ static void init_programmable_clock(struct clk *clk)
 	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
 	parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
 	clk->parent = parent;
-	clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
+	clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2));
 }
 
 #endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
@@ -587,8 +587,11 @@ int __init at91_clock_init(unsigned long main_clock)
 	mckr = at91_sys_read(AT91_PMC_MCKR);
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
-	freq /= (1 << ((mckr >> 2) & 3));		/* prescale */
-	mck.rate_hz = freq / (1 + ((mckr >> 8) & 3));	/* mdiv */
+	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
+	if (cpu_is_at91rm9200())
+		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
+	else
+		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)

arch/arm/mach-imx/irq.c

@@ -43,12 +43,46 @@
  *
  */
 
-#define INTENNUM_OFF              0x8
-#define INTDISNUM_OFF             0xC
+#define INTCNTL_OFF               0x00
+#define NIMASK_OFF                0x04
+#define INTENNUM_OFF              0x08
+#define INTDISNUM_OFF             0x0C
+#define INTENABLEH_OFF            0x10
+#define INTENABLEL_OFF            0x14
+#define INTTYPEH_OFF              0x18
+#define INTTYPEL_OFF              0x1C
+#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
+#define NIVECSR_OFF               0x40
+#define FIVECSR_OFF               0x44
+#define INTSRCH_OFF               0x48
+#define INTSRCL_OFF               0x4C
+#define INTFRCH_OFF               0x50
+#define INTFRCL_OFF               0x54
+#define NIPNDH_OFF                0x58
+#define NIPNDL_OFF                0x5C
+#define FIPNDH_OFF                0x60
+#define FIPNDL_OFF                0x64
 
 #define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
+#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
+#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
 #define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
+#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
+#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
+#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
+#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
+#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
+#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
+#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
+#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
+#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
+#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
+#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
+#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
+#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
+#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
+#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
+#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
 
 #if 0
 #define DEBUG_IRQ(fmt...)	printk(fmt)
@@ -222,7 +256,12 @@ imx_init_irq(void)
 
 	DEBUG_IRQ("Initializing imx interrupts\n");
 
-	/* Mask all interrupts initially */
+	/* Disable all interrupts initially. */
+	/* Do not rely on the bootloader. */
+	__raw_writel(0, IMX_AITC_INTENABLEH);
+	__raw_writel(0, IMX_AITC_INTENABLEL);
+
+	/* Mask all GPIO interrupts as well */
 	IMR(0) = 0;
 	IMR(1) = 0;
 	IMR(2) = 0;
@@ -245,6 +284,6 @@ imx_init_irq(void)
 	set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
 	set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
 
-	/* Disable all interrupts initially. */
-	/* In IMX this is done in the bootloader. */
+	/* Release masking of interrupts according to priority */
+	__raw_writel(-1, IMX_AITC_NIMASK);
 }

arch/arm/mach-pxa/pxa27x.c

@@ -146,7 +146,7 @@ static struct clk pxa27x_clks[] = {
 	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
 
-	INIT_CKEN("USBCLK", USB,    48000000, 0, &pxa27x_device_ohci.dev),
+	INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
 	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
 	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
 

arch/arm/mach-pxa/pxa320.c

@@ -23,8 +23,11 @@
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
-	MFP_ADDR_X(GPIO5,  GPIO26,  0x028C),
-	MFP_ADDR_X(GPIO27, GPIO62,  0x0400),
+	MFP_ADDR_X(GPIO5,  GPIO9,   0x028C),
+	MFP_ADDR(GPIO10, 0x0458),
+	MFP_ADDR_X(GPIO11, GPIO26,  0x02A0),
+	MFP_ADDR_X(GPIO27, GPIO48,  0x0400),
+	MFP_ADDR_X(GPIO49, GPIO62,  0x045C),
 	MFP_ADDR_X(GPIO63, GPIO73,  0x04B4),
 	MFP_ADDR_X(GPIO74, GPIO98,  0x04F0),
 	MFP_ADDR_X(GPIO99, GPIO127, 0x0600),

arch/arm/mach-pxa/ssp.c

@@ -309,6 +309,7 @@ void ssp_exit(struct ssp_dev *dev)
 
     	if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
 		printk(KERN_WARNING "SSP: tried to close invalid port\n");
+		mutex_unlock(&mutex);
 		return;
 	}
 

drivers/serial/pxa.c

@@ -585,11 +585,11 @@ serial_pxa_type(struct uart_port *port)
 	return up->name;
 }
 
-#ifdef CONFIG_SERIAL_PXA_CONSOLE
-
 static struct uart_pxa_port *serial_pxa_ports[4];
 static struct uart_driver serial_pxa_reg;
 
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
 /*

include/asm-arm/arch-at91/board.h

@@ -33,6 +33,7 @@
 
 #include <linux/mtd/partitions.h>
 #include <linux/device.h>
+#include <linux/i2c.h>
 #include <linux/spi/spi.h>
 
  /* USB Device */
@@ -94,7 +95,7 @@ struct at91_nand_data {
 extern void __init at91_add_device_nand(struct at91_nand_data *data);
 
  /* I2C*/
-extern void __init at91_add_device_i2c(void);
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
 
  /* SPI */
 extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);

include/asm-arm/arch-ixp23xx/irqs.h

@@ -153,7 +153,7 @@
  */
 #define NR_IXP23XX_MACH_IRQS 		32
 
-#define NR_IRQS				NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS
+#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
 
 #define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
 

include/asm-arm/arch-omap/board-innovator.h

@@ -37,7 +37,7 @@
 #define OMAP1510P1_EMIFF_PRI_VALUE		0x00
 
 #define NR_FPGA_IRQS		24
-#define NR_IRQS                 IH_BOARD_BASE + NR_FPGA_IRQS
+#define NR_IRQS                 (IH_BOARD_BASE + NR_FPGA_IRQS)
 
 #ifndef __ASSEMBLY__
 void fpga_write(unsigned char val, int reg);

include/asm-arm/arch-pxa/irqs.h

@@ -13,7 +13,7 @@
 
 #define PXA_IRQ(x)	(x)
 
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
 #define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
 #define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
@@ -52,11 +52,27 @@
 #define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
 #define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
 
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
 #define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
 #endif
 
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
+#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
+#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
+#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
+#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
+#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
+#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
+#endif
+
 #define PXA_GPIO_IRQ_BASE	(64)
 #define PXA_GPIO_IRQ_NUM	(128)
 

include/asm-arm/arch-pxa/mfp-pxa300.h

@@ -179,7 +179,7 @@
 #define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
 #define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
 #define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
-#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS01X)
+#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
 #define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
 #define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
 

include/asm-arm/arch-pxa/mfp-pxa320.h

@@ -18,7 +18,7 @@
 #include <asm/arch/mfp.h>
 
 /* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO6, AF0)
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
 #define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
 #define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
 #define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)

include/asm-arm/arch-pxa/mfp.h

@@ -346,23 +346,31 @@ typedef uint32_t mfp_cfg_t;
 #define MFP_CFG_PIN(mfp_cfg)	(((mfp_cfg) >> 16) & 0xffff)
 #define MFP_CFG_VAL(mfp_cfg)	((mfp_cfg) & 0xffff)
 
-#define MFPR_DEFAULT	(0x0000)
+/*
+ * MFP register defaults to
+ *   drive strength fast 3mA (010'b)
+ *   edge detection logic disabled
+ *   alternate function 0
+ */
+#define MFPR_DEFAULT	(0x0840)
 
 #define MFP_CFG(pin, af)		\
 	((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af))
 
 #define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+	((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_DRV_MASK) |\
 	 ((MFP_##drv) << 10) | (MFP_##af))
 
 #define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\
+	((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_LPM_MASK) |\
 	 (((MFP_LPM_##lpm) & 0x3) << 7)  |\
 	 (((MFP_LPM_##lpm) & 0x4) << 12) |\
-	 (((MFP_LPM_##lpm) & 0x8) << 10))
+	 (((MFP_LPM_##lpm) & 0x8) << 10) |\
+	 (MFP_##af))
 
 #define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\
+	((MFP_PIN_##pin << 16) |\
+	 (MFPR_DEFAULT & ~(MFPR_DRV_MASK | MFPR_LPM_MASK)) |\
 	 ((MFP_##drv) << 10) | (MFP_##af) |\
 	 (((MFP_LPM_##lpm) & 0x3) << 7)  |\
 	 (((MFP_LPM_##lpm) & 0x4) << 12) |\

include/asm-arm/arch-pxa/pxa-regs.h

@@ -110,7 +110,10 @@
 #define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
 #define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
 
-#define DRCMR(n)	__REG2(0x40000100, (n)<<2)
+#define DRCMR(n)	(*(((n) < 64) ? \
+			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
 #define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
 #define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
 #define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */