Commit b3f677e5 authored by Tejun Heo's avatar Tejun Heo Committed by Jeff Garzik

sata_inic162x: use IDMA for ATAPI commands

Use IDMA for ATAPI commands.  Write and some misc commands time out
when executed using ATAPI_PROT_DMA but ATAPI_PROT_PIO works fine.  As
PIO is driven by DMA too, it doesn't make any noticeable difference
for native SATA devices.  inic_check_atapi_dma() is implemented to
force PIO for those ATAPI commands.

After this change, sata_inic162x issues all commands using IDMA.
Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 049e8e04
......@@ -192,7 +192,8 @@ struct inic_prd {
struct inic_pkt {
struct inic_cpb cpb;
struct inic_prd prd[LIBATA_MAX_PRD];
struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */
u8 cdb[ATAPI_CDB_LEN];
} __packed;
struct inic_host_priv {
......@@ -361,23 +362,18 @@ static void inic_host_intr(struct ata_port *ap)
goto spurious;
}
if (!ata_is_atapi(qc->tf.protocol)) {
if (likely(idma_stat & IDMA_STAT_DONE)) {
inic_stop_idma(ap);
if (likely(idma_stat & IDMA_STAT_DONE)) {
inic_stop_idma(ap);
/* Depending on circumstances, device error
* isn't reported by IDMA, check it explicitly.
*/
if (unlikely(readb(port_base + PORT_TF_COMMAND) &
(ATA_DF | ATA_ERR)))
qc->err_mask |= AC_ERR_DEV;
/* Depending on circumstances, device error
* isn't reported by IDMA, check it explicitly.
*/
if (unlikely(readb(port_base + PORT_TF_COMMAND) &
(ATA_DF | ATA_ERR)))
qc->err_mask |= AC_ERR_DEV;
ata_qc_complete(qc);
return;
}
} else {
if (likely(ata_sff_host_intr(ap, qc)))
return;
ata_qc_complete(qc);
return;
}
spurious:
......@@ -421,6 +417,19 @@ static irqreturn_t inic_interrupt(int irq, void *dev_instance)
return IRQ_RETVAL(handled);
}
static int inic_check_atapi_dma(struct ata_queued_cmd *qc)
{
/* For some reason ATAPI_PROT_DMA doesn't work for some
* commands including writes and other misc ops. Use PIO
* protocol instead, which BTW is driven by the DMA engine
* anyway, so it shouldn't make much difference for native
* SATA devices.
*/
if (atapi_cmd_type(qc->cdb[0]) == READ)
return 0;
return 1;
}
static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc)
{
struct scatterlist *sg;
......@@ -452,20 +461,21 @@ static void inic_qc_prep(struct ata_queued_cmd *qc)
struct inic_prd *prd = pkt->prd;
bool is_atapi = ata_is_atapi(qc->tf.protocol);
bool is_data = ata_is_data(qc->tf.protocol);
unsigned int cdb_len = 0;
VPRINTK("ENTER\n");
if (is_atapi)
return;
cdb_len = qc->dev->cdb_len;
/* prepare packet, based on initio driver */
memset(pkt, 0, sizeof(struct inic_pkt));
cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN;
if (is_data)
if (is_atapi || is_data)
cpb->ctl_flags |= CPB_CTL_DATA;
cpb->len = cpu_to_le32(qc->nbytes);
cpb->len = cpu_to_le32(qc->nbytes + cdb_len);
cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd));
cpb->device = qc->tf.device;
......@@ -486,6 +496,18 @@ static void inic_qc_prep(struct ata_queued_cmd *qc)
cpb->command = qc->tf.command;
/* don't load ctl - dunno why. it's like that in the initio driver */
/* setup PRD for CDB */
if (is_atapi) {
memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN);
prd->mad = cpu_to_le32(pp->pkt_dma +
offsetof(struct inic_pkt, cdb));
prd->len = cpu_to_le16(cdb_len);
prd->flags = PRD_CDB | PRD_WRITE;
if (!is_data)
prd->flags |= PRD_END;
prd++;
}
/* setup sg table */
if (is_data)
inic_fill_sg(prd, qc);
......@@ -498,16 +520,12 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
void __iomem *port_base = inic_port_base(ap);
if (!ata_is_atapi(qc->tf.protocol)) {
/* fire up the ADMA engine */
writew(HCTL_FTHD0, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
return 0;
}
/* fire up the ADMA engine */
writew(HCTL_FTHD0, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
return ata_sff_qc_issue(qc);
return 0;
}
static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
......@@ -698,6 +716,7 @@ static int inic_port_start(struct ata_port *ap)
static struct ata_port_operations inic_port_ops = {
.inherits = &ata_sff_port_ops,
.check_atapi_dma = inic_check_atapi_dma,
.qc_prep = inic_qc_prep,
.qc_issue = inic_qc_issue,
.qc_fill_rtf = inic_qc_fill_rtf,
......@@ -717,12 +736,6 @@ static struct ata_port_operations inic_port_ops = {
};
static struct ata_port_info inic_port_info = {
/* For some reason, ATAPI_PROT_PIO is broken on this
* controller, and no, PIO_POLLING does't fix it. It somehow
* manages to report the wrong ireason and ignoring ireason
* results in machine lock up. Tell libata to always prefer
* DMA.
*/
.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment