gianfar: Convert gianfar to an of_platform_driver

Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method.  The old way used fields in einfo, which no longer
exists.  The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/powerpc/dts-bindings/fsl/tsec.txt

@@ -2,8 +2,8 @@
 
 The MDIO is a bus to which the PHY devices are connected.  For each
 device that exists on this bus, a child node should be created.  See
-the definition of the PHY node below for an example of how to define
-a PHY.
+the definition of the PHY node in booting-without-of.txt for an example
+of how to define a PHY.
 
 Required properties:
   - reg : Offset and length of the register set for the device
@@ -21,6 +21,14 @@ Example:
 		};
 	};
 
+* TBI Internal MDIO bus
+
+As of this writing, every tsec is associated with an internal TBI PHY.
+This PHY is accessed through the local MDIO bus.  These buses are defined
+similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi".
+The TBI PHYs underneath them are similar to normal PHYs, but the reg property
+is considered instructive, rather than descriptive.  The reg property should
+be chosen so it doesn't interfere with other PHYs on the bus.
 
 * Gianfar-compatible ethernet nodes
 

arch/powerpc/boot/dts/asp834x-redboot.dts

@@ -199,8 +199,26 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
@@ -210,6 +228,7 @@
 			local-mac-address = [ 00 08 e5 11 32 33 ];
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			linux,network-index = <0>;
 		};
@@ -223,6 +242,7 @@
 			local-mac-address = [ 00 08 e5 11 32 34 ];
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			linux,network-index = <1>;
 		};

arch/powerpc/boot/dts/ksi8560.dts

@@ -141,8 +141,26 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+
 		enet0: ethernet@24000 {
 			device_type = "network";
 			model = "TSEC";
@@ -152,6 +170,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&PHY1>;
 		};
 
@@ -164,6 +183,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&PHY2>;
 		};
 

arch/powerpc/boot/dts/mpc8313erdb.dts

@@ -190,6 +190,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 0x8 36 0x8 35 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
 			phy-handle = < &phy1 >;
 			fsl,magic-packet;
 
@@ -210,6 +211,10 @@
 					reg = <0x4>;
 					device_type = "ethernet-phy";
 				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
 			};
 		};
 
@@ -222,9 +227,24 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <34 0x8 33 0x8 32 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
 			phy-handle = < &phy4 >;
 			sleep = <&pmc 0x10000000>;
 			fsl,magic-packet;
+
+			mdio@25520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x25520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+
+
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8315erdb.dts

@@ -206,8 +206,25 @@
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
@@ -217,6 +234,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = < &phy0 >;
 		};
 
@@ -229,6 +247,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = < &phy1 >;
 		};
 

arch/powerpc/boot/dts/mpc8349emitx.dts

@@ -184,6 +184,22 @@
 				reg = <0x1c>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -195,6 +211,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy1c>;
 			linux,network-index = <0>;
 		};
@@ -211,6 +228,7 @@
 			/* Vitesse 7385 isn't on the MDIO bus */
 			fixed-link = <1 1 1000 0 0>;
 			linux,network-index = <1>;
+			tbi-handle = <&tbi1>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8349emitxgp.dts

@@ -163,6 +163,10 @@
 				reg = <0x1c>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -174,6 +178,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy1c>;
 			linux,network-index = <0>;
 		};

arch/powerpc/boot/dts/mpc834x_mds.dts

@@ -185,8 +185,25 @@
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
@@ -196,6 +213,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			linux,network-index = <0>;
 		};
@@ -209,6 +227,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			linux,network-index = <1>;
 		};

arch/powerpc/boot/dts/mpc8377_mds.dts

@@ -193,8 +193,25 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
@@ -205,6 +222,7 @@
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -218,6 +236,7 @@
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy3>;
 		};
 

arch/powerpc/boot/dts/mpc8377_rdb.dts

@@ -211,8 +211,25 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
@@ -223,6 +240,7 @@
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -237,6 +255,7 @@
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
 			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8378_mds.dts

@@ -232,8 +232,25 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
@@ -244,6 +261,7 @@
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -257,6 +275,7 @@
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy3>;
 		};
 

arch/powerpc/boot/dts/mpc8378_rdb.dts

@@ -211,8 +211,25 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";

arch/powerpc/boot/dts/mpc8379_mds.dts

@@ -232,6 +232,22 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -244,6 +260,7 @@
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -257,6 +274,7 @@
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy3>;
 		};
 

arch/powerpc/boot/dts/mpc8379_rdb.dts

@@ -211,6 +211,22 @@
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -223,6 +239,7 @@
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -237,6 +254,7 @@
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
 			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8536ds.dts

@@ -155,6 +155,22 @@
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		usb@22000 {
@@ -186,6 +202,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -199,6 +216,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
 		};

arch/powerpc/boot/dts/mpc8540ads.dts

@@ -150,6 +150,34 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -161,6 +189,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 		};
 
@@ -173,6 +202,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 
@@ -185,6 +215,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <41 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy3>;
 		};
 

arch/powerpc/boot/dts/mpc8541cds.dts

@@ -144,6 +144,22 @@
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -155,6 +171,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 		};
 
@@ -167,6 +184,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/boot/dts/mpc8544ds.dts

@@ -116,8 +116,26 @@
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+
 		dma@21300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -169,6 +187,7 @@
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
 			phy-connection-type = "rgmii-id";
 		};
 
@@ -182,6 +201,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
+			tbi-handle = <&tbi1>;
 			phy-connection-type = "rgmii-id";
 		};
 

arch/powerpc/boot/dts/mpc8548cds.dts

@@ -172,6 +172,46 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@27520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x27520 0x20>;
+
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -183,6 +223,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 		};
 
@@ -195,6 +236,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 
@@ -208,6 +250,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 		};
 
@@ -220,6 +263,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
 		};
  */

arch/powerpc/boot/dts/mpc8555cds.dts

@@ -144,6 +144,22 @@
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -155,6 +171,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 		};
 
@@ -167,6 +184,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/boot/dts/mpc8560ads.dts

@@ -145,6 +145,22 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -156,6 +172,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 		};
 
@@ -168,6 +185,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/boot/dts/mpc8568mds.dts

@@ -179,6 +179,22 @@
 				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -190,6 +206,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
  			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -202,6 +219,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
  			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy3>;
 		};
 

arch/powerpc/boot/dts/mpc8572ds.dts

@@ -225,6 +225,47 @@
 				interrupts = <10 1>;
 				reg = <0x3>;
 			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@27520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x27520 0x20>;
+
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -236,6 +277,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -249,6 +291,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -262,6 +305,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -275,6 +319,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
 			phy-connection-type = "rgmii-id";
 		};

arch/powerpc/boot/dts/mpc8641_hpcn.dts

@@ -205,8 +205,49 @@
 				reg = <3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@27520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x27520 0x20>;
+
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
@@ -216,6 +257,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -229,6 +271,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -242,6 +285,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -255,6 +299,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
 			phy-connection-type = "rgmii-id";
 		};

arch/powerpc/boot/dts/sbc8349.dts

@@ -177,6 +177,22 @@
 				reg = <0x1a>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -188,6 +204,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <32 0x8 33 0x8 34 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			linux,network-index = <0>;
 		};
@@ -201,6 +218,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			linux,network-index = <1>;
 		};

arch/powerpc/boot/dts/sbc8548.dts

@@ -252,6 +252,22 @@
 				reg = <0x1a>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -263,6 +279,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 		};
 
@@ -275,6 +292,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/boot/dts/sbc8560.dts

@@ -168,6 +168,22 @@
 				reg = <0x1c>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -179,6 +195,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 		};
 
@@ -191,6 +208,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/boot/dts/sbc8641d.dts

@@ -222,6 +222,46 @@
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@27520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x27520 0x20>;
+
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -233,6 +273,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -246,6 +287,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -259,6 +301,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -272,6 +315,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
 			phy-connection-type = "rgmii-id";
 		};

arch/powerpc/boot/dts/stx_gp3_8560.dts

@@ -142,6 +142,22 @@
 				reg = <4>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -153,6 +169,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -165,6 +182,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy4>;
 		};
 

arch/powerpc/boot/dts/tqm8540.dts

@@ -155,6 +155,34 @@
 				reg = <3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {

arch/powerpc/boot/dts/tqm8541.dts

@@ -154,6 +154,22 @@
 				reg = <3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -165,6 +181,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -177,6 +194,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/boot/dts/tqm8548-bigflash.dts

@@ -179,6 +179,46 @@
 				reg = <5>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@27520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x27520 0x20>;
+
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -190,6 +230,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -202,6 +243,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 
@@ -214,6 +256,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy3>;
 		};
 
@@ -226,6 +269,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&phy4>;
 		};
 

arch/powerpc/boot/dts/tqm8548.dts

@@ -179,6 +179,46 @@
 				reg = <5>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@27520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x27520 0x20>;
+
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -190,6 +230,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -202,6 +243,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 
@@ -214,6 +256,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy3>;
 		};
 
@@ -226,6 +269,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&phy4>;
 		};
 

arch/powerpc/boot/dts/tqm8555.dts

@@ -154,6 +154,22 @@
 				reg = <3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -165,6 +181,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -177,6 +194,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/boot/dts/tqm8560.dts

@@ -156,6 +156,22 @@
 				reg = <3>;
 				device_type = "ethernet-phy";
 			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x25520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		enet0: ethernet@24000 {
@@ -167,6 +183,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
 		};
 
@@ -179,6 +196,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 		};
 

arch/powerpc/sysdev/fsl_soc.c

@@ -207,236 +207,51 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static int gfar_mdio_of_init_one(struct device_node *np)
-{
-	int k;
-	struct device_node *child = NULL;
-	struct gianfar_mdio_data mdio_data;
-	struct platform_device *mdio_dev;
-	struct resource res;
-	int ret;
-
-	memset(&res, 0, sizeof(res));
-	memset(&mdio_data, 0, sizeof(mdio_data));
-
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret)
-		return ret;
-
-	/* The gianfar device will try to use the same ID created below to find
-	 * this bus, to coordinate register access (since they share).  */
-	mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
-			res.start&0xfffff, &res, 1);
-	if (IS_ERR(mdio_dev))
-		return PTR_ERR(mdio_dev);
-
-	for (k = 0; k < 32; k++)
-		mdio_data.irq[k] = PHY_POLL;
-
-	while ((child = of_get_next_child(np, child)) != NULL) {
-		int irq = irq_of_parse_and_map(child, 0);
-		if (irq != NO_IRQ) {
-			const u32 *id = of_get_property(child, "reg", NULL);
-			mdio_data.irq[*id] = irq;
-		}
-	}
-
-	ret = platform_device_add_data(mdio_dev, &mdio_data,
-				sizeof(struct gianfar_mdio_data));
-	if (ret)
-		platform_device_unregister(mdio_dev);
-
-	return ret;
-}
-
-static int __init gfar_mdio_of_init(void)
-{
-	struct device_node *np = NULL;
-
-	for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
-		gfar_mdio_of_init_one(np);
-
-	/* try the deprecated version */
-	for_each_compatible_node(np, "mdio", "gianfar");
-		gfar_mdio_of_init_one(np);
-
-	return 0;
-}
-
-arch_initcall(gfar_mdio_of_init);
-
-static const char *gfar_tx_intr = "tx";
-static const char *gfar_rx_intr = "rx";
-static const char *gfar_err_intr = "error";
-
-static int __init gfar_of_init(void)
+#ifdef CONFIG_PPC_83xx
+static int __init mpc83xx_wdt_init(void)
 {
+	struct resource r;
 	struct device_node *np;
-	unsigned int i;
-	struct platform_device *gfar_dev;
-	struct resource res;
+	struct platform_device *dev;
+	u32 freq = fsl_get_sys_freq();
 	int ret;
 
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "network", "gianfar")) != NULL;
-	     i++) {
-		struct resource r[4];
-		struct device_node *phy, *mdio;
-		struct gianfar_platform_data gfar_data;
-		const unsigned int *id;
-		const char *model;
-		const char *ctype;
-		const void *mac_addr;
-		const phandle *ph;
-		int n_res = 2;
-
-		if (!of_device_is_available(np))
-			continue;
-
-		memset(r, 0, sizeof(r));
-		memset(&gfar_data, 0, sizeof(gfar_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		of_irq_to_resource(np, 0, &r[1]);
-
-		model = of_get_property(np, "model", NULL);
-
-		/* If we aren't the FEC we have multiple interrupts */
-		if (model && strcasecmp(model, "FEC")) {
-			r[1].name = gfar_tx_intr;
-
-			r[2].name = gfar_rx_intr;
-			of_irq_to_resource(np, 1, &r[2]);
+	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
 
-			r[3].name = gfar_err_intr;
-			of_irq_to_resource(np, 2, &r[3]);
-
-			n_res += 2;
-		}
-
-		gfar_dev =
-		    platform_device_register_simple("fsl-gianfar", i, &r[0],
-						    n_res);
-
-		if (IS_ERR(gfar_dev)) {
-			ret = PTR_ERR(gfar_dev);
-			goto err;
-		}
-
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			memcpy(gfar_data.mac_addr, mac_addr, 6);
-
-		if (model && !strcasecmp(model, "TSEC"))
-			gfar_data.device_flags =
-			    FSL_GIANFAR_DEV_HAS_GIGABIT |
-			    FSL_GIANFAR_DEV_HAS_COALESCE |
-			    FSL_GIANFAR_DEV_HAS_RMON |
-			    FSL_GIANFAR_DEV_HAS_MULTI_INTR;
-		if (model && !strcasecmp(model, "eTSEC"))
-			gfar_data.device_flags =
-			    FSL_GIANFAR_DEV_HAS_GIGABIT |
-			    FSL_GIANFAR_DEV_HAS_COALESCE |
-			    FSL_GIANFAR_DEV_HAS_RMON |
-			    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
-			    FSL_GIANFAR_DEV_HAS_CSUM |
-			    FSL_GIANFAR_DEV_HAS_VLAN |
-			    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
-
-		ctype = of_get_property(np, "phy-connection-type", NULL);
-
-		/* We only care about rgmii-id.  The rest are autodetected */
-		if (ctype && !strcmp(ctype, "rgmii-id"))
-			gfar_data.interface = PHY_INTERFACE_MODE_RGMII_ID;
-		else
-			gfar_data.interface = PHY_INTERFACE_MODE_MII;
-
-		if (of_get_property(np, "fsl,magic-packet", NULL))
-			gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		if (ph == NULL) {
-			u32 *fixed_link;
-
-			fixed_link = (u32 *)of_get_property(np, "fixed-link",
-							   NULL);
-			if (!fixed_link) {
-				ret = -ENODEV;
-				goto unreg;
-			}
-
-			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0");
-			gfar_data.phy_id = fixed_link[0];
-		} else {
-			phy = of_find_node_by_phandle(*ph);
-
-			if (phy == NULL) {
-				ret = -ENODEV;
-				goto unreg;
-			}
-
-			mdio = of_get_parent(phy);
-
-			id = of_get_property(phy, "reg", NULL);
-			ret = of_address_to_resource(mdio, 0, &res);
-			if (ret) {
-				of_node_put(phy);
-				of_node_put(mdio);
-				goto unreg;
-			}
-
-			gfar_data.phy_id = *id;
-			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
-				 (unsigned long long)res.start&0xfffff);
+	if (!np) {
+		ret = -ENODEV;
+		goto nodev;
+	}
 
-			of_node_put(phy);
-			of_node_put(mdio);
-		}
+	memset(&r, 0, sizeof(r));
 
-		/* Get MDIO bus controlled by this eTSEC, if any.  Normally only
-		 * eTSEC 1 will control an MDIO bus, not necessarily the same
-		 * bus that its PHY is on ('mdio' above), so we can't just use
-		 * that.  What we do is look for a gianfar mdio device that has
-		 * overlapping registers with this device.  That's really the
-		 * whole point, to find the device sharing our registers to
-		 * coordinate access with it.
-		 */
-		for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") {
-			if (of_address_to_resource(mdio, 0, &res))
-				continue;
-
-			if (res.start >= r[0].start && res.end <= r[0].end) {
-				/* Get the ID the mdio bus platform device was
-				 * registered with.  gfar_data.bus_id is
-				 * different because it's for finding a PHY,
-				 * while this is for finding a MII bus.
-				 */
-				gfar_data.mdio_bus = res.start&0xfffff;
-				of_node_put(mdio);
-				break;
-			}
-		}
+	ret = of_address_to_resource(np, 0, &r);
+	if (ret)
+		goto err;
 
-		ret =
-		    platform_device_add_data(gfar_dev, &gfar_data,
-					     sizeof(struct
-						    gianfar_platform_data));
-		if (ret)
-			goto unreg;
+	dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
+	if (IS_ERR(dev)) {
+		ret = PTR_ERR(dev);
+		goto err;
 	}
 
+	ret = platform_device_add_data(dev, &freq, sizeof(freq));
+	if (ret)
+		goto unreg;
+
+	of_node_put(np);
 	return 0;
 
 unreg:
-	platform_device_unregister(gfar_dev);
+	platform_device_unregister(dev);
 err:
+	of_node_put(np);
+nodev:
 	return ret;
 }
 
-arch_initcall(gfar_of_init);
+arch_initcall(mpc83xx_wdt_init);
+#endif
 
 static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {

drivers/net/gianfar.h

@@ -657,6 +657,19 @@ struct gfar {
 
 };
 
+/* Flags related to gianfar device features */
+#define FSL_GIANFAR_DEV_HAS_GIGABIT		0x00000001
+#define FSL_GIANFAR_DEV_HAS_COALESCE		0x00000002
+#define FSL_GIANFAR_DEV_HAS_RMON		0x00000004
+#define FSL_GIANFAR_DEV_HAS_MULTI_INTR		0x00000008
+#define FSL_GIANFAR_DEV_HAS_CSUM		0x00000010
+#define FSL_GIANFAR_DEV_HAS_VLAN		0x00000020
+#define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH	0x00000040
+#define FSL_GIANFAR_DEV_HAS_PADDING		0x00000080
+#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET	0x00000100
+#define FSL_GIANFAR_DEV_HAS_BD_STASHING		0x00000200
+#define FSL_GIANFAR_DEV_HAS_BUF_STASHING	0x00000400
+
 /* Struct stolen almost completely (and shamelessly) from the FCC enet source
  * (Ok, that's not so true anymore, but there is a family resemblence)
  * The GFAR buffer descriptors track the ring buffers.  The rx_bd_base
@@ -694,6 +707,7 @@ struct gfar_private {
 	/* RX Locked fields */
 	spinlock_t rxlock;
 
+	struct device_node *node;
 	struct net_device *dev;
 	struct napi_struct napi;
 
@@ -733,6 +747,9 @@ struct gfar_private {
 	/* Bitfield update lock */
 	spinlock_t bflock;
 
+	phy_interface_t interface;
+	char	phy_bus_id[BUS_ID_SIZE];
+	u32 device_flags;
 	unsigned char vlan_enable:1,
 		rx_csum_enable:1,
 		extended_hash:1,
@@ -744,11 +761,9 @@ struct gfar_private {
 	unsigned int interruptReceive;
 	unsigned int interruptError;
 
-	/* info structure initialized by platform code */
-	struct gianfar_platform_data *einfo;
-
 	/* PHY stuff */
 	struct phy_device *phydev;
+	struct phy_device *tbiphy;
 	struct mii_bus *mii_bus;
 	int oldspeed;
 	int oldduplex;

drivers/net/gianfar_ethtool.c

@@ -121,7 +121,7 @@ static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON)
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON)
 		memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN);
 	else
 		memcpy(buf, stat_gstrings,
@@ -138,7 +138,7 @@ static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
 	struct gfar_private *priv = netdev_priv(dev);
 	u64 *extra = (u64 *) & priv->extra_stats;
 
-	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
 		u32 __iomem *rmon = (u32 __iomem *) & priv->regs->rmon;
 		struct gfar_stats *stats = (struct gfar_stats *) buf;
 
@@ -158,7 +158,7 @@ static int gfar_sset_count(struct net_device *dev, int sset)
 
 	switch (sset) {
 	case ETH_SS_STATS:
-		if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON)
+		if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON)
 			return GFAR_STATS_LEN;
 		else
 			return GFAR_EXTRA_STATS_LEN;
@@ -280,7 +280,7 @@ static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
+	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
 		return -EOPNOTSUPP;
 
 	if (NULL == priv->phydev)
@@ -332,7 +332,7 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
+	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
 		return -EOPNOTSUPP;
 
 	/* Set up rx coalescing */
@@ -482,7 +482,7 @@ static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
 	unsigned long flags;
 	int err = 0;
 
-	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
+	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return -EOPNOTSUPP;
 
 	if (dev->flags & IFF_UP) {
@@ -515,7 +515,7 @@ static uint32_t gfar_get_rx_csum(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
+	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return 0;
 
 	return priv->rx_csum_enable;
@@ -526,7 +526,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data)
 	unsigned long flags;
 	struct gfar_private *priv = netdev_priv(dev);
 
-	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
+	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return -EOPNOTSUPP;
 
 	spin_lock_irqsave(&priv->txlock, flags);
@@ -547,7 +547,7 @@ static uint32_t gfar_get_tx_csum(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
+	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return 0;
 
 	return (dev->features & NETIF_F_IP_CSUM) != 0;
@@ -570,7 +570,7 @@ static void gfar_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) {
+	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) {
 		wol->supported = WAKE_MAGIC;
 		wol->wolopts = priv->wol_en ? WAKE_MAGIC : 0;
 	} else {
@@ -583,7 +583,7 @@ static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
 
-	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
+	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
 	    wol->wolopts != 0)
 		return -EINVAL;
 

drivers/net/gianfar_mii.c

@@ -34,6 +34,8 @@
 #include <linux/crc32.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -150,19 +152,83 @@ static int gfar_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
+/* Allocate an array which provides irq #s for each PHY on the given bus */
+static int *create_irq_map(struct device_node *np)
+{
+	int *irqs;
+	int i;
+	struct device_node *child = NULL;
+
+	irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+
+	if (!irqs)
+		return NULL;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		irqs[i] = PHY_POLL;
+
+	while ((child = of_get_next_child(np, child)) != NULL) {
+		int irq = irq_of_parse_and_map(child, 0);
+		const u32 *id;
+
+		if (irq == NO_IRQ)
+			continue;
+
+		id = of_get_property(child, "reg", NULL);
+
+		if (!id)
+			continue;
+
+		if (*id < PHY_MAX_ADDR && *id >= 0)
+			irqs[*id] = irq;
+		else
+			printk(KERN_WARNING "%s: "
+					"%d is not a valid PHY address\n",
+					np->full_name, *id);
+	}
+
+	return irqs;
+}
+
+
+void gfar_mdio_bus_name(char *name, struct device_node *np)
+{
+	const u32 *reg;
+
+	reg = of_get_property(np, "reg", NULL);
 
-static int gfar_mdio_probe(struct device *dev)
+	snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+}
+
+/* Scan the bus in reverse, looking for an empty spot */
+static int gfar_mdio_find_free(struct mii_bus *new_bus)
+{
+	int i;
+
+	for (i = PHY_MAX_ADDR; i > 0; i--) {
+		u32 phy_id;
+
+		if (get_phy_id(new_bus, i, &phy_id))
+			return -1;
+
+		if (phy_id == 0xffffffff)
+			break;
+	}
+
+	return i;
+}
+
+static int gfar_mdio_probe(struct of_device *ofdev,
+		const struct of_device_id *match)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct gianfar_mdio_data *pdata;
 	struct gfar_mii __iomem *regs;
 	struct gfar __iomem *enet_regs;
 	struct mii_bus *new_bus;
-	struct resource *r;
-	int i, err = 0;
-
-	if (NULL == dev)
-		return -EINVAL;
+	int err = 0;
+	u64 addr, size;
+	struct device_node *np = ofdev->node;
+	struct device_node *tbi;
+	int tbiaddr = -1;
 
 	new_bus = mdiobus_alloc();
 	if (NULL == new_bus)
@@ -172,31 +238,28 @@ static int gfar_mdio_probe(struct device *dev)
 	new_bus->read = &gfar_mdio_read,
 	new_bus->write = &gfar_mdio_write,
 	new_bus->reset = &gfar_mdio_reset,
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
-
-	pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
-
-	if (NULL == pdata) {
-		printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
-		return -ENODEV;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	gfar_mdio_bus_name(new_bus->id, np);
 
 	/* Set the PHY base address */
-	regs = ioremap(r->start, sizeof (struct gfar_mii));
+	addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
+	regs = ioremap(addr, size);
 
 	if (NULL == regs) {
 		err = -ENOMEM;
-		goto reg_map_fail;
+		goto err_free_bus;
 	}
 
 	new_bus->priv = (void __force *)regs;
 
-	new_bus->irq = pdata->irq;
+	new_bus->irq = create_irq_map(np);
+
+	if (new_bus->irq == NULL) {
+		err = -ENOMEM;
+		goto err_unmap_regs;
+	}
 
-	new_bus->parent = dev;
-	dev_set_drvdata(dev, new_bus);
+	new_bus->parent = &ofdev->dev;
+	dev_set_drvdata(&ofdev->dev, new_bus);
 
 	/*
 	 * This is mildly evil, but so is our hardware for doing this.
@@ -206,96 +269,109 @@ static int gfar_mdio_probe(struct device *dev)
 	enet_regs = (struct gfar __iomem *)
 		((char *)regs - offsetof(struct gfar, gfar_mii_regs));
 
-	/* Scan the bus, looking for an empty spot for TBIPA */
-	gfar_write(&enet_regs->tbipa, 0);
-	for (i = PHY_MAX_ADDR; i > 0; i--) {
-		u32 phy_id;
+	for_each_child_of_node(np, tbi) {
+		if (!strncmp(tbi->type, "tbi-phy", 8))
+			break;
+	}
 
-		err = get_phy_id(new_bus, i, &phy_id);
-		if (err)
-			goto bus_register_fail;
+	if (tbi) {
+		const u32 *prop = of_get_property(tbi, "reg", NULL);
 
-		if (phy_id == 0xffffffff)
-			break;
+		if (prop)
+			tbiaddr = *prop;
 	}
 
-	/* The bus is full.  We don't support using 31 PHYs, sorry */
-	if (i == 0) {
+	if (tbiaddr == -1) {
+		gfar_write(&enet_regs->tbipa, 0);
+
+		tbiaddr = gfar_mdio_find_free(new_bus);
+	}
+
+	/*
+	 * We define TBIPA at 0 to be illegal, opting to fail for boards that
+	 * have PHYs at 1-31, rather than change tbipa and rescan.
+	 */
+	if (tbiaddr == 0) {
 		err = -EBUSY;
 
-		goto bus_register_fail;
+		goto err_free_irqs;
 	}
 
-	gfar_write(&enet_regs->tbipa, i);
+	gfar_write(&enet_regs->tbipa, tbiaddr);
+
+	/*
+	 * The TBIPHY-only buses will find PHYs at every address,
+	 * so we mask them all but the TBI
+	 */
+	if (!of_device_is_compatible(np, "fsl,gianfar-mdio"))
+		new_bus->phy_mask = ~(1 << tbiaddr);
 
 	err = mdiobus_register(new_bus);
 
-	if (0 != err) {
+	if (err != 0) {
 		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
 				new_bus->name);
-		goto bus_register_fail;
+		goto err_free_irqs;
 	}
 
 	return 0;
 
-bus_register_fail:
+err_free_irqs:
+	kfree(new_bus->irq);
+err_unmap_regs:
 	iounmap(regs);
-reg_map_fail:
+err_free_bus:
 	mdiobus_free(new_bus);
 
 	return err;
 }
 
 
-static int gfar_mdio_remove(struct device *dev)
+static int gfar_mdio_remove(struct of_device *ofdev)
 {
-	struct mii_bus *bus = dev_get_drvdata(dev);
+	struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
 
 	mdiobus_unregister(bus);
 
-	dev_set_drvdata(dev, NULL);
+	dev_set_drvdata(&ofdev->dev, NULL);
 
 	iounmap((void __iomem *)bus->priv);
 	bus->priv = NULL;
+	kfree(bus->irq);
 	mdiobus_free(bus);
 
 	return 0;
 }
 
-static struct device_driver gianfar_mdio_driver = {
+static struct of_device_id gfar_mdio_match[] =
+{
+	{
+		.compatible = "fsl,gianfar-mdio",
+	},
+	{
+		.compatible = "fsl,gianfar-tbi",
+	},
+	{
+		.type = "mdio",
+		.compatible = "gianfar",
+	},
+	{},
+};
+
+static struct of_platform_driver gianfar_mdio_driver = {
 	.name = "fsl-gianfar_mdio",
-	.bus = &platform_bus_type,
+	.match_table = gfar_mdio_match,
+
 	.probe = gfar_mdio_probe,
 	.remove = gfar_mdio_remove,
 };
 
-static int match_mdio_bus(struct device *dev, void *data)
-{
-	const struct gfar_private *priv = data;
-	const struct platform_device *pdev = to_platform_device(dev);
-
-	return !strcmp(pdev->name, gianfar_mdio_driver.name) &&
-		pdev->id == priv->einfo->mdio_bus;
-}
-
-/* Given a gfar_priv structure, find the mii_bus controlled by this device (not
- * necessarily the same as the bus the gfar's PHY is on), if one exists.
- * Normally only the first gianfar controls a mii_bus.  */
-struct mii_bus *gfar_get_miibus(const struct gfar_private *priv)
-{
-	/*const*/ struct device *d;
-
-	d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv,
-			    match_mdio_bus);
-	return d ? dev_get_drvdata(d) : NULL;
-}
-
 int __init gfar_mdio_init(void)
 {
-	return driver_register(&gianfar_mdio_driver);
+	return of_register_platform_driver(&gianfar_mdio_driver);
 }
 
 void gfar_mdio_exit(void)
 {
-	driver_unregister(&gianfar_mdio_driver);
+	of_unregister_platform_driver(&gianfar_mdio_driver);
 }

drivers/net/gianfar_mii.h

@@ -49,4 +49,6 @@ int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum);
 struct mii_bus *gfar_get_miibus(const struct gfar_private *priv);
 int __init gfar_mdio_init(void);
 void gfar_mdio_exit(void);
+
+void gfar_mdio_bus_name(char *name, struct device_node *np);
 #endif /* GIANFAR_PHY_H */

include/linux/fsl_devices.h

@@ -47,12 +47,7 @@
 struct gianfar_platform_data {
 	/* device specific information */
 	u32	device_flags;
-	/* board specific information */
-	u32	board_flags;
-	int	mdio_bus;			/* Bus controlled by us */
-	char	bus_id[MII_BUS_ID_SIZE];	/* Bus PHY is on */
-	u32	phy_id;
-	u8	mac_addr[6];
+	char	bus_id[BUS_ID_SIZE];
 	phy_interface_t interface;
 };
 
@@ -61,17 +56,6 @@ struct gianfar_mdio_data {
 	int	irq[32];
 };
 
-/* Flags related to gianfar device features */
-#define FSL_GIANFAR_DEV_HAS_GIGABIT		0x00000001
-#define FSL_GIANFAR_DEV_HAS_COALESCE		0x00000002
-#define FSL_GIANFAR_DEV_HAS_RMON		0x00000004
-#define FSL_GIANFAR_DEV_HAS_MULTI_INTR		0x00000008
-#define FSL_GIANFAR_DEV_HAS_CSUM		0x00000010
-#define FSL_GIANFAR_DEV_HAS_VLAN		0x00000020
-#define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH	0x00000040
-#define FSL_GIANFAR_DEV_HAS_PADDING		0x00000080
-#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET	0x00000100
-
 /* Flags in gianfar_platform_data */
 #define FSL_GIANFAR_BRD_HAS_PHY_INTR	0x00000001 /* set or use a timer */
 #define FSL_GIANFAR_BRD_IS_REDUCED	0x00000002 /* Set if RGMII, RMII */